4. Upgrade 2.3.2-RELEASE-p1 to 2.3.3 failed

Upgrade 2.3.2-RELEASE-p1 to 2.3.3 failed

  • M

    Hi,

    I tried to upgrade release 2.3.2 to 2.3.3. multiple times but it failed all the time.
    The upgrade seems to go well, but after the reboot I am still on release 2.3.2-RELEASE-p1

    I only see this conflict during the upgrade process

    ==>

    Checking integrity… done (1 conflicting)
      - openvpn23-2.3.14 [pfSense] conflicts with openvpn-2.3.11 [installed] on /usr/local/include/openvpn-plugin.h

    <==

    Here the full l upgrade log

    ==>

    *** Welcome to pfSense 2.3.2-RELEASE-p1 (i386 nanobsd) on xxx ***

    INET (wan)      -> pppoe4    -> v4/PPPoE: xxx
    LAN1 (opt1)    -> vr0_vlanxx -> v4: xx
                                      v6: xx
    WIFI (opt2)    -> ath0_xx ->    v4: xx
                                      v6: xx
    DMZ1 (opt3)    -> vr1_xx  ->    v4: xx
                                      v6: xx
    DMZ2 (opt4)    -> vr1_xx  ->    v4: xx
                                      v6: xx

    1. Logout (SSH only)                  9) pfTop
    2. Assign Interfaces                10) Filter Logs
    3. Set interface(s) IP address      11) Restart webConfigurator
    4. Reset webConfigurator password    12) PHP shell + pfSense tools
    5. Reset to factory defaults        13) Update from console
    6. Reboot system                    14) Disable Secure Shell (sshd)
    7. Halt system                      15) Restore recent configuration
    8. Ping host                        16) Restart PHP-FPM
    9. Shell

    Enter an option: 13

    Updating repositories metadata…
    Updating pfSense-core repository catalogue...
    pfSense-core repository is up-to-date.
    Updating pfSense repository catalogue...
    pfSense repository is up-to-date.
    All repositories are up-to-date.

    Unlocking package pfSense-kernel-pfSense_wrap... done.
    **** WARNING ****
    Duplicate slice required!!

    Before starting the upgrade process, the currently mounted nanobsd partition
    needs to be cloned to the secondary partition, where the update will happen

    After installation a reboot will be required to switch partition.

    Proceed with upgrade? (y/N) y

    Cleaning secondary partition... done.
    Duplicating current slice...
    Restoring slice label... done.
    Testing duplicated partition integrity... done.
    Mounting second partition to run upgrade... done.
    Copying resolv.conf to upgrade partition... done.
    Downloading upgrade packages...
    Updating pfSense-core repository catalogue...
    pfSense-core repository is up-to-date.
    Updating pfSense repository catalogue...
    pfSense repository is up-to-date.
    All repositories are up-to-date.
    Checking for upgrades (83 candidates): .......... done
    Processing candidates (83 candidates): .......... done
    The following 88 package(s) will be affected (of 0 checked):

    New packages to be INSTALLED:
            libnghttp2: 1.18.0 [pfSense]
            openvpn23: 2.3.14 [pfSense]
            norm: 1.5r6 [pfSense]
            libwww: 5.4.0_6 [pfSense]
            json-c: 0.12.1 [pfSense]

    Installed packages to be UPGRADED:
            zabbix3-proxy: 3.0.2 -> 3.0.5 [pfSense]
            zabbix3-agent: 3.0.2 -> 3.0.5 [pfSense]
            wol: 0.7.1_2 -> 0.7.1_3 [pfSense]
            unbound: 1.5.9 -> 1.6.0 [pfSense]
            uclcmd: 0.1 -> 0.1_1 [pfSense]
            strongswan: 5.5.0 -> 5.5.1 [pfSense]
            sqlite3: 3.13.0 -> 3.15.1_1 [pfSense]
            python27: 2.7.12 -> 2.7.13_1 [pfSense]
            php56-zlib: 5.6.26 -> 5.6.30 [pfSense]
            php56-xmlwriter: 5.6.26 -> 5.6.30 [pfSense]
            php56-xmlreader: 5.6.26 -> 5.6.30 [pfSense]
            php56-xml: 5.6.26 -> 5.6.30 [pfSense]
            php56-tokenizer: 5.6.26 -> 5.6.30 [pfSense]
            php56-sysvshm: 5.6.26 -> 5.6.30 [pfSense]
            php56-sysvsem: 5.6.26 -> 5.6.30 [pfSense]
            php56-sysvmsg: 5.6.26 -> 5.6.30 [pfSense]
            php56-sqlite3: 5.6.26 -> 5.6.30 [pfSense]
            php56-sockets: 5.6.26 -> 5.6.30 [pfSense]
            php56-simplexml: 5.6.26 -> 5.6.30 [pfSense]
            php56-shmop: 5.6.26 -> 5.6.30 [pfSense]
            php56-session: 5.6.26 -> 5.6.30 [pfSense]
            php56-readline: 5.6.26 -> 5.6.30 [pfSense]
            php56-posix: 5.6.26 -> 5.6.30 [pfSense]
            php56-pfSense-module: 0.12 -> 0.13 [pfSense]
            php56-pdo_sqlite: 5.6.26 -> 5.6.30 [pfSense]
            php56-pdo: 5.6.26 -> 5.6.30 [pfSense]
            php56-pcntl: 5.6.26 -> 5.6.30 [pfSense]
            php56-openssl: 5.6.26 -> 5.6.30 [pfSense]
            php56-opcache: 5.6.26_1 -> 5.6.30 [pfSense]
            php56-mcrypt: 5.6.26 -> 5.6.30 [pfSense]
            php56-mbstring: 5.6.26 -> 5.6.30 [pfSense]
            php56-ldap: 5.6.26 -> 5.6.30 [pfSense]
            php56-json: 5.6.26 -> 5.6.30 [pfSense]
            php56-hash: 5.6.26 -> 5.6.30 [pfSense]
            php56-gettext: 5.6.26 -> 5.6.30 [pfSense]
            php56-filter: 5.6.26 -> 5.6.30 [pfSense]
            php56-dom: 5.6.26 -> 5.6.30 [pfSense]
            php56-curl: 5.6.26 -> 5.6.30 [pfSense]
            php56-ctype: 5.6.26 -> 5.6.30 [pfSense]
            php56-bz2: 5.6.26 -> 5.6.30 [pfSense]
            php56-bcmath: 5.6.26 -> 5.6.30 [pfSense]
            php56: 5.6.26 -> 5.6.30 [pfSense]
            php-xdebug: 2.4.0 -> 2.4.1_1 [pfSense]
            php-suhosin: 0.9.38 -> 0.9.38_3 [pfSense]
            pftop: 0.7_6 -> 0.7_7 [pfSense]
            pfSense-rc: 2.3.2_1 -> 2.3.3 [pfSense-core]
            pfSense-kernel-pfSense_wrap: 2.3.2_1 -> 2.3.3 [pfSense-core]
            pfSense-default-config-serial: 2.3.2_1 -> 2.3.3 [pfSense-core]
            pfSense-base-nanobsd: 2.3.2_1 -> 2.3.3 [pfSense-core]
            pfSense-Status_Monitoring: 1.4.4_2 -> 1.6.1_3 [pfSense]
            pfSense: 2.3.2_1 -> 2.3.3 [pfSense]
            perl5: 5.20.3_15 -> 5.24.1.r4_1 [pfSense]
            pecl-zmq: 1.1.3_1 -> 1.1.3_2 [pfSense]
            pecl-ssh2: 0.12 -> 0.13 [pfSense]
            pecl-rrd: 1.1.3_3 -> 1.1.3_4 [pfSense]
            pecl-radius: 1.3.0 -> 1.4.0.b1 [pfSense]
            pcre: 8.39 -> 8.39_1 [pfSense]
            p7zip: 15.14_1 -> 16.02 [pfSense]
            ntp: 4.2.8p8 -> 4.2.8p9_1 [pfSense]
            nginx: 1.10.1,2 -> 1.10.2_3,2 [pfSense]
            nettle: 3.2 -> 3.3 [pfSense]
            links: 2.9,1 -> 2.13,1 [pfSense]
            libzmq4: 4.1.4_1 -> 4.1.5 [pfSense]
            libssh2: 1.7.0,2 -> 1.8.0,2 [pfSense]
            libsodium: 1.0.8 -> 1.0.11_1 [pfSense]
            libiconv: 1.14_9 -> 1.14_10 [pfSense]
            isc-dhcp43-server: 4.3.4 -> 4.3.5 [pfSense]
            isc-dhcp43-relay: 4.3.4_1 -> 4.3.5 [pfSense]
            isc-dhcp43-client: 4.3.4 -> 4.3.5 [pfSense]
            indexinfo: 0.2.4 -> 0.2.6 [pfSense]
            idnkit: 1.0_5 -> 1.0_6 [pfSense]
            glib: 2.46.2 -> 2.46.2_4 [pfSense]
            gettext-runtime: 0.19.8.1 -> 0.19.8.1_1 [pfSense]
            fping: 3.10 -> 3.13 [pfSense]
            expat: 2.1.1_2 -> 2.2.0_1 [pfSense]
            dhcp6: 20080615_7 -> 20080615.1 [pfSense]
            curl: 7.50.3 -> 7.52.1_1 [pfSense]
            ca_root_nss: 3.25 -> 3.28.1 [pfSense]
            bind-tools: 9.10.4P2 -> 9.11.0P3 [pfSense]

    Installed packages to be REINSTALLED:
            scponly-4.8.20110526_2 [pfSense] (options changed)
            rrdtool-1.6.0_1 [pfSense] (direct dependency changed: perl5)
            net-snmp-5.7.3_11 [pfSense] (options changed)
            miniupnpd-1.9.20160113,1 [pfSense] (options changed)

    Number of packages to be installed: 5
    Number of packages to be upgraded: 79
    Number of packages to be reinstalled: 4

    The process will require 20 MiB more space.
    86 MiB to be downloaded.
    Fetching zabbix3-proxy-3.0.5.txz: …....... done
    Fetching zabbix3-agent-3.0.5.txz: .......... done
    Fetching wol-0.7.1_3.txz: ... done
    Fetching unbound-1.6.0.txz: .......... done
    Fetching uclcmd-0.1_1.txz: .. done
    Fetching strongswan-5.5.1.txz: .......... done
    Fetching sqlite3-3.15.1_1.txz: .......... done
    Fetching scponly-4.8.20110526_2.txz: .. done
    Fetching rrdtool-1.6.0_1.txz: .......... done
    Fetching python27-2.7.13_1.txz: .......... done
    Fetching php56-zlib-5.6.30.txz: .. done
    Fetching php56-xmlwriter-5.6.30.txz: .. done
    Fetching php56-xmlreader-5.6.30.txz: .. done
    Fetching php56-xml-5.6.30.txz: .. done
    Fetching php56-tokenizer-5.6.30.txz: . done
    Fetching php56-sysvshm-5.6.30.txz: . done
    Fetching php56-sysvsem-5.6.30.txz: . done
    Fetching php56-sysvmsg-5.6.30.txz: . done
    Fetching php56-sqlite3-5.6.30.txz: .. done
    Fetching php56-sockets-5.6.30.txz: .... done
    Fetching php56-simplexml-5.6.30.txz: ... done
    Fetching php56-shmop-5.6.30.txz: . done
    Fetching php56-session-5.6.30.txz: ... done
    Fetching php56-readline-5.6.30.txz: .. done
    Fetching php56-posix-5.6.30.txz: . done
    Fetching php56-pfSense-module-0.13.txz: ... done
    Fetching php56-pdo_sqlite-5.6.30.txz: .. done
    Fetching php56-pdo-5.6.30.txz: ..... done
    Fetching php56-pcntl-5.6.30.txz: .. done
    Fetching php56-openssl-5.6.30.txz: ..... done
    Fetching php56-opcache-5.6.30.txz: ...... done
    Fetching php56-mcrypt-5.6.30.txz: .. done
    Fetching php56-mbstring-5.6.30.txz: .......... done
    Fetching php56-ldap-5.6.30.txz: .. done
    Fetching php56-json-5.6.30.txz: .. done
    Fetching php56-hash-5.6.30.txz: .......... done
    Fetching php56-gettext-5.6.30.txz: . done
    Fetching php56-filter-5.6.30.txz: .. done
    Fetching php56-dom-5.6.30.txz: ...... done
    Fetching php56-curl-5.6.30.txz: ... done
    Fetching php56-ctype-5.6.30.txz: . done
    Fetching php56-bz2-5.6.30.txz: .. done
    Fetching php56-bcmath-5.6.30.txz: .. done
    Fetching php56-5.6.30.txz: .......... done
    Fetching php-xdebug-2.4.1_1.txz: ......... done
    Fetching php-suhosin-0.9.38_3.txz: ...... done
    Fetching pftop-0.7_7.txz: ...... done
    Fetching pfSense-rc-2.3.3.txz: . done
    Fetching pfSense-kernel-pfSense_wrap-2.3.3.txz: .......... done
    Fetching pfSense-default-config-serial-2.3.3.txz: . done
    Fetching pfSense-base-nanobsd-2.3.3.txz: .......... done
    Fetching pfSense-Status_Monitoring-1.6.1_3.txz: .. done
    Fetching pfSense-2.3.3.txz: . done
    Fetching perl5-5.24.1.r4_1.txz: .......... done
    Fetching pecl-zmq-1.1.3_2.txz: ... done
    Fetching pecl-ssh2-0.13.txz: ... done
    Fetching pecl-rrd-1.1.3_4.txz: .. done
    Fetching pecl-radius-1.4.0.b1.txz: ... done
    Fetching pcre-8.39_1.txz: .......... done
    Fetching p7zip-16.02.txz: .......... done
    Fetching ntp-4.2.8p9_1.txz: .......... done
    Fetching nginx-1.10.2_3,2.txz: .......... done
    Fetching nettle-3.3.txz: .......... done
    Fetching net-snmp-5.7.3_11.txz: .......... done
    Fetching miniupnpd-1.9.20160113,1.txz: ...... done
    Fetching links-2.13,1.txz: .......... done
    Fetching libzmq4-4.1.5.txz: .......... done
    Fetching libssh2-1.8.0,2.txz: .......... done
    Fetching libsodium-1.0.11_1.txz: .......... done
    Fetching libiconv-1.14_10.txz: .......... done
    Fetching isc-dhcp43-server-4.3.5.txz: .......... done
    Fetching isc-dhcp43-relay-4.3.5.txz: .......... done
    Fetching isc-dhcp43-client-4.3.5.txz: .......... done
    Fetching indexinfo-0.2.6.txz: . done
    Fetching idnkit-1.0_6.txz: .......... done
    Fetching glib-2.46.2_4.txz: .......... done
    Fetching gettext-runtime-0.19.8.1_1.txz: .......... done
    Fetching fping-3.13.txz: ... done
    Fetching expat-2.2.0_1.txz: .......... done
    Fetching dhcp6-20080615.1.txz: .......... done
    Fetching curl-7.52.1_1.txz: .......... done
    Fetching ca_root_nss-3.28.1.txz: .......... done
    Fetching bind-tools-9.11.0P3.txz: .......... done
    Fetching libnghttp2-1.18.0.txz: .......... done
    Fetching openvpn23-2.3.14.txz: .......... done
    Fetching norm-1.5r6.txz: .......... done
    Fetching libwww-5.4.0_6.txz: .......... done
    Fetching json-c-0.12.1.txz: .... done
    Checking integrity... done (1 conflicting)
      - openvpn23-2.3.14 [pfSense] conflicts with openvpn-2.3.11 [installed] on /usr/local/include/openvpn-plugin.h
    Checking integrity… done (0 conflicting)
    Conflicts with the existing packages have been found.
    One more solver iteration is needed to resolve them.
    The following 89 package(s) will be affected (of 0 checked):

    Installed packages to be REMOVED:
            openvpn-2.3.11

    New packages to be INSTALLED:
            libnghttp2: 1.18.0 [pfSense]
            norm: 1.5r6 [pfSense]
            libwww: 5.4.0_6 [pfSense]
            json-c: 0.12.1 [pfSense]
            openvpn23: 2.3.14 [pfSense]

    Installed packages to be UPGRADED:
            indexinfo: 0.2.4 -> 0.2.6 [pfSense]
            gettext-runtime: 0.19.8.1 -> 0.19.8.1_1 [pfSense]
            python27: 2.7.12 -> 2.7.13_1 [pfSense]
            perl5: 5.20.3_15 -> 5.24.1.r4_1 [pfSense]
            pcre: 8.39 -> 8.39_1 [pfSense]
            libiconv: 1.14_9 -> 1.14_10 [pfSense]
            glib: 2.46.2 -> 2.46.2_4 [pfSense]
            expat: 2.1.1_2 -> 2.2.0_1 [pfSense]
            ca_root_nss: 3.25 -> 3.28.1 [pfSense]
            unbound: 1.5.9 -> 1.6.0 [pfSense]
            php56: 5.6.26 -> 5.6.30 [pfSense]
            libsodium: 1.0.8 -> 1.0.11_1 [pfSense]
            curl: 7.50.3 -> 7.52.1_1 [pfSense]
            strongswan: 5.5.0 -> 5.5.1 [pfSense]
            sqlite3: 3.13.0 -> 3.15.1_1 [pfSense]
            php56-session: 5.6.26 -> 5.6.30 [pfSense]
            php56-pdo: 5.6.26 -> 5.6.30 [pfSense]
            php56-dom: 5.6.26 -> 5.6.30 [pfSense]
            pecl-rrd: 1.1.3_3 -> 1.1.3_4 [pfSense]
            nettle: 3.2 -> 3.3 [pfSense]
            libzmq4: 4.1.4_1 -> 4.1.5 [pfSense]
            libssh2: 1.7.0,2 -> 1.8.0,2 [pfSense]
            idnkit: 1.0_5 -> 1.0_6 [pfSense]
            wol: 0.7.1_2 -> 0.7.1_3 [pfSense]
            uclcmd: 0.1 -> 0.1_1 [pfSense]
            php56-zlib: 5.6.26 -> 5.6.30 [pfSense]
            php56-xmlwriter: 5.6.26 -> 5.6.30 [pfSense]
            php56-xmlreader: 5.6.26 -> 5.6.30 [pfSense]
            php56-xml: 5.6.26 -> 5.6.30 [pfSense]
            php56-tokenizer: 5.6.26 -> 5.6.30 [pfSense]
            php56-sysvshm: 5.6.26 -> 5.6.30 [pfSense]
            php56-sysvsem: 5.6.26 -> 5.6.30 [pfSense]
            php56-sysvmsg: 5.6.26 -> 5.6.30 [pfSense]
            php56-sqlite3: 5.6.26 -> 5.6.30 [pfSense]
            php56-sockets: 5.6.26 -> 5.6.30 [pfSense]
            php56-simplexml: 5.6.26 -> 5.6.30 [pfSense]
            php56-shmop: 5.6.26 -> 5.6.30 [pfSense]
            php56-readline: 5.6.26 -> 5.6.30 [pfSense]
            php56-posix: 5.6.26 -> 5.6.30 [pfSense]
            php56-pfSense-module: 0.12 -> 0.13 [pfSense]
            php56-pdo_sqlite: 5.6.26 -> 5.6.30 [pfSense]
            php56-pcntl: 5.6.26 -> 5.6.30 [pfSense]
            php56-openssl: 5.6.26 -> 5.6.30 [pfSense]
            php56-opcache: 5.6.26_1 -> 5.6.30 [pfSense]
            php56-mcrypt: 5.6.26 -> 5.6.30 [pfSense]
            php56-mbstring: 5.6.26 -> 5.6.30 [pfSense]
            php56-ldap: 5.6.26 -> 5.6.30 [pfSense]
            php56-json: 5.6.26 -> 5.6.30 [pfSense]
            php56-hash: 5.6.26 -> 5.6.30 [pfSense]
            php56-gettext: 5.6.26 -> 5.6.30 [pfSense]
            php56-filter: 5.6.26 -> 5.6.30 [pfSense]
            php56-curl: 5.6.26 -> 5.6.30 [pfSense]
            php56-ctype: 5.6.26 -> 5.6.30 [pfSense]
            php56-bz2: 5.6.26 -> 5.6.30 [pfSense]
            php56-bcmath: 5.6.26 -> 5.6.30 [pfSense]
            php-xdebug: 2.4.0 -> 2.4.1_1 [pfSense]
            php-suhosin: 0.9.38 -> 0.9.38_3 [pfSense]
            pftop: 0.7_6 -> 0.7_7 [pfSense]
            pfSense-rc: 2.3.2_1 -> 2.3.3 [pfSense-core]
            pfSense-Status_Monitoring: 1.4.4_2 -> 1.6.1_3 [pfSense]
            pecl-zmq: 1.1.3_1 -> 1.1.3_2 [pfSense]
            pecl-ssh2: 0.12 -> 0.13 [pfSense]
            pecl-radius: 1.3.0 -> 1.4.0.b1 [pfSense]
            ntp: 4.2.8p8 -> 4.2.8p9_1 [pfSense]
            nginx: 1.10.1,2 -> 1.10.2_3,2 [pfSense]
            links: 2.9,1 -> 2.13,1 [pfSense]
            isc-dhcp43-server: 4.3.4 -> 4.3.5 [pfSense]
            isc-dhcp43-relay: 4.3.4_1 -> 4.3.5 [pfSense]
            isc-dhcp43-client: 4.3.4 -> 4.3.5 [pfSense]
            fping: 3.10 -> 3.13 [pfSense]
            dhcp6: 20080615_7 -> 20080615.1 [pfSense]
            bind-tools: 9.10.4P2 -> 9.11.0P3 [pfSense]
            zabbix3-proxy: 3.0.2 -> 3.0.5 [pfSense]
            zabbix3-agent: 3.0.2 -> 3.0.5 [pfSense]
            pfSense-kernel-pfSense_wrap: 2.3.2_1 -> 2.3.3 [pfSense-core]
            pfSense-default-config-serial: 2.3.2_1 -> 2.3.3 [pfSense-core]
            pfSense-base-nanobsd: 2.3.2_1 -> 2.3.3 [pfSense-core]
            pfSense: 2.3.2_1 -> 2.3.3 [pfSense]
            p7zip: 15.14_1 -> 16.02 [pfSense]

    Installed packages to be REINSTALLED:
            rrdtool-1.6.0_1 [pfSense] (direct dependency changed: perl5)
            scponly-4.8.20110526_2 [pfSense] (options changed)
            net-snmp-5.7.3_11 [pfSense] (options changed)
            miniupnpd-1.9.20160113,1 [pfSense] (options changed)

    Number of packages to be removed: 1
    Number of packages to be installed: 5
    Number of packages to be upgraded: 79
    Number of packages to be reinstalled: 4

    The process will require 20 MiB more space.

    Locking package pfSense-pkg-Cron… done.
    Locking package pfSense-pkg-openvpn-client-export... done.
    Locking package pfSense-pkg-zabbix-agent... done.
    Locking package pfSense-pkg-zabbix-proxy... done.
    Unlocking package pfSense-pkg-Cron... done.
    Unlocking package pfSense-pkg-openvpn-client-export... done.
    Unlocking package pfSense-pkg-zabbix-agent... done.
    Unlocking package pfSense-pkg-zabbix-proxy... done.
    Setting secondary partition as active... done.
    Upgrade is complete.  Rebooting in 10 seconds.

    Broadcast Message from root@xxxx
            (/dev/pts/0) at 10:28 CET...

    Upgrade is complete.  Rebooting in 10 seconds.

    Locking package pfSense-kernel-pfSense_wrap... done.
    *** Welcome to pfSense 2.3.2-RELEASE-p1 (i386 nanobsd) on xxx ***

    INET (wan)      -> pppoe4    -> v4/PPPoE: xxx
    LAN1 (opt1)    -> vr0_vlanxx -> v4: xx
                                      v6: xx
    WIFI (opt2)    -> ath0_xx ->    v4: xx
                                      v6: xx
    DMZ1 (opt3)    -> vr1_xx  ->    v4: xx
                                      v6: xx
    DMZ2 (opt4)    -> vr1_xx  ->    v4: xx
                                      v6: xx

    1. Logout (SSH only)                  9) pfTop
    2. Assign Interfaces                10) Filter Logs
    3. Set interface(s) IP address      11) Restart webConfigurator
    4. Reset webConfigurator password    12) PHP shell + pfSense tools
    5. Reset to factory defaults        13) Update from console
    6. Reboot system                    14) Disable Secure Shell (sshd)
    7. Halt system                      15) Restore recent configuration
    8. Ping host                        16) Restart PHP-FPM
    9. Shell

    Enter an option: ERROR: opening '/var/db/rrd/.rrd': No such file or directory
    tar: var/db/rrd/    .xml: Cannot stat: No such file or directory
    Shutdown NOW!
    shutdown: [pid 88185]

    *** FINAL System shutdown message from root@xxx ***

    System going down IMMEDIATELY

    System shutdown time has arrived

    After te reboot I am still on

    2.3.2-RELEASE-p1 (i386)
    built on Tue Sep 27 12:13:32 CDT 2016
    FreeBSD 10.3-RELEASE-p9

    0
  • R

    What bootup slice are you on? (Diagnostics -> NanoBSD)

    0
  • M

    I tried to update from both slices, from slice 1 and 2. I tried multiple times (from the webgui and also from the console)
    The update seems to be succefull, I even got the email saying the update is succesfull and the system is rebooting, But when I login after the reboot the system still seems to be on the 2.3.2 version

    0
  • M

    Hi,

    Any followup on the above please ?
    What should i do to succesfully upgrade ?

    0
  • D
    Banned

    Try

    
pkg delete -f openvpn\*

    Otherwise, doing a fresh reinstall would be a whole lot faster that debugging this junk, especially with the slice duplication on nanobsd.

    0
  • N

    I observed that just the info shown is outdated (on gui as well as on console). What does uname -a give you?

    0
  • M

    Never had problems before with upgrading pfsense

    This is what I am seeing in de upgrade log

    Installed packages to be REINSTALLED:
    scponly-4.8.20110526_2 [pfSense] (options changed)
    rrdtool-1.6.0_1 [pfSense] (direct dependency changed: perl5)
    net-snmp-5.7.3_11 [pfSense] (options changed)
    miniupnpd-1.9.20160113,1 [pfSense] (options changed)

    Number of packages to be installed: 4
    Number of packages to be upgraded: 76
    Number of packages to be reinstalled: 4

    The process will require 20 MiB more space.
    [1/84] Upgrading python27 from 2.7.12 to 2.7.13_1…
    [1/84] Extracting python27-2.7.13_1: Child process pid=86376 terminated abnormally: Killed

    0
  • D
    Banned

    @matthijs:

    [1/84] Extracting python27-2.7.13_1: Child process pid=86376 terminated abnormally: Killed

    Apparently out of RAM. NanoBSD?

    0
  • M

    Yes NanoBSD
    An PC Engines Alix Board (alix2d13)
    Any solution or workarround for this issue ? (maybe removing some packages first? I have zabbix-agent, zabbix-proxy, cron and openvpn-client-export packages installed)

    0
  • M

    No succes (also not with uninstalling packages first) so I did a clean install as adviced

    Thanks !

    0
  • D
    Banned

    Well, the only "solution" is to kill as many services as possible (and that includes ntpd, nginx etc.)

    0
Log in to reply
 

Products

Services

Support

News

Resources

Company

Our Mission

We provide leading-edge network security at a fair price - regardless of organizational size or network sophistication. We believe that an open-source security model offers disruptive pricing along with the agility required to quickly address emerging threats.

Subscribe to our Newsletter

Product information, software announcements, and special offers. See our newsletter archive for past announcements.

© Copyright 2002 - 2019 Rubicon Communications, LLC | Privacy Policy