Unofficial E2guardian package for pfSense

marcelloc

Create the rule and try to fetch the wpad file. If it fetches, the is no conflict.

pfsensation

@marcelloc:

Create the rule and try to fetch the wpad file. If it fetches, the is no conflict.

Able to fetch it no problems, as long as I type http, since web config is on https.

pfsensation

@marcelloc:

Create a file on filesystem with the script and then call the file on cron.

Didn't work at first, but added "Done" at the end of the script. Now it seems to be working fine.

marcelloc

@pfsensation:

@marcelloc:

Create a file on filesystem with the script and then call the file on cron.

Didn't work at first, but added "Done" at the end of the script. Now it seems to be working fine.

Bad copy and paste. Sorry. I've fixed the post

marcelloc

Can you test if a full MITM e2guardian setup with no exceptions crashes? current binaries from package are not on the latest version but it's close to it. If you can confirm a crash, I'LL build with current latest code.

marcelloc

I found an workaround util 4.1.1 gets fixed 8)

Configure squid to intercept SSL connections with splice all mode (this checks only remote certificate)
Configure e2guardian Parent proxy Settings with your squid ssl interface configured.

Testing with steps I know that crashes the daemon but it's still alive with and without MITM.

pfsensation

@marcelloc:

I found an workaround util 4.1.1 gets fixed 8)

Configure squid to intercept SSL connections with splice all mode (this checks only remote certificate)

Configure e2guardian Parent proxy Settings with your squid ssl interface configured.

Testing with steps I know that crashes the daemon but it's still alive with and without MITM.

Won't squid and E2Guardian conflict with each other if I configure squid to intercept traffic? Since it creates a NAT rule and I already have a NAT rule for port 80 > 8080 for E2guardian.
Remember squid is completely unrestricted in terms of allowing Web access without E2 Guardian. I also realised you updated the package, what's new in the newer version?

Got the error below on the latest version available in the repo.

PHP ERROR: Type: 1, File: /etc/inc/util.inc, Line: 1731, Message: Allowed memory size of 262144000 bytes exhausted (tried to allocate 47625514 bytes)	@ 2017-06-11 11:16:25

Then got this crash report…

					Crash report begins.  Anonymous machine information:

amd64
10.3-RELEASE-p19
FreeBSD 10.3-RELEASE-p19 #0 bbfdb9a1d(RELENG_2_3_4): Wed May  3 16:09:14 CDT 2017     root@ce23-amd64-builder:/builder/pfsense-234/tmp/obj/builder/pfsense-234/tmp/FreeBSD-src/sys/pfSense

Crash report details:

PHP Errors:
[11-Jun-2017 11:16:25 Europe/London] PHP Fatal error:  Allowed memory size of 262144000 bytes exhausted (tried to allocate 47625514 bytes) in /etc/inc/util.inc on line 1731
[11-Jun-2017 11:16:25 Europe/London] PHP Stack trace:
[11-Jun-2017 11:16:25 Europe/London] PHP   1\. {main}() /usr/local/www/pkg_edit.php:0
[11-Jun-2017 11:16:25 Europe/London] PHP   2\. eval() /usr/local/www/pkg_edit.php:141
[11-Jun-2017 11:16:25 Europe/London] PHP   3\. e2guardian_check_config() /usr/local/www/pkg_edit.php(141) : eval()'d code:1
[11-Jun-2017 11:16:25 Europe/London] PHP   4\. e2guardian_start() /usr/local/pkg/e2guardian.inc:1309
[11-Jun-2017 11:16:25 Europe/London] PHP   5\. mwexec() /usr/local/pkg/e2guardian.inc:1357
[11-Jun-2017 11:16:25 Europe/London] PHP   6\. sprintf() /etc/inc/util.inc:1731

No FreeBSD crash data found.

marcelloc

Did you tried the debug version package I've posted before?

There is a new config option (banner site with bypass key) on new binaries, you need to save config and apply in order to get correct config files.

pfsensation

@marcelloc:

Did you tried the debug version package I've posted before?

There is a new config option (banner site with bypass key) on new binaries, you need to save config and apply in order to get correct config files.

I updated via the console, and it might have automatically gone to the debug version. Where is that option? :o

marcelloc

No, debug version needs a manual intervention.
To be sure you're not on a debug version, just try to run run /usr/local/sbin/e2guardian on console

pfsensation

@marcelloc:

No, debug version needs a manual intervention.
To be sure you're not on a debug version, just try to run run /usr/local/sbin/e2guardian on console

When I run the command I am getting an output. Does that mean I'm on the debug version? I'm confused.

marcelloc

@pfsensation:

When I run the command I am getting an output. Does that mean I'm on the debug version? I'm confused.

big output with a lot of information means debug mode, if it backs to console then you're on normal version.

marcelloc

Try to delete the crash alert and see if it happens again. I have no alerts or crashes on gui here.

pfsensation

@marcelloc:

@pfsensation:

When I run the command I am getting an output. Does that mean I'm on the debug version? I'm confused.

big output with a lot of information means debug mode, if it backs to console then you're on normal version.

Yep I am getting a lot of information. I ended up on the debug version just by updating through the console, how do I return back to normal version? Or do you recommend I stay on the debug version for now.

marcelloc

Uninstall then Install the package using the gui. And see if it will install the debug version.

pfsensation

@marcelloc:

Uninstall then Install the package using the gui. And see if it will install the debug version.

Yep, after re-installation running "/usr/local/sbin/e2guardian" again I'm still getting back a lot of information.

EDIT: got the error again

PHP ERROR: Type: 1, File: /etc/inc/util.inc, Line: 1729, Message: Allowed memory size of 262144000 bytes exhausted (tried to allocate 72 bytes)	@ 2017-06-11 14:33:38

					Crash report begins.  Anonymous machine information:

amd64
10.3-RELEASE-p19
FreeBSD 10.3-RELEASE-p19 #0 bbfdb9a1d(RELENG_2_3_4): Wed May  3 16:09:14 CDT 2017     root@ce23-amd64-builder:/builder/pfsense-234/tmp/obj/builder/pfsense-234/tmp/FreeBSD-src/sys/pfSense

Crash report details:

PHP Errors:
[11-Jun-2017 14:33:38 Europe/London] PHP Fatal error:  Allowed memory size of 262144000 bytes exhausted (tried to allocate 72 bytes) in /etc/inc/util.inc on line 1729
[11-Jun-2017 14:33:38 Europe/London] PHP Stack trace:
[11-Jun-2017 14:33:38 Europe/London] PHP   1\. {main}() /usr/local/www/pkg_edit.php:0
[11-Jun-2017 14:33:38 Europe/London] PHP   2\. eval() /usr/local/www/pkg_edit.php:141
[11-Jun-2017 14:33:38 Europe/London] PHP   3\. e2guardian_check_config() /usr/local/www/pkg_edit.php(141) : eval()'d code:1
[11-Jun-2017 14:33:38 Europe/London] PHP   4\. e2guardian_start() /usr/local/pkg/e2guardian.inc:1309
[11-Jun-2017 14:33:38 Europe/London] PHP   5\. mwexec() /usr/local/pkg/e2guardian.inc:1357
[11-Jun-2017 14:33:38 Europe/London] PHP   6\. exec() /etc/inc/util.inc:1729

marcelloc

I'll remove the debug version from repo. Are you on 2.3 amd64?

EDIT

done. No debug version on repo. An uninstall and reinstall should fix.

marcelloc

After 12hs, still no crashes. This week I'll push more clients to e2g and see how it goes.

good memory usage and performance. results from top -n -o res

e2g_top.PNG_thumb

Mr. Jingles

@Mr.:

@marcelloc:

To remove tinyproxy, install it from Unofficial repo and then uninstall. The same with e2guardian.

The c-icap is a package from squid

Sorry to ask, Marcello, but how do install from unofficial repo? pkg install and then…?

Pfsensation above this reply says uninstalling isn't going to work(?)

marcelloc

@Mr.:

Sorry to ask, Marcello, but how do install from unofficial repo? pkg install and then…?

Just enabled the Unofficial repo following instructions from the first post and then go to GUI under system -> package manager