Playing with fq_codel in 2.4
-
Can you use the fq_codel in/out limiters in conjunction with the standard traffic shaping?
-
You could, but not on the same interface. WAN with shaper and LAN with limiter would work I think for example.
-
I'm using shapers with the limiters on LAN. Before fqcodel, I was using plain limiters to keep guests on Wi-Fi from hogging connection with their apple updates.
With fq codel, i kept the same limiter speeds just changed the scheduler. I also added a fq codel limiter for those that aren't throttled and excluded the cable boxes as they aren't included in the isp speed limit (fios)
Unfortunately, I cannot use a single fq codel for everyone this way, but it doesn't seem to affect buffer bloat.
Limiters I have:
Schedulers: 00001: 27.000 Mbit/s 0 ms burst 0 q65537 50 sl. 0 flows (1 buckets) sched 1 weight 0 lmax 0 pri 0 droptail sched 1 type FQ_CODEL flags 0x0 0 buckets 0 active FQ_CODEL target 5ms interval 80ms quantum 300 limit 10240 flows 1024 NoECN Children flowsets: 1 00002: 28.000 Mbit/s 0 ms burst 0 q65538 50 sl. 0 flows (1 buckets) sched 2 weight 0 lmax 0 pri 0 droptail sched 2 type FQ_CODEL flags 0x0 0 buckets 0 active FQ_CODEL target 5ms interval 80ms quantum 300 limit 10240 flows 1024 NoECN Children flowsets: 2 00004: 30.000 Mbit/s 0 ms burst 0 q65540 50 sl. 0 flows (1 buckets) sched 4 weight 0 lmax 0 pri 0 droptail sched 4 type FQ_CODEL flags 0x0 0 buckets 0 active FQ_CODEL target 5ms interval 80ms quantum 300 limit 10240 flows 1024 NoECN Children flowsets: 4 00005: 47.000 Mbit/s 0 ms burst 0 q65541 50 sl. 0 flows (1 buckets) sched 5 weight 0 lmax 0 pri 0 droptail sched 5 type FQ_CODEL flags 0x0 0 buckets 0 active FQ_CODEL target 5ms interval 80ms quantum 300 limit 10240 flows 1024 NoECN Children flowsets: 5 00006: 48.000 Mbit/s 0 ms burst 0 q65542 50 sl. 0 flows (1 buckets) sched 6 weight 0 lmax 0 pri 0 droptail sched 6 type FQ_CODEL flags 0x0 0 buckets 0 active FQ_CODEL target 5ms interval 80ms quantum 300 limit 10240 flows 1024 NoECN Children flowsets: 6 00007: 29.000 Mbit/s 0 ms burst 0 q65543 50 sl. 0 flows (1 buckets) sched 7 weight 0 lmax 0 pri 0 droptail sched 7 type FQ_CODEL flags 0x0 0 buckets 0 active FQ_CODEL target 5ms interval 80ms quantum 300 limit 10240 flows 1024 NoECN Children flowsets: 3 Queues: q00001 50 sl. 0 flows (1 buckets) sched 1 weight 0 lmax 0 pri 0 droptail q00002 50 sl. 0 flows (1 buckets) sched 2 weight 0 lmax 0 pri 0 droptail q00003 50 sl. 0 flows (1 buckets) sched 7 weight 0 lmax 0 pri 0 droptail q00004 50 sl. 0 flows (1 buckets) sched 4 weight 0 lmax 0 pri 0 droptail q00005 50 sl. 0 flows (1 buckets) sched 5 weight 0 lmax 0 pri 0 droptail q00006 50 sl. 0 flows (1 buckets) sched 6 weight 0 lmax 0 pri 0 droptailHSFC traffic shaping limiters
QUEUE BW SCH PRI PKTS BYTES DROP_P DROP_B QLEN BORRO SUSPE P/S B/S root_em0 64M hfsc 0 0 0 0 0 0 0 0 qInternetOUT 48M hfsc 0 0 0 0 0 0 0 qACK 8640K hfsc 12043K 703M 0 0 0 3 215 qP2P 960K hfsc 42429K 45636M 0 0 0 64 83005 qVoIP 512K hfsc 0 0 0 0 0 0 0 qGames 9600K hfsc 3576K 592M 0 0 0 0 0 qOthersHigh 9600K hfsc 2463K 665M 0 0 0 4 811 qOthersLow 2400K hfsc 0 0 0 0 0 0 0 qDefault 7200K hfsc 1815K 1170M 0 0 0 8 975 qNoLimiterSTB 4000K hfsc 0 0 0 0 0 0 0 qLink 640K hfsc 0 0 0 0 0 0 0 root_em1 490M hfsc 0 0 0 0 0 0 0 0 qLink 98M hfsc 0 0 0 0 0 0 0 qInternetIN 47M hfsc 0 0 0 0 0 0 0 qACK 8460K hfsc 838180 106M 0 0 0 6 374 qP2P 940K hfsc 27924K 14986M 0 0 0 24 2656 qVoIP 512K hfsc 0 0 0 0 0 0 0 qGames 9400K hfsc 1334 581495 0 0 0 0 0 qOthersHigh 9400K hfsc 8497K 5911M 0 0 0 4 618 qOthersLow 2350K hfsc 5315K 7804M 0 0 0 0 0 qDefault 7050K hfsc 18785K 17996M 0 0 0 32 6931 qNoLimiterSTB 320M hfsc 55549 78583K 0 0 0 0 0 -
@uptownvagrant Thanks for the guide, it is working perfectly for me on my Cable WAN (very bad bufferbloat). I'm trying to use it for my VDSL WAN as well but running into an odd issue. if I have the out floating rule enabled then my upload speed is exceptionally slow, no matter how the limiter is configured. If I disable the out floating rule and leave only the in one then upload speed is fine (but bufferbloat is back). The in rule works fine and gets rid of the download bufferbloat.
http://www.dslreports.com/speedtest/45277068 - this shows it with the out floating rule enabled
http://www.dslreports.com/speedtest/45277501 - and this is it with it disabled
Any ideas?
TIA
-
@csutcliff Hmm, let's start with this. Can you post the following output from the configuration that's not working with the VDSL circuit?
- Diagnostics / Limiter Info
- Diagnostics / Edit file - /tmp/rules.limiter
- Add something unique to the description of your floating rules, like the word "FQ-CoDel", and then go to Diagnostics / Command Prompt and execute
pfctl -vvsr | grep "FQ-CoDel"You should get something like the following:
@59(1545172581) match in on igb0 inet all label "USER_RULE: FQ-CoDel WAN-IN" dnqueue(1, 2) @60(1545172613) match out on igb0 inet all label "USER_RULE: FQ-CoDel WAN-OUT" dnqueue(2, 1) -
Is this normal? our dnqueue is opposite, I follow your guide.
@109(1546845642) match in on re0 inet all label "USER_RULE: ETPI-In FQ-CoDel queue" dnqueue(2, 1) @110(1546845723) match out on re0 inet all label "USER_RULE: ETPI-Out FQ-CoDel queue" dnqueue(1, 2)Also hope you can help me with my problem, Implementing your configuration on Dual-WAN (Load Balance ) setup on pfSense.
-
Thanks for the reply, here is my limiter info. The 382.375/20.910 Mbit/s ones are my cable WAN, the 62.000/17.500Mbit/s is for my VDSL. First two queues are cable, last two are VDSL.
Limiters: 00001: 382.375 Mbit/s 0 ms burst 0 q131073 50 sl. 0 flows (1 buckets) sched 65537 weight 0 lmax 0 pri 0 droptail sched 65537 type FIFO flags 0x0 0 buckets 0 active 00002: 20.910 Mbit/s 0 ms burst 0 q131074 50 sl. 0 flows (1 buckets) sched 65538 weight 0 lmax 0 pri 0 droptail sched 65538 type FIFO flags 0x0 0 buckets 0 active 00003: 62.000 Mbit/s 0 ms burst 0 q131075 50 sl. 0 flows (1 buckets) sched 65539 weight 0 lmax 0 pri 0 droptail sched 65539 type FIFO flags 0x0 0 buckets 0 active 00004: 17.500 Mbit/s 0 ms burst 0 q131076 50 sl. 0 flows (1 buckets) sched 65540 weight 0 lmax 0 pri 0 droptail sched 65540 type FIFO flags 0x0 0 buckets 0 active Schedulers: 00001: 382.375 Mbit/s 0 ms burst 0 q65537 50 sl. 0 flows (1 buckets) sched 1 weight 0 lmax 0 pri 0 droptail sched 1 type FQ_CODEL flags 0x0 0 buckets 1 active FQ_CODEL target 5ms interval 100ms quantum 300 limit 10240 flows 20480 ECN Children flowsets: 1 BKT Prot ___Source IP/port____ ____Dest. IP/port____ Tot_pkt/bytes Pkt/Byte Drp 0 ip 0.0.0.0/0 0.0.0.0/0 7 470 0 0 0 00002: 20.910 Mbit/s 0 ms burst 0 q65538 50 sl. 0 flows (1 buckets) sched 2 weight 0 lmax 0 pri 0 droptail sched 2 type FQ_CODEL flags 0x0 0 buckets 1 active FQ_CODEL target 5ms interval 100ms quantum 300 limit 10240 flows 20480 ECN Children flowsets: 2 0 ip 0.0.0.0/0 0.0.0.0/0 4 218 0 0 0 00003: 62.000 Mbit/s 0 ms burst 0 q65539 50 sl. 0 flows (1 buckets) sched 3 weight 0 lmax 0 pri 0 droptail sched 3 type FQ_CODEL flags 0x0 0 buckets 0 active FQ_CODEL target 5ms interval 100ms quantum 300 limit 10240 flows 20480 ECN Children flowsets: 3 00004: 17.500 Mbit/s 0 ms burst 0 q00004 50 sl. 0 flows (1 buckets) sched 4 weight 1 lmax 0 pri 0 droptail sched 4 type FQ_CODEL flags 0x0 0 buckets 0 active FQ_CODEL target 5ms interval 100ms quantum 300 limit 10240 flows 20480 ECN Children flowsets: 4 Queues: q00001 50 sl. 0 flows (1 buckets) sched 1 weight 0 lmax 0 pri 0 droptail q00002 50 sl. 0 flows (1 buckets) sched 2 weight 0 lmax 0 pri 0 droptail q00003 50 sl. 0 flows (1 buckets) sched 3 weight 0 lmax 0 pri 0 droptail q00004 50 sl. 0 flows (1 buckets) sched 4 weight 1 lmax 0 pri 0 droptail/tmp/rules.limiter
pipe 1 config bw 382375000b droptail sched 1 config pipe 1 type fq_codel target 5ms interval 100ms quantum 300 limit 10240 flows 20480 ecn queue 1 config pipe 1 droptail pipe 2 config bw 20909500b droptail sched 2 config pipe 2 type fq_codel target 5ms interval 100ms quantum 300 limit 10240 flows 20480 ecn queue 2 config pipe 2 droptail pipe 3 config bw 62000Kb droptail sched 3 config pipe 3 type fq_codel target 5ms interval 100ms quantum 300 limit 10240 flows 20480 ecn queue 3 config pipe 3 droptail pipe 4 config bw 17500Kb droptail sched 4 config pipe 4 type fq_codel target 5ms interval 100ms quantum 300 limit 10240 flows 20480 ecn queue 4 config pipe 4 droptailpfctl -vvsr | grep "FQ-CoDel"
@66(1548714795) match in on igb0 inet all label "USER_RULE: VIRGIN_WAN_DL FQ-CoDel queue" dnqueue(1, 2) @67(1548714885) match out on igb0 inet all label "USER_RULE: VIRGIN_WAN_UL FQ-CoDel queue" dnqueue(2, 1) @71(1548715528) match in on pppoe0 inet all label "USER_RULE: AAISP_WAN_DL FQ-CoDel queue" dnqueue(3, 4) @72(1548722103) match out on pppoe0 inet all label "USER_RULE: AAISP_WAN_UL FQ-CoDel queue" dnqueue(4, 3) -
@csutcliff Hmm, I don't have a VDSL2 PPPoE connection to test with but I'm wondering if the following thread may point you down the correct path.
https://lists.freebsd.org/pipermail/freebsd-ipfw/2016-April/006161.html
Also, why do you have your VDSL limiters set above what you are seeing in the speed test results when you don't have them enabled? Can you try setting both limiters to 80% or 85% of your speed test result and then work up from there - keeping an eye on buffering each subsequent test?
-
@chrcoluk just a quick note after some additional testing. I believe I ran into what you were seeing when the number of active states passing through the limiter queues far exceeded the FQ-CoDel flows value and flows were not being separated any longer. Increasing the FQ-CoDel flows value allowed flow separation to be maintained and interactive flow packets were not being sent to sub-queues where non interactive flow packets were also being sent.
-
@uptownvagrant I'll have a read, thanks.
Regarding the limiters settings, I obviously haven't been able to tune the upstream setting yet (I've got it at just under 95% of the sync speed) but I have tried it set at only 10Mbit/s and it makes no difference.
For the dowstream, my sync is over 65Mbit/s and I've settled on 62Mbit/s after trial an error to see what value eliminated bufferbloat whilst keeping as much bandwidth available as possible. The reason you don't see 65+ on the speed test without the limiters is because my ISP allows me to set the sending rate on the download which I have set to 95% of sync, this is meant to help with bufferbloat and improve VOIP etc because the link is never 100% pegged and in theory stops the wholesale ISP (their supplier) buffers getting involved.
Edit: had a read of the thread you linked. I don't think any of that applies here as I'm using plain PPPoE not PPPoA, I have a full 1500 MTU to the internet thanks to baby jumbo frames (1508 to the modem to account for the PPPoE header) and my upload speed is not restrictive like in the example, in fact it's only a couple of Mbit/s shy of the cable connection that works fine.
-
@csutcliff If you set quantum to 1508 and enable the limiter what is the result? Also, does FQ-CoDel perform as expected over the VDSL2 circuit without dual WAN in the mix?
-
@uptownvagrant no change in behaviour with 1508 quantum. I'll test just the VDSL limiters enabled later this evening.
-
Limit could be lowered to help out:
https://www.bufferbloat.net/projects/codel/wiki/Best_practices_for_benchmarking_Codel_and_FQ_Codel/#tuning-fq-codelWhen running it at 1GigE and lower, today it helps to change a few parameters given limitations in today’s Linux implementation and underlying device drivers. The default packet limit of 10000 packets is crazy in any other scenario. It is sane to reduce this to a 1000, or less, on anything running at gigE or below. The over-large packet limit leads to bad results during slow start on some benchmarks. Note that, unlike txqueuelen, CoDel derived algorithms can and DO take advantage of larger queues, so reducing it to, say, 100, impacts new flow start, and a variety of other things. We tend to use ranges of 800-1200 in our testing, and at 10Mbit, currently 600. -
@uptownvagrant Sorry for the delay, just got a chance to test it without the dual wan. No change in the result.
-
@robnitro Thanks for the suggestion, It has seemingly improved my cable connection responsiveness slightly but doesn't make a difference to the upload problem on vdsl.
-
I wanted to give a brief update - I actually am here about the issues with traceroutes showing the default destination addresses for every hop, caused by the Floating Firewall rule.
I fixed this on my side, initially, by only having the rule shape TCP/UDP - but some other clients do traceroute via UDP so I had this same issue. Instead, there's a firewall option to limit/scope it down to particular TCP flags - you can set the ones you wish, but I ultimately ended up targeting it to "Any" protocol, and "Any flags" - this fixed it for me. :)
EDIT: My pfSense randomly crashed... and... it rebooted... and... somehow now it isn't working.
Sigh. Guess I'm back to applying this to a non-floating rule. :( -
Hi, what rule did you use for non floating?
When I do tracert from windows, it shows only 2 hops. Router and then the destination.From openwrt dumb access point, all hops show fine like From the router I get all of the hops. Floating rule instant match allow any IPV4 ICMP trace - and another rule icmp any at top of list. So that means it should skip using the codel limiters right? I just dont understand why my desktop client gets bad tracert info?
-
i actually just reverted to using a simple TCP/UDP floating rule, setting up the non-floating was a huge pain (I had it working before) but can't remember how.
I'm going to be creating exemptions / rules that exempt specific clients in the future - now that it's working fine (on my primary use case, Windows!)
Here is the exact rule I have (that is, somehow, letting pfSense UDP traceroute work - I am tired of messing with it / don't care). Anything that is missing means it's default.
Action: Pass
Interface: WAN
Direction: Out
Addr Family: IPv4
Protocol: TCP/UDP
Gateway: WAN_DHCP (my gateway selected)
In/Out Pipe: WANUpQ (my name) & WANDownQ (my name)Here are the rules I have:
Firewall Rules > Traffic Shaper > "Limiters""CODEL_QMDown"
Limiter: Enabled
Bandwidth: 320 Mbit
Queue Management Algorithm: CoDel
Scheduler: FQ_CODELSubqueue, "WANDownQ"
Queue algorithm: CoDel"CODEL_QMUp"
Limiter: Enabled
Bandwidth: 340Mbit (yes, I have higher upload than download)
Queue management algorithm: CoDel
Scheduler: FQ_CODELSubqueue, "WANUpQ"
Queue algorithm: CoDel
I know these are basically defaults - I'm not sure why these work? I simply re-created everything, and now everything works great... it's quite odd. I'm curious if there is an issue with pfSense and having the rules edited, or large changes made to the queues (I hit Save/Apply, particularly, after every single change / creation - no going back and editing for me!)
Quite odd. I've used FQ_CoDel in other devices/implementations and have never run into these nuances. It's working great, now, though - but the traceroute/etc was bothering me horribly. With these rules (no floating rule for 'any') it seems to be working great... for... whatever reason.
-
Hi all!
Configured limiters and now my traceroute always shows resolved IP address instead of actual hops.
I`ve read here this is common but just to be sure, is this supposed to be like this or is it a bug?Thanks!
-
Hi guys,
I’m also having an issue with my upload speed... So I have a 400Mbit down / 40 Mbit up connection, and I've followed the guide here to enable the limiters, filling in the 400 and 40 as my down and up speeds.
However when I do speedtests, while my bufferbloat is now gone... I no can no longer reach my maximum speeds.
Down I may get around 360Mbit max which I can live with butup is just pathetic, maybe between 2-8Mbit at most....Is this known? Anything I can do to improve this? I played with the Queue Length value which helped a bit, but in the end didn't really have too much of an impact....
Limiters: 00001: 400.000 Mbit/s 0 ms burst 0 q131073 10000 sl. 0 flows (1 buckets) sched 65537 weight 0 lmax 0 pri 0 AQM CoDel target 5ms interval 100ms ECN sched 65537 type FIFO flags 0x0 0 buckets 0 active 00002: 40.000 Mbit/s 0 ms burst 0 q131074 1000 sl. 0 flows (1 buckets) sched 65538 weight 0 lmax 0 pri 0 AQM CoDel target 5ms interval 100ms ECN sched 65538 type FIFO flags 0x0 0 buckets 0 active Schedulers: 00001: 400.000 Mbit/s 0 ms burst 0 q65537 50 sl. 0 flows (1 buckets) sched 1 weight 0 lmax 0 pri 0 droptail sched 1 type FQ_CODEL flags 0x0 0 buckets 0 active FQ_CODEL target 5ms interval 100ms quantum 1514 limit 10240 flows 1024 ECN Children flowsets: 1 00002: 40.000 Mbit/s 0 ms burst 0 q65538 50 sl. 0 flows (1 buckets) sched 2 weight 0 lmax 0 pri 0 droptail sched 2 type FQ_CODEL flags 0x0 0 buckets 0 active FQ_CODEL target 5ms interval 100ms quantum 1514 limit 10240 flows 1024 ECN Children flowsets: 2 Queues: q00001 50 sl. 0 flows (1 buckets) sched 1 weight 0 lmax 0 pri 0 AQM CoDel target 5ms interval 100ms ECN q00002 50 sl. 0 flows (1 buckets) sched 2 weight 0 lmax 0 pri 0 AQM CoDel target 5ms interval 100ms ECNDisabled:
Enabled:
