GUI upgrade 2.3.3 to 2.3.3_1 fails… Lost LAN and WAN
-
Hi - I see a bunch of topics that start off similarly to my attempted upgrade via the GUI, but then mine gets a bit worse… The upgrade says it failed, but I left it alone for a while to see what would happen, hoping it would just reboot or whatever and be usable again. After 20 minutes it had not happened, and I had no connectivity, so I power cycled it. Still no connectivity.
I can't access the GUI or SSH in from the LAN, and while I do leave one path in from the WAN, I can not see this now, either. I am hoping I can hook up a monitor and keyboard and try getting it restored that way, but will have to get back to that after work... I do have some recent backups that I hope I can use from the console.
Was hoping to get some advice from anyone who had seen something like this before... Thanks!
Its an ATOM D2550, 4GB DDR3, 32GB SSD, Integrated dual-NIC, and the system has been running fine for a few years without issue.
-
Without knowing what it's saying on the console, it's impossible to speculate. 2.3.3 to 2.3.3-p1 is a very, very small update. It is highly unlikely it would be the cause of a connectivity problem.
