Gateway Offline

Gil

I have imported a config file from an APU1d4 router into a SG-1000 router and after deleting the extra LAN port the device has accepted all settings without reporting errors.
The issue I am having is that the SG-1000 will not run a one of the Gateways. (The "BridgeGW")

The faulty gateway is for my Bridge between a Tap VPN client and the Lan. ("BridgeGW")
Gateway:
IPv4
Gateway:10.11.211.254
Monitor IP: 10.11.200.254

The Bridge Interface:
Static IP:10.11.211.254/24
IPv6: None

Wan Interface:
Static IP: 10.0.0.98

Other Interfaces (All set to IPv4: None & IPv6:None)
LAN1
VPN1

DHCP Server:
Bridge: 10.11.211.100 - 109

Static Routes:
10.11.200.0/24 Gateway:VPN1 Gateway - 10.11.200.254 Interface: VPN1

Gateways:
BridgeGW: Interface:Bridge00 Gateway:10.11.211.254 Monitor IP:10.11.200.254
VPN1_GW: Interface: VPN1 Gateway:10.11.200.254 Monitor IP:
WAN_GW: Interfface: WAN Gateway:10.11.211.254 Monitor IP:139.130.4.5

All interfaces are up
The VPN1 Tap is connecting to the server (An APU1d4 router) with:
VPN Server Tunnel Settings: IPv4 networks that will be accessible from the remote endpoint: 10.11.200.0/24

I get an error in the System logs:
System Logs/System/Gateways: "BridgeGW 10.11.200.254: Alarm latency 0us stddev 0us loss 100%"
System Logs/System/Routing "no auto-selected prefix on interface cpsw1, disabling advertisements.

This config works well on an APU1d4 Netgate Router. Any ideas why this micro-firewall is failing the gateway?

kb8wfh

I am having a similar problem. Did you ever find a solution to this?

Thanks.

Gil

Sorry for the belated reply.

The answer is not specific and definitive.
It appears that FreeBSD is more stringent on the rules it will accept for routing than is NanoBSD.

Look at the way your routes and gateways function.