Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Playing with fq_codel in 2.4

    Traffic Shaping
    123
    1.1k
    1.2m
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T
      tman222 @A Former User
      last edited by

      @muppet said in Playing with fq_codel in 2.4:

      Does anyone know why this might have appeared in my logs?

      fq_codel_enqueue maxidx = 342
fq_codel_enqueue over limit
fq_codel_enqueue maxidx = 342
fq_codel_enqueue over limit
fq_codel_enqueue maxidx = 342
fq_codel_enqueue over limit
fq_codel_enqueue maxidx = 342
fq_codel_enqueue over limit
fq_codel_enqueue maxidx = 342
fq_codel_enqueue over limit
fq_codel_enqueue maxidx = 342
fq_codel_enqueue over limit
fq_codel_enqueue maxidx = 342
fq_codel_enqueue over limit
fq_codel_enqueue maxidx = 342
fq_codel_enqueue over limit
fq_codel_enqueue maxidx = 342
fq_codel_enqueue over limit
fq_codel_enqueue maxidx = 342
fq_codel_enqueue over limit

      In fact it appeared ~450 times:

      [2.4.3-RELEASE][admin@x.x.x]/root: dmesg | grep fq_codel_enqueue | wc -l
 902

      My config is simple:

      [2.4.3-RELEASE][admin@x.x.x]/root: ipfw sched show
00001:  95.000 Mbit/s    0 ms burst 0
q65537  50 sl. 0 flows (1 buckets) sched 1 weight 0 lmax 0 pri 0 droptail
 sched 1 type FQ_CODEL flags 0x0 0 buckets 1 active
 FQ_CODEL target 5ms interval 100ms quantum 1514 limit 10240 flows 1024 ECN
   Children flowsets: 1
BKT Prot ___Source IP/port____ ____Dest. IP/port____ Tot_pkt/bytes Pkt/Byte Drp
  0 ip           0.0.0.0/0             0.0.0.0/0       68    53304  0    0   0
00002:  18.000 Mbit/s    0 ms burst 0
q65538  50 sl. 0 flows (1 buckets) sched 2 weight 0 lmax 0 pri 0 droptail
 sched 2 type FQ_CODEL flags 0x0 0 buckets 1 active
 FQ_CODEL target 5ms interval 100ms quantum 1514 limit 10240 flows 1024 ECN
   Children flowsets: 2
  0 ip           0.0.0.0/0             0.0.0.0/0       61     5849  0    0   0

      At the time the messages appeared, the box was receiving a large (basically 100Mb/s linerate) of UDP traffic (bacula backup running) and I was also doing some testing using iperf.
      The reason I noticed it was becuase a TCP stream I had running at the time was terrible, it dropped to dialup speeds while the bacula traffic was running.

      I have a 100/20 connection, which you can see I have told fq_codel to have 95/18 of to ensure that things work well.

      Does fq_codel struggle with large streams of incoming UDP traffic?
      And does anyone know why I got those messages in my dmesg?

      Thanks! fq_codel has been otherwise amazing.

      What NIC's does your system have and what are their queue sizes set to? Also, are you running any IPS/IDS on your interfaces?

      HTH

      1 Reply Last reply Reply Quote 0
      • ?
        A Former User
        last edited by

        Hi @tman222 thanks for the reply.

        I am running pfSense virtualised on a Proxmox host.
        I am using vtnet as my interfaces, they report themselves as 10Gb interfaces.

        The only plugins I had active at the time were avahci and openvpn-exporter.

        I'm unsure how to answer your question about queue sizes, I have included the output of a couple of commands in the hope they might capture the answer you're after?

        hw.vtnet.rx_process_limit: 512
hw.vtnet.mq_max_pairs: 8
hw.vtnet.mq_disable: 0
hw.vtnet.lro_disable: 0
hw.vtnet.tso_disable: 0
hw.vtnet.csum_disable: 0
dev.vtnet.1.txq0.rescheduled: 0
dev.vtnet.1.txq0.tso: 0
dev.vtnet.1.txq0.csum: 0
dev.vtnet.1.txq0.omcasts: 2765830
dev.vtnet.1.txq0.obytes: 785586398380
dev.vtnet.1.txq0.opackets: 708668034
dev.vtnet.1.rxq0.rescheduled: 0
dev.vtnet.1.rxq0.csum_failed: 0
dev.vtnet.1.rxq0.csum: 198931285
dev.vtnet.1.rxq0.ierrors: 0
dev.vtnet.1.rxq0.iqdrops: 0
dev.vtnet.1.rxq0.ibytes: 116215930004
dev.vtnet.1.rxq0.ipackets: 482511639
dev.vtnet.1.tx_task_rescheduled: 0
dev.vtnet.1.tx_tso_offloaded: 0
dev.vtnet.1.tx_csum_offloaded: 0
dev.vtnet.1.tx_defrag_failed: 0
dev.vtnet.1.tx_defragged: 0
dev.vtnet.1.tx_tso_not_tcp: 0
dev.vtnet.1.tx_tso_bad_ethtype: 0
dev.vtnet.1.tx_csum_bad_ethtype: 0
dev.vtnet.1.rx_task_rescheduled: 0
dev.vtnet.1.rx_csum_offloaded: 0
dev.vtnet.1.rx_csum_failed: 0
dev.vtnet.1.rx_csum_bad_proto: 0
dev.vtnet.1.rx_csum_bad_offset: 0
dev.vtnet.1.rx_csum_bad_ipproto: 0
dev.vtnet.1.rx_csum_bad_ethtype: 0
dev.vtnet.1.rx_mergeable_failed: 0
dev.vtnet.1.rx_enq_replacement_failed: 0
dev.vtnet.1.rx_frame_too_large: 0
dev.vtnet.1.mbuf_alloc_failed: 0
dev.vtnet.1.act_vq_pairs: 1
dev.vtnet.1.requested_vq_pairs: 0
dev.vtnet.1.max_vq_pairs: 1
dev.vtnet.1.%parent: virtio_pci3
dev.vtnet.1.%pnpinfo:
dev.vtnet.1.%location:
dev.vtnet.1.%driver: vtnet
dev.vtnet.1.%desc: VirtIO Networking Adapter


[2.4.3-RELEASE][admin@x.x.x]/root: ifconfig vtnet1
vtnet1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=6c00b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        ether 1a:b3:6c:0f:3c:61
        hwaddr 1a:b3:6c:0f:3c:61
        inet6 fe80::18b3:6cff:fe0f:3c61%vtnet1 prefixlen 64 scopeid 0x2
        inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        media: Ethernet 10Gbase-T <full-duplex>
        status: active
        T 1 Reply Last reply Reply Quote 0
        • mattundM
          mattund
          last edited by mattund

          https://github.com/pfsense/pfsense/pull/3941

          The PR was just merged into HEAD, it hopefully will make into the next release.

          ? dennypageD 2 Replies Last reply Reply Quote 1
          • ?
            A Former User @mattund
            last edited by

            @mattund said in Playing with fq_codel in 2.4:

            https://github.com/pfsense/pfsense/pull/3941

            The PR was just merged into HEAD, it hopefully will make into the next release.

            This is great news! Thanks so much for your hard work here @mattund !

            1 Reply Last reply Reply Quote 2
            • dennypageD
              dennypage @mattund
              last edited by

              @mattund said in Playing with fq_codel in 2.4:

              https://github.com/pfsense/pfsense/pull/3941

              The PR was just merged into HEAD, it hopefully will make into the next release.

              Congratulations Matt. Great contribution!

              1 Reply Last reply Reply Quote 1
              • T
                tman222 @A Former User
                last edited by

                @muppet said in Playing with fq_codel in 2.4:

                Hi @tman222 thanks for the reply.

                I am running pfSense virtualised on a Proxmox host.
                I am using vtnet as my interfaces, they report themselves as 10Gb interfaces.

                The only plugins I had active at the time were avahci and openvpn-exporter.

                I'm unsure how to answer your question about queue sizes, I have included the output of a couple of commands in the hope they might capture the answer you're after?

                hw.vtnet.rx_process_limit: 512
hw.vtnet.mq_max_pairs: 8
hw.vtnet.mq_disable: 0
hw.vtnet.lro_disable: 0
hw.vtnet.tso_disable: 0
hw.vtnet.csum_disable: 0
dev.vtnet.1.txq0.rescheduled: 0
dev.vtnet.1.txq0.tso: 0
dev.vtnet.1.txq0.csum: 0
dev.vtnet.1.txq0.omcasts: 2765830
dev.vtnet.1.txq0.obytes: 785586398380
dev.vtnet.1.txq0.opackets: 708668034
dev.vtnet.1.rxq0.rescheduled: 0
dev.vtnet.1.rxq0.csum_failed: 0
dev.vtnet.1.rxq0.csum: 198931285
dev.vtnet.1.rxq0.ierrors: 0
dev.vtnet.1.rxq0.iqdrops: 0
dev.vtnet.1.rxq0.ibytes: 116215930004
dev.vtnet.1.rxq0.ipackets: 482511639
dev.vtnet.1.tx_task_rescheduled: 0
dev.vtnet.1.tx_tso_offloaded: 0
dev.vtnet.1.tx_csum_offloaded: 0
dev.vtnet.1.tx_defrag_failed: 0
dev.vtnet.1.tx_defragged: 0
dev.vtnet.1.tx_tso_not_tcp: 0
dev.vtnet.1.tx_tso_bad_ethtype: 0
dev.vtnet.1.tx_csum_bad_ethtype: 0
dev.vtnet.1.rx_task_rescheduled: 0
dev.vtnet.1.rx_csum_offloaded: 0
dev.vtnet.1.rx_csum_failed: 0
dev.vtnet.1.rx_csum_bad_proto: 0
dev.vtnet.1.rx_csum_bad_offset: 0
dev.vtnet.1.rx_csum_bad_ipproto: 0
dev.vtnet.1.rx_csum_bad_ethtype: 0
dev.vtnet.1.rx_mergeable_failed: 0
dev.vtnet.1.rx_enq_replacement_failed: 0
dev.vtnet.1.rx_frame_too_large: 0
dev.vtnet.1.mbuf_alloc_failed: 0
dev.vtnet.1.act_vq_pairs: 1
dev.vtnet.1.requested_vq_pairs: 0
dev.vtnet.1.max_vq_pairs: 1
dev.vtnet.1.%parent: virtio_pci3
dev.vtnet.1.%pnpinfo:
dev.vtnet.1.%location:
dev.vtnet.1.%driver: vtnet
dev.vtnet.1.%desc: VirtIO Networking Adapter


[2.4.3-RELEASE][admin@x.x.x]/root: ifconfig vtnet1
vtnet1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=6c00b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        ether 1a:b3:6c:0f:3c:61
        hwaddr 1a:b3:6c:0f:3c:61
        inet6 fe80::18b3:6cff:fe0f:3c61%vtnet1 prefixlen 64 scopeid 0x2
        inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        media: Ethernet 10Gbase-T <full-duplex>
        status: active

                Hi @muppet - do you know if there is an option to change the size of the RX and TX descriptors? You might also try increasing the interface queue length. More details on turning are available on the link below (although this seems to be written mainly for Intel based cards):

                https://calomel.org/freebsd_network_tuning.html

                Also, I'd probably increase the process_limit to 1024 or higher.

                Unfortunately I'm not familiar with vtnet, but I hope this helps.

                1 Reply Last reply Reply Quote 0
                • P
                  pfsvrb
                  last edited by

                  Using newer builds of 2.4.4.a with the FQ_codel GUI options, I'm seeing a strange error when I go to enable a limiter. On an install without any existing limiters or traffic shaping enabled, if I click on Firewall/Traffic Shaper/Limiters, I see an error displayed at the top of the web browser.

                  I am able to create limiters and queues, and assign the queues to rules to enable QoS. FQ_Codel seems to work fine and buffer bloat scores are A+ on speedtest.net. However, when pfSense is rebooted I see errors in the log and the following is displayed when logging in to the router after it has booted up.

                  This seems to be related to the FQ_Codel GUI additions, I was not able to produce this behavior using a 6/30/18 build of pfSense 2.4.4.a. Is anyone else seeing these errors when enabling fq_codel Limiters via the GUI?

                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 121
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 122
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 131
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 132
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 82
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 83
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 95
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 96
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 121
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 122
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 131
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 132
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 121
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 122
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 131
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 132
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 121
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 122
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 131
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 132
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 82
                  [10-Jul-2018 07:18:26 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 83
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 95
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 96
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 121
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 122
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 131
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 132
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 121
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 122
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 131
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 132
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 121
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 122
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 131
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 132
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 82
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 83
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 95
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 96
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 121
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 122
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 131
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 132
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 121
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 122
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 131
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 132
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 82
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 83
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 95
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 96
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 121
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 122
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 131
                  [10-Jul-2018 07:18:27 America/Chicago] PHP Warning: A non-numeric value encountered in /etc/inc/shaper.inc on line 132

                  T w0wW 2 Replies Last reply Reply Quote 0
                  • T
                    TheNarc @pfsvrb
                    last edited by

                    @pfsvrb Can you open that file (Diagnostics > Edit File) and paste a few of the lines being referenced?

                    P 1 Reply Last reply Reply Quote 0
                    • w0wW
                      w0w @pfsvrb
                      last edited by

                      @pfsvrb said in Playing with fq_codel in 2.4:

                      Is anyone else seeing these errors when enabling fq_codel Limiters via the GUI?

                      I don't see any errors.

                      P 1 Reply Last reply Reply Quote 0
                      • P
                        pfsvrb @TheNarc
                        last edited by

                        @thenarc Yes, here are the lines being referenced in the error.

                        Line 121: "target" => array("name" => "Target Delay (ms)", "type" => "number", "default" => get_single_sysctl("net.inet.ip.dummynet.codel.target") / 1000),

                        Line 122: "interval" => array("name" => "Interval (ms)", "type" => "number", "default" => get_single_sysctl("net.inet.ip.dummynet.codel.interval") / 1000),

                        Line 131: "target" => array("name" => "Target Delay (ms)", "type" => "number", "default" => get_single_sysctl("net.inet.ip.dummynet.fqpie.target") / 1000),

                        Line 132: "tupdate" => array("name" => "Interval (ms)", "type" => "number", "default" => get_single_sysctl("net.inet.ip.dummynet.fqpie.tupdate") / 1000),

                        w0wW 1 Reply Last reply Reply Quote 0
                        • P
                          pfsvrb @w0w
                          last edited by

                          @w0w I've tried the following.

                          Delete all the queues and limiters. Check LAN outbound IP4/IP6 rules to verify that there are no references to the deleted QoS queues. Reboot pfSense.

                          Once it boots up, I click on Firewall/Traffic Shaper/Limiters and try to create a new limiter. I see the following error at the top of the browser, this mirrors what I then see in the error log/crash log when I visit the Dashboard in pfSense.

                          0_1531259364913_507ea2ef-43e7-4a0b-91a5-6879eaf98e91-image.png

                          At this point, even if I do not create any new limiters, I still see the following error on the Dashboard:
                          0_1531259442175_90009cf5-f0f9-4625-b071-dc6e83444e2f-image.png

                          This strange behavior doesn't seem to be impacting QoS but, it does seem to be related to the GUI FQ_Codel additions that were completed recently. Prior to that I cannot re-produce this odd error. If I can help post additional screenshots or logs let me know and I'm happy to provide the info.

                          1 Reply Last reply Reply Quote 0
                          • w0wW
                            w0w @pfsvrb
                            last edited by w0w

                            @pfsvrb said in Playing with fq_codel in 2.4:

                            @thenarc Yes, here are the lines being referenced in the error.

                            Line 121: "target" => array("name" => "Target Delay (ms)", "type" => "number", "default" => get_single_sysctl("net.inet.ip.dummynet.codel.target") / 1000),

                            Line 122: "interval" => array("name" => "Interval (ms)", "type" => "number", "default" => get_single_sysctl("net.inet.ip.dummynet.codel.interval") / 1000),

                            Line 131: "target" => array("name" => "Target Delay (ms)", "type" => "number", "default" => get_single_sysctl("net.inet.ip.dummynet.fqpie.target") / 1000),

                            Line 132: "tupdate" => array("name" => "Interval (ms)", "type" => "number", "default" => get_single_sysctl("net.inet.ip.dummynet.fqpie.tupdate") / 1000),

                            I have compared the code and found no difference. But... what version of pfsense exactly do you have?
                            My version:
                            I have 2.4.4-DEVELOPMENT (amd64)
                            built on Sat Jul 07 17:23:30 EDT 2018
                            FreeBSD 11.2-RELEASE

                            BTW I've updated some older version in VM and found that it installed PHP7 version, my real hardware installation shows PHP 5.6.36 (cli) (built: Jul 4 2018 18:59:20) and VM version shows PHP 7.2.7 (cli) (built: Jul 4 2018 19:00:07) ( NTS ), you can also check this with 'php --version' command. This could be related to your error, but currently I can not reproduce it, even on this new PHP7 version. This could be some temporary error also or broken installation. Also there should be some switch to change the PHP version...

                            1 Reply Last reply Reply Quote 0
                            • P
                              pfsvrb
                              last edited by pfsvrb

                              Thank you for checking on this, it is very strange that I am seeing these errors.

                              Here is my current version:
                              2.4.4-DEVELOPMENT (amd64)
                              built on Tue Jul 10 06:09:20 EDT 2018
                              FreeBSD 11.2-RELEASE

                              Here is the output of a "php -i" command on this pfSense install:
                              phpinfo()
                              PHP Version => 7.2.7

                              System => FreeBSD pfSense.pfvm.vbox 11.2-RELEASE FreeBSD 11.2-RELEASE #36 79c8a561b61(RELENG_2_4_4): Tue Jul 10 06:14:32 EDT 2018 root@buildbot3:/builder/ce-master/tmp/obj/builder/ce-master/tmp/FreeBSD-src/sys/pfSense amd64
                              Build Date => Jul 4 2018 18:58:13

                              And, the output of "php --version":
                              PHP 7.2.7 (cli) (built: Jul 4 2018 19:00:07) ( NTS )
                              Copyright (c) 1997-2018 The PHP Group
                              Zend Engine v3.2.0, Copyright (c) 1998-2018 Zend Technologies
                              with Zend OPcache v7.2.7, Copyright (c) 1999-2018, by Zend Technologies

                              A few other items to note, I had installed this from 2.4.4.a built on June 2nd, 2018. I then have done two upgrades, one to a build on June 30th, 2018, and another upgrade yesterday bringing the build up to the current version displayed here.

                              It's also worth noting that I had previously enabled fq_codel using the previous threads listed above and using the ShellCMD function to enable fq_codel schedulers on reboot. I wonder if this somehow conflicted with the install of the newer version that had the GUI fq_codel shaping options? I will try a re-install tonight and do a backup restore and see if I can still duplicate the issue.

                              This is a non-prod box on a VM that I use for testing before I roll out to real hardware. If there's anything else I can do to provide more logs/testing, I'm open to it.

                              w0wW 1 Reply Last reply Reply Quote 0
                              • w0wW
                                w0w @pfsvrb
                                last edited by

                                @pfsvrb said in Playing with fq_codel in 2.4:

                                wonder if this somehow conflicted with the install of the newer version that had the GUI fq_codel shaping options?

                                I think no, but yes it's the best solution to try clean install...

                                P 1 Reply Last reply Reply Quote 0
                                • P
                                  pfsvrb @w0w
                                  last edited by

                                  @w0w I tried a clean install in a new VM. This is using a current build of 2.4.4.a downloaded from pfsense.org today.

                                  Unfortunately, I am seeing identical results. When I go to create a new limiter, it shows the same shaper.inc error.

                                  This is happening on a box stock install without a backup being restored. I've just installed pfSense, logged in, gone through the basic first time setup config wizard, and then clicked on Firewall/Traffic Shaper/Limiters "New Limiter"

                                  0_1531351946964_96d74fce-ed6e-4440-90e3-ab7fe55a1925-image.png

                                  0_1531352011533_d1cb9804-8b81-4a92-a9cf-078fea70fa97-image.png

                                  w0wW 2 Replies Last reply Reply Quote 0
                                  • w0wW
                                    w0w @pfsvrb
                                    last edited by w0w

                                    @pfsvrb
                                    I did the same and no error so far. It's definitely related to VM configuration, I think.

                                    Yep. Reproduced. Sorry used wrong VM at testing 😀
                                    Shame on me!

                                    1 Reply Last reply Reply Quote 0
                                    • w0wW
                                      w0w @pfsvrb
                                      last edited by

                                      @pfsvrb
                                      I think it's time to report it on redmine!

                                      mattundM 1 Reply Last reply Reply Quote 0
                                      • P
                                        pfsvrb
                                        last edited by

                                        Just as a followup, I downloaded the 7/16 2.4.4.a build and tested in my VM today, and this error is gone.

                                        The only oddity I noticed is that the speed limits specified seem to be ignored if in mbit/s. I had to use kbit/s values to get my limits enforced. However, this is a minor issue and it's great to be able to finally set FQ_Codel in the GUI. Great work guys!

                                        1 Reply Last reply Reply Quote 0
                                        • Z
                                          zwck
                                          last edited by

                                          I just updated to the latest beta and i am struggling to understand how to use the GUI. I want to have a very basic setup.

                                          Is this correct?
                                          0_1531843865563_28665435-6e14-44da-915a-9b1d55a42e27-image.png
                                          0_1531843894730_9c5838a1-c854-4bba-980d-2f0720316a25-image.png
                                          0_1531843912112_68ff8a64-439b-497e-8961-8bbae08c6d03-image.png
                                          0_1531843925580_29d38e1e-286d-4f98-b619-21b66cd5776d-image.png

                                          and Lan rule
                                          0_1531843949386_ca829890-4a7e-4233-984b-2d57baa7a985-image.png

                                          P 1 Reply Last reply Reply Quote 0
                                          • P
                                            pfsvrb @zwck
                                            last edited by

                                            @zwck Yes, those settings look fine for a "set it and forget it" fq_codel implementation. How are your bufferbloat scores on dslreports.com/speedtest using the settings in those screenshots??

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post