2.4.0.b.20170511.1545 breaks SG-1000
-
I tried to update the SG-1000 to 2.4.0.b.20170511.1545 yesterday.
-
Tried to update via the GUI. It errored out.
-
Tried updating via the GUI a second time, it seemed to work.
-
Got stuck at boot and never got to load PFSense.
Today I re-flashed the SG-1000 with the latest firmware https://portal.pfsense.org/firmware/sg-1000/
-
Re-loaded my config.
-
Tried to update via the console.
-
It got stuck at boot attempting to rm a whole bunch of stuff.
I'll hold off updating for the next version.
-
-
First, off I am a noob and was wondering if you could tell me the steps you took to re-flash the sg-1000. I followed the manual but keep receiving the "enter full pathname of shell or return for /bin/sh" error. I have tried with micro sd and via the USB OTG with no luck.
-
I followed this guide: https://www.netgate.com/docs/sg-1000/faq.html#how-do-i-restore-the-firewall-os-firmware
And flashed the image to USB using this command: https://www.netgate.com/docs/reference/create-flash-media.html#linux-freebsd-mac-os-x
Then when I had the OTG cable plugged in, with the USB connected, it gave a re-flash option from the console on first boot.
Hope that helps.