Playing with fq_codel in 2.4
-
re: "ipfw sched show" command, but I'm not sure how to go about logging that for a 24 hour period.
cron job for (date; ipfw sched show) >> debloat_events
re: additional stats. I usually script those but there is a way to stick additional stats in the default .rc file I think.
--te=cpu_stats=machine,machine --te=qdisc_stats=login@machine,... --te=qdisc_interfaces=etc
re "nearly as nice". One of my fears is of bias without actual testing - "I made this change and the network feels better, ship it!" - where people often overestimate the networks bandwidth, or fiddle with bbr, etc and don't measure. So my other favorite flent feature is you can upload somewhere your .flent.gz files and have an expert take a look (hint hint). Flent by default stores very little metadata about your machine so I'd hoped people would be comfortable sharing its data more widely, unlike, for example packet captures. (note the -x option grabs a lot more).
I am under the impression pacing works universally on modern kernels but have not tested it - particularly not under a vm. That's another fav flent feature, go change out sch_fq for fq_codel and you can easily compare the two plot changes over that single variable.
I love flent. It's the tool that let bufferbloat.net pull so massively ahead of other researchers in the field.
-
It's probable your graph looks like pg 36 'cause that box is on the east coast? we have flent servers all over the world - flent-fremont.bufferbloat.net on the west coast, one in germany, denmark, and london, several on the east coast, one in singapore....
-
@dtaht said in Playing with fq_codel in 2.4:
It's probable your graph looks like pg 36 'cause that box is on the east coast? we have flent servers all over the world - flent-fremont.bufferbloat.net on the west coast, one in germany, denmark, and london, several on the east coast, one in singapore....
Thanks @dtaht - I think that box (netperf.bufferbloat.net) might be located near Atlanta judging by a traceroute to it. Is the list of all Flent servers available publicly somewhere? Or are those testing servers only available to the contributors of the project?
Thanks again.
-
we probably should publish it because it doesn't vary much any more. We used to have 15, now, it's 7? 6? So far we haven't any major scaling issues.
Unlike speedtest.net we don't have a revenue model, and the hope was we'd see folk setting up their own internal servers for testing. It's just netperf and irtt.
-
@dtaht
I really respect the work that was done by you and people fighting bufferbloat over the world.
As for me I use AQM everywhere it possible, to eliminate bufferbloat from my networks. The one problem is still to be investigated is those networks where we can't to detect the bottleneck size aka bandwidth limit varies a lot during day usage. I know there is a lot of such ISP networks in Japan, for example.
Yes we can set bandwidth limit to the minimum one, but it not smart enough, it would be good to detect the current bandwidth automatically and adjust everything. I do know that there are some software and router scripts samples on the net that do it in various ways, but it still need to be studied and developed in many systems, also pfSense. -
@w0w - and you. keep fighting the bloat!
My sadness is that I'd hoped we'd see all the core bufferbloat-fighting tools in DSL/fiber/cablemodems by now. BQL + FQ-codel work well on varying line rates, so long as your underlying driver is "tight". We also showed how to do up wifi right. Also thought we'd see ways (snmp? screen scraping?) of getting more core stats out of more devices, so as to be able to handle sag better.
with sch_cake we made modifying the bandwidth shaping nondestructive and really easy (can pfsense's shaper be changed in place?) - it's essentially
while getlinestatssomehow()
do
tc change dev yourdevice newbandwidth
doneSo far the only deployment of that feature is in the evenroute, but I'm pretty sure at least a few devices can be screenscraped.
As for detecting issues further upstream, there are ways appearing, but they need to be sampling streams to work (see various tools of kathie's: https://github.com/pollere )
-
Hi @dtaht,
I have a basic question regarding bufferbloat that I never quite understood. I can understand how there can be bufferbloat on the uplink of a WAN connection (e.g. 1Gbit LAN interfaces sending into a e.g. 10Mbit cable modem upload). However, what causes bufferbloat on the download since generally the interface the data is being sent into is larger than the download speed on the WAN interface (e.g. a 250Mbit cable modem download speed sent into a 1Gbit LAN interface)?
Thanks in advance for the insight and explanation, I really appreciate it.
-
The buffering in that case builds at the CMTS (on the other side of the cablemodem). CMTS's tend to have outrageous amounts of FIFO buffering (680ms on my 120Mbit comcast connection), so, if you set your inbound shaper to less than their setting, you shift the bottleneck to your device and can control it better. It's not always effective (you can end up in a pathological situation where the CMTS is buffering madly as fast as you are trying to regain control of the link), but setting up an inbound shaper to 85% or so of your provisioned rate generally works, and you end up with zero inbound buffering for sparse packets, and 5-20ms for bigger flows, locally.
Does that work for you? (It's still an open question for me as to how netgate does inbound shaping).
It's horribly compute intensive to do it this way, but since we've been after the cablecos for 7+ years now to fix their CMTSes with no progress, shaping inbound is a necessity. In my networks, I drop 30x more packets inbound than outbound but my links stay usable for tons of users, web PLTs are good, voip and videoconferencing "just work", netflix automagically finds the right rate... etc.
That work for you? The buffering comes from bad shapers on the far side of the link. It's not just CMTSes that are awful. DSL is often horrific. I'm now seeing some 1G GPON networks with several seconds of downlink buffering. I guess they didn't get the memo.
-
I actually kind of wish I hadn't stopped work on "bobbie", a better policer. fq_codel is far too gentle and has the wrong goal for inbound shaping. Yes - it works better than anything we've ever tried, but a better policer would have zero delay for all packets at a similar cost in bandwidth and far less cpu. I think. Haven't got around to it. (basically you substitute achieving a rate in a codel like algorithm instead of a target delay). Tis research for someone else to do, I'm pretty broke after helping get sch_cake out the door.
-
Over here ( https://github.com/dtaht/fq_codel_fast ) I'm trying to speed up fq_codel a bit, and add an integrated multi-cpu inbound shaper.
-
@dtaht - thanks for the response - that makes a lot of sense.
Event though I used a cable modem in the example in my previous post, the question was really about GPON. I suppose what ends up happening is that there are buffers at at the GPON card (hardware) for both upload and download. If there is too much data being pushed into the link from upstream servers (i.e. a bunch of people downloading), the buffers start to fill up and packet delay (bufferbloat) occurs for downstream users. Since GPON bandwidth is generally shared among several users, I suppose the severity can vary depending on the amount of users, their usage patterns, and level of congestion. Furthermore, I suppose it's likely easier to experience bufferbloat on the uplink direction since GPON is asymmetric (2.4Gbit down / 1.2Gbit up).
In my personal experience with a gigabit GPON link I have been fortunate: I can set inbound/outbound shaping at >95% of max bandwidth and still not experience any significant delay/bloat.
-
Yes, the GPON folk did not think hard about buffering, and it won't be much of a problem in their early deployments until they start oversubscribing more links. This is a flaw repeated time after time in this industry - 3g grew to suck, 4g was "better", 5g is going to fix 4g... (and 2g, 'cause so many have exited the band now, can be surprisingly good nowadays).
Recently I gave a presentation to broadcom ( http://flent-fremont.bufferbloat.net/~d/broadcom_aug9.pdf ) Another one of my hopes in the bufferbloat project was that someone would solve the over-subscription problem up front for a change - and I thought we'd have a chance with GPON and gfiber, but the team I was on got dissolved about 9 months from being able to deploy.
Sigh:
http://www.dslreports.com/speedtest/results/isp/r3910-google-fiber
-
I'm going to have some serious issues attempting to measure the reduction of bufferbloat from fq_Codel
This is with shaping disabled. Dear lord, what is my ISP doing? I love fiddling and they're taking that away from me. I just realized I forgot to disable BitTorrent. Explains my low upload speed.
-
I just updated from 2.4.3 to the 2.4.4 release candidate and am keen to try out fq_codel. I haven't read all 434 (!) posts of this thread, but can anyone kindly point me to a basic beginner's guide or instructions to setting it up for a simple home connection?
-
@occamsrazor Jimp did a quick bit on codel during the last Hangout, with a config example.
https://www.youtube.com/watch?v=o8nL81DzTlU&t=380
-
@kom said in Playing with fq_codel in 2.4:
@occamsrazor Jimp did a quick bit on codel during the last Hangout, with a config example.
https://www.youtube.com/watch?v=o8nL81DzTlU&t=380
Thanks. That's a nice and easy guide. I followed all the steps but wondering if I've done something wrong as the results are inferior to without. I'm on a 50MB dsl connection and before this got this result:
<a href="http://www.dslreports.com/speedtest/39052963"><img src="http://www.dslreports.com/speedtest/39052963.png"></a>
I had an A and A+ score so maybe the traffic shaper is not even needed. After enabling the shaper as per the video with WANDown bandwidth set to 50MB and WanUp set to 40MB, I get this:
<a href="http://www.dslreports.com/speedtest/39053743"><img src="http://www.dslreports.com/speedtest/39053743.png"></a>
My bufferbloat score is way worse as is my bandwidth. One thing I notice, when I go to PFSense > Status > Queues it says "Traffic shaping is not configured." - is that normal for this traffic shaping method?
-
go to command prompt and type "ipfw sched show" and print the output please
typo :( sorry
-
@zwck said in Playing with fq_codel in 2.4:
ipfw shed show
Thanks, output is:
ipfw: bad command `shed'I set up the two limiters as in the video:
And the rule in the Firewall Floating tab:
Is there supposed to be something showing in the queues tab?
-
ipfw sched show -
@gertjan said in Playing with fq_codel in 2.4:
ipfw sched showThanks, output is:
00001: 50.000 Mbit/s 0 ms burst 0 q65537 50 sl. 0 flows (1 buckets) sched 1 weight 0 lmax 0 pri 0 droptail sched 1 type FQ_CODEL flags 0x0 0 buckets 1 active FQ_CODEL target 5ms interval 100ms quantum 1514 limit 10240 flows 1024 ECN Children flowsets: 1 BKT Prot ___Source IP/port____ ____Dest. IP/port____ Tot_pkt/bytes Pkt/Byte Drp 0 ip 0.0.0.0/0 0.0.0.0/0 2 738 0 0 0 00002: 40.000 Mbit/s 0 ms burst 0 q65538 50 sl. 0 flows (1 buckets) sched 2 weight 0 lmax 0 pri 0 droptail sched 2 type FQ_CODEL flags 0x0 0 buckets 0 active FQ_CODEL target 5ms interval 100ms quantum 1514 limit 10240 flows 1024 ECN Children flowsets: 2
