SOLVED_IPSEC with_EAP-MSCHAPv2, connected from Windows 10 but No Traffic at all

Dawara

Hello to everyone,
This is my first post here, so , sorry if I miss something or if Im not clear enough

I've been using PFSense for 2 or 3 years…

In previous versions I was following this Guide to Configure IPSEC
https://doc.pfsense.org/index.php/IKEv2_with_EAP-MSCHAPv2

In previous versions everything works fine and traffic flows with no problems.

After 2.3 upgrades… Client connects but , there is no way to ping to LAN servers from the client computer...

I was trying all kind of modifications in configuration... with no success...

I already create the Firewall RULES on IPSEC Tab with ,,, ...

There is something else Im missing ?? You can follow all the process i made I the link I posted..

Thanks for reading in advance...

(

Dawara

I Solved looking at and playing with this things :

IN IPSEC - MOBILE CLIENT TAB ->Network configuration for Virtual Address Pool , using a totally diferent subnet ….
For example, if your LAN subnet is 192.168.0.X then use 10.1.1.0 or wharever...
IN Windows 10… set "Use default gateway on remote NETWORK"
look at this on network connections... Properties ... ip v4 tcp/ip properties... advanced... IP Settings Tab

Hope this helps….

I spend a lot of time with this...

Best Regards...