Can't seem to get Squid Cache + ClamAV to work
-
And the complaint is? The non-transparent proxy won't get used fox anything unless you point your clients to it.
-
And the complaint is? The non-transparent proxy won't get used fox anything unless you point your clients to it.
There's no complaint - I'm just trying to get this to work and learn a little on the way!
I'm no IT technician, I'm an Epidemiologist - so please use layman terms.
-
The individual client. Go to your browser setting and set it to use proxy, point it at the pfsense gateway and proxy port , EXAMPLE GATEWAY 192.168.0.1 port 3128
-
I'm no IT technician, I'm an Epidemiologist - so please use layman terms.
Here's some medical documentation on configuring proxies in a browser: http://library.medicine.yale.edu/services/computing/configure-browser
Or you might try some automated infection vectors :P
-
I'm no IT technician, I'm an Epidemiologist - so please use layman terms.
Here's some medical documentation on configuring proxies in a browser: http://library.medicine.yale.edu/services/computing/configure-browser
Or you might try some automated infection vectors :P
The individual client. Go to your browser setting and set it to use proxy, point it at the pfsense gateway and proxy port , EXAMPLE GATEWAY 192.168.0.1 port 3128
Alright guys - I've added the proxy manually.
I'm currently trying to download a 100mb test file:http://ipv4.download.thinkbroadband.com/100MB.zip
I assume I would have to download it once, then should it be cached right ?
However once I try and re download it, I still don't exceed my 50Mbps connection.
I assume when I would download it from the RAM of the PFsense box on gigabit lan, I would get way higher speeds right? -
Seems like it might be working now.
I have download bursts up to 165Mbps which is tripple the speed of my WAN connection. -
Hint: There's the Real Time tab with logs, in case you need more info on what's going on.
-
Please try temporarily removing all other packages other than Squid, squidguard and lightsquid.
Are the Squidm services started?
Does Lightsquid get reports?
Services are all running on my
2.4.2-RELEASE-p1 (amd64)
built on Tue Dec 12 13:45:26 CST 2017
FreeBSD 11.1-RELEASE-p6Created the ClamAV log manually.
Have not tested ClamAV to confirm it is working but the services are running.
-
:) enable transparent proxy settings, check if squid proxy works with this http://amibehindaproxy.com/, then check clamav services with the eicar.org virus test file - if you were able to download the file on your pc without being intercepted by squid+clamav services then clamav doesnt work (use http test file)
Take note I just noticed yesterday that clamav wasnt filtering the eicar virus test file, downloading it flags windows about the virus file.
-
Have you looked at this post:
https://forum.pfsense.org/index.php?topic=117017.0