Gateway Offline
-
I have imported a config file from an APU1d4 router into a SG-1000 router and after deleting the extra LAN port the device has accepted all settings without reporting errors.
The issue I am having is that the SG-1000 will not run a one of the Gateways. (The "BridgeGW")The faulty gateway is for my Bridge between a Tap VPN client and the Lan. ("BridgeGW")
Gateway:
IPv4
Gateway:10.11.211.254
Monitor IP: 10.11.200.254The Bridge Interface:
Static IP:10.11.211.254/24
IPv6: NoneWan Interface:
Static IP: 10.0.0.98Other Interfaces (All set to IPv4: None & IPv6:None)
LAN1
VPN1DHCP Server:
Bridge: 10.11.211.100 - 109Static Routes:
10.11.200.0/24 Gateway:VPN1 Gateway - 10.11.200.254 Interface: VPN1Gateways:
BridgeGW: Interface:Bridge00 Gateway:10.11.211.254 Monitor IP:10.11.200.254
VPN1_GW: Interface: VPN1 Gateway:10.11.200.254 Monitor IP:
WAN_GW: Interfface: WAN Gateway:10.11.211.254 Monitor IP:139.130.4.5- All interfaces are up
- The VPN1 Tap is connecting to the server (An APU1d4 router) with:
VPN Server Tunnel Settings: IPv4 networks that will be accessible from the remote endpoint: 10.11.200.0/24
I get an error in the System logs:
System Logs/System/Gateways: "BridgeGW 10.11.200.254: Alarm latency 0us stddev 0us loss 100%"
System Logs/System/Routing "no auto-selected prefix on interface cpsw1, disabling advertisements.This config works well on an APU1d4 Netgate Router. Any ideas why this micro-firewall is failing the gateway?