Simple Virtual IP, Proxy-ARP, need only ICMP Ping, doesn't work ?

[hkusulja]

Hi!

pfsense 1.2

I have LAN interface with firewall rule…, any any..... allow...

LAN interface is:
192.168.0.1 / 24

I have created Firewall > Virtual IPs
Proxy ARP - Single address 192.168.0.2

all hosts are 192.168.0.10 - 192.168.0.20

when i ping from host 192.168.0.10 > 192.168.0.2
there is no answer

arp table is correct
(both 192.168.0.1 and 192.168.0.2, has same MAC addresses)..

how can i get to pfsense over 192.168.0.2 ?

(don't ask why.. :) )

thanks

[dotdash]

You can't ping a proxy-arp VIP. It should work just fine though. If you need to ping it, use a CARP VIP.

[hkusulja]

@dotdash:

You can't ping a proxy-arp VIP. It should work just fine though. If you need to ping it, use a CARP VIP.

ok, where i can find documentation what is "Other" option in VIPs ?

Can I use CARP without other router ?  (ok i will try)

[dotdash]

You don't want 'other', but here is some info: http://forum.pfsense.org/index.php/topic,3987.msg24632.html#msg24632
You can use CARP on a stand alone system. Just use a unique vhid for each VIP. Set the password to whatever, it doesn't matter.

[hkusulja]

@dotdash:

You don't want 'other', but here is some info: http://forum.pfsense.org/index.php/topic,3987.msg24632.html#msg24632
You can use CARP on a stand alone system. Just use a unique vhid for each VIP. Set the password to whatever, it doesn't matter.

ok, thank you a lot.

I have set the CARP, with unique vhid and any password, and ping, port forwarding etc.. works

thank you , once more..