SOLVED :routing between 2 Lan



  • What is the way to make 2 Lan on different subnet communicate ?
    I have 2 Lans and one Wlan
    I bridged Lan and OPT1(WLAN) /  (192.168.1.0 network)
    OPT2 (192.168.2.0 network)
    My firewalls are allow all on all interfaces
    I can't make these 2 Lan see each others .
    Any idea what will be next ?

    –------------------
    I found the solution :

    I checked "Bypass firewall rules for traffic on the same interface " under "System /advanced"  ,now all the different subnet can communicate .



  • If they are separate subnets, you need to unbridge the interfaces because you need routing. Make sure the clients on both subnets point to the interface address of the corresponding subnet for their default gateway.



  • the problem is not between the bridged networks .

    LAN & OPT1(WLAN) are bridged and on subnet 162.168.1.0 /24 >>the clients on both interfaces can communicate.

    OPT2 is on subnet 192.168.2.0 /24

    The problem is subnet 192.168.1.0/24 can't communicate with subnet 192.168.2.0/24.



  • The clients on both networks reference the pfSense box for their default gateway right?



  • @blak111:

    The clients on both networks reference the pfSense box for their default gateway right?

    both networks can go out to the internet without a problem .



  • I found the solution :

    I checked "Bypass firewall rules for traffic on the same interface  " under "System /advanced"  ,now all the different subnet can communicate .


Log in to reply