Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Guest Wireless Network with pfSense, UniFi Switch, and UniFi AP

    General pfSense Questions
    7
    18
    4.0k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • C
      chrisp87
      last edited by

      Hi,

      We have a virtual machine running pfSense acting as a DHCP server, DNS server, firewall, etc. The modem is connceted to port em0 (WAN) and the UniFi switch (US-8-150W) is connected to port em1 (LAN). Various computers and the UniFi AP (UAP-AC-PRO) are connected to the UniFi switch. The IP address of interface LAN is 10.0.0.1.

      I've attempted to configure a VLAN in pfSense and the UniFi contoller to enable a guest wireless network. I created VLAN 2 and interface OPT1 (assigned to VLAN 2) in pfSense. The IP address of interface OPT1 is 192.168.1.1 and I enabled the DHCP server on this interface. In the UniFi contoller, I created a wireless network named Guest and selected "Use VLAN with VLAN ID 2".

      I've looked through forums and followed tutorials, and this appears to be the correct way of setting up a Guest wireless network. However, I am unable to connect to the wireless network Guest. What is missing from this configuration?

      Thanks.

      ![Screen Shot 2017-05-13 at 11.04.23 AM.png](/public/imported_attachments/1/Screen Shot 2017-05-13 at 11.04.23 AM.png)
      ![Screen Shot 2017-05-13 at 11.04.23 AM.png_thumb](/public/imported_attachments/1/Screen Shot 2017-05-13 at 11.04.23 AM.png_thumb)
      ![Screen Shot 2017-05-13 at 11.10.15 AM.png](/public/imported_attachments/1/Screen Shot 2017-05-13 at 11.10.15 AM.png)
      ![Screen Shot 2017-05-13 at 11.10.15 AM.png_thumb](/public/imported_attachments/1/Screen Shot 2017-05-13 at 11.10.15 AM.png_thumb)
      ![Screen Shot 2017-05-13 at 11.05.55 AM.png](/public/imported_attachments/1/Screen Shot 2017-05-13 at 11.05.55 AM.png)
      ![Screen Shot 2017-05-13 at 11.05.55 AM.png_thumb](/public/imported_attachments/1/Screen Shot 2017-05-13 at 11.05.55 AM.png_thumb)
      ![Screen Shot 2017-05-13 at 1.57.00 PM.png](/public/imported_attachments/1/Screen Shot 2017-05-13 at 1.57.00 PM.png)
      ![Screen Shot 2017-05-13 at 1.57.00 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2017-05-13 at 1.57.00 PM.png_thumb)

      1 Reply Last reply Reply Quote 0
      • A
        AR15USR
        last edited by

        Did you create a Pass rule on OPT1?

        2.6.0-RELEASE

        1 Reply Last reply Reply Quote 0
        • C
          chrisp87
          last edited by

          Thanks for the reply.

          I haven't created any firewall rules for OPT1 yet. To narrow down the problem, I wanted to figure out why I'm unable to connect to the Guest wireless network before configuring the firewall.

          1 Reply Last reply Reply Quote 0
          • C
            Chrismallia
            last edited by

            You have to create a firewall rule to pass DHCP,and internet connection, so start with creating a Any rule, without this rule you will never connect

            1 Reply Last reply Reply Quote 0
            • ?
              Guest
              last edited by

              The VLAN1 is mostly and often used by nearly all vendors as the default VLAN and this could be used by the admin as the
              admin VLAN too, because all devices are inside of this so called default VLAN, changing or suing it in another direction or
              for other things could cause later problems that can´t really solved out or plain identified.
              I would create three VLANs more then;

              • for the various PCs connected to that small switch
                VLAN10-computers-192.168.1.0/24 (255.255.255.0) LAN and internet connection
              • for the private wireless devices secured with FreeRadius Server using certificates
                VLAN20-private_wifi-192.168.2.0/24 LAN and internet connection
              • for the external wireless devices (guests)
                VLAN30-guest_wifi-192.168.3.0/24 enabled client isolation and internet connection only

              I've attempted to configure a VLAN in pfSense and the UniFi contoller to enable a guest wireless network.

              Could be also matching well and running to your case for sure. But please think about that pfSense is offering also a large
              amount of security options easy to install, activate and use for that entire use case like you are trying to set up.

              • OpenLDAP Server fpr the wired computers
              • FreeRadius Server for the private wireless (internal) devices
              • Captive Portal with vouchers system for the guest wireless (external) devices
              1 Reply Last reply Reply Quote 0
              • C
                chrisp87
                last edited by

                Thanks for the replies.

                There are two rules for the LAN interface by default, and I created these same rules for the OPT1 interface. However, I am unable to connect to the Guest wireless network.

                ![Screen Shot 2017-05-19 at 1.01.37 PM.png](/public/imported_attachments/1/Screen Shot 2017-05-19 at 1.01.37 PM.png)
                ![Screen Shot 2017-05-19 at 1.01.37 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2017-05-19 at 1.01.37 PM.png_thumb)
                ![Screen Shot 2017-05-19 at 1.02.53 PM.png](/public/imported_attachments/1/Screen Shot 2017-05-19 at 1.02.53 PM.png)
                ![Screen Shot 2017-05-19 at 1.02.53 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2017-05-19 at 1.02.53 PM.png_thumb)
                ![Screen Shot 2017-05-19 at 1.02.16 PM.png](/public/imported_attachments/1/Screen Shot 2017-05-19 at 1.02.16 PM.png)
                ![Screen Shot 2017-05-19 at 1.02.16 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2017-05-19 at 1.02.16 PM.png_thumb)
                ![Screen Shot 2017-05-19 at 1.02.10 PM.png](/public/imported_attachments/1/Screen Shot 2017-05-19 at 1.02.10 PM.png)
                ![Screen Shot 2017-05-19 at 1.02.10 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2017-05-19 at 1.02.10 PM.png_thumb)

                1 Reply Last reply Reply Quote 0
                • NogBadTheBadN
                  NogBadTheBad
                  last edited by

                  As your not seeing any packets that hit the allow rule I think it's an issue with the trunk port that the ap's connected to.

                  Try a packet capture and have a look in Wireshark

                  Do you get an IP address when connected to a switch via ethernet thats set to vlan 2 ?

                  Also rename the opt1 interface to Guest and block access to the local subnets when it's working :)

                  Andy

                  1 x Netgate SG-4860 - 3 x Linksys LGS308P - 1 x Aruba InstantOn AP22

                  1 Reply Last reply Reply Quote 0
                  • C
                    chrisp87
                    last edited by

                    No, I'm not getting an IP address when I try to connect to the Guest wireless network. Computers are unable to connect to the wireless network (see the attached screenshot). This makes me think the issue lies in the VLAN configuration on the Ubiquiti equipment (either the switch, access point, or both).

                    Does anyone here have experience with VLANs and multiple SSIDs with pfSense and Ubiquiti equipment?

                    ![Screen Shot 2017-05-19 at 2.05.27 PM.png](/public/imported_attachments/1/Screen Shot 2017-05-19 at 2.05.27 PM.png)
                    ![Screen Shot 2017-05-19 at 2.05.27 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2017-05-19 at 2.05.27 PM.png_thumb)

                    1 Reply Last reply Reply Quote 0
                    • NogBadTheBadN
                      NogBadTheBad
                      last edited by

                      Set up a port untagged ( access ) in vlan 2 and connect a pc via ethernet, if that doesn't work check out the port the router connects to.

                      Nope but here's how my Linksys switch is set up :-

                      VLAN ID VLAN
                      2       USER
                      3       GUEST
                      4       IOT
                      5       DMZ
                      6       VOICE
                      4093        Default

                      Unifi controller in GE3, ap in GE2 & router in GE1

                      GE1 Trunk 4093 Admit All Enabled 2T, 3T, 4T, 5T, 6T, 4093UP
                      GE2 Trunk 4093 Admit All Enabled 2T, 3T, 4T, 4093UP
                      GE3 Access 4093 Admit All Enabled 4093UP

                      T = Tagged
                      U = Untagged

                      https://www.youtube.com/watch?v=zoK8N7uB6ho

                      Andy

                      1 x Netgate SG-4860 - 3 x Linksys LGS308P - 1 x Aruba InstantOn AP22

                      1 Reply Last reply Reply Quote 0
                      • NogBadTheBadN
                        NogBadTheBad
                        last edited by

                        You can also do a tcpdump from the ap,  interface eth0.X X=vlan ID

                        mac-pro:~ andyk$ ssh admin@ap-1
                        admin@ap-1's password:

                        BusyBox v1.19.4 (2017-04-13 16:15:06 PDT) built-in shell (ash)
                        Enter 'help' for a list of built-in commands.

                        BZ.v3.7.55# ifconfig -a
                        ath0      Link encap:Ethernet  HWaddr 80:2A:A8:97:9D:8C 
                                  inet6 addr: fe80::822a:a8ff:fe97:9d8c/64 Scope:Link
                                  UP BROADCAST RUNNING PROMISC ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:213887 errors:6 dropped:6 overruns:0 frame:0
                                  TX packets:1348980 errors:0 dropped:3280934 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:41600604 (39.6 MiB)  TX bytes:1234013163 (1.1 GiB)

                        ath1      Link encap:Ethernet  HWaddr 82:2A:A8:97:9D:8C 
                                  inet6 addr: fe80::802a:a8ff:fe97:9d8c/64 Scope:Link
                                  UP BROADCAST RUNNING PROMISC ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:34585 errors:3 dropped:3 overruns:0 frame:0
                                  TX packets:51198 errors:0 dropped:57986 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:38302015 (36.5 MiB)  TX bytes:70419182 (67.1 MiB)

                        ath2      Link encap:Ethernet  HWaddr 92:2A:A8:97:9D:8C 
                                  inet6 addr: fe80::902a:a8ff:fe97:9d8c/64 Scope:Link
                                  UP BROADCAST RUNNING PROMISC ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:135587 errors:0 dropped:0 overruns:0 frame:0
                                  TX packets:4722276 errors:0 dropped:103 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:25571266 (24.3 MiB)  TX bytes:3736547134 (3.4 GiB)

                        ath3      Link encap:Ethernet  HWaddr 80:2A:A8:98:9D:8C 
                                  BROADCAST PROMISC ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
                                  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

                        ath3.2    Link encap:Ethernet  HWaddr 80:2A:A8:98:9D:8C 
                                  BROADCAST ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
                                  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

                        ath3.3    Link encap:Ethernet  HWaddr 80:2A:A8:98:9D:8C 
                                  BROADCAST ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
                                  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

                        ath3.4    Link encap:Ethernet  HWaddr 80:2A:A8:98:9D:8C 
                                  BROADCAST ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
                                  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

                        ath4      Link encap:Ethernet  HWaddr 82:2A:A8:98:9D:8C 
                                  inet6 addr: fe80::802a:a8ff:fe98:9d8c/64 Scope:Link
                                  UP BROADCAST RUNNING PROMISC ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:3884367 errors:3059 dropped:3059 overruns:0 frame:0
                                  TX packets:8445514 errors:20775 dropped:1311 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:1141510972 (1.0 GiB)  TX bytes:2623914446 (2.4 GiB)

                        ath5      Link encap:Ethernet  HWaddr 92:2A:A8:98:9D:8C 
                                  inet6 addr: fe80::902a:a8ff:fe98:9d8c/64 Scope:Link
                                  UP BROADCAST RUNNING PROMISC ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:150 errors:0 dropped:0 overruns:0 frame:0
                                  TX packets:109 errors:5 dropped:58062 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:26326 (25.7 KiB)  TX bytes:55143 (53.8 KiB)

                        ath6      Link encap:Ethernet  HWaddr A2:2A:A8:98:9D:8C 
                                  inet6 addr: fe80::a02a:a8ff:fe98:9d8c/64 Scope:Link
                                  UP BROADCAST RUNNING PROMISC ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:1369623 errors:17 dropped:17 overruns:0 frame:0
                                  TX packets:2075569 errors:9959 dropped:815 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:192941660 (184.0 MiB)  TX bytes:3002466372 (2.7 GiB)

                        br0      Link encap:Ethernet  HWaddr 80:2A:A8:96:9D:8C 
                                  inet addr:172.16.1.11  Bcast:172.16.1.255  Mask:255.255.255.0
                                  inet6 addr: fe80::822a:a8ff:fe96:9d8c/64 Scope:Link
                                  UP BROADCAST RUNNING ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:992831 errors:0 dropped:544 overruns:0 frame:0
                                  TX packets:505813 errors:0 dropped:0 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:93349951 (89.0 MiB)  TX bytes:280369726 (267.3 MiB)

                        br0.2    Link encap:Ethernet  HWaddr 80:2A:A8:96:9D:8C 
                                  UP BROADCAST RUNNING ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:4249931 errors:0 dropped:1108 overruns:0 frame:0
                                  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:2957666172 (2.7 GiB)  TX bytes:0 (0.0 B)

                        br0.3    Link encap:Ethernet  HWaddr 80:2A:A8:96:9D:8C 
                                  UP BROADCAST RUNNING ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:58082 errors:0 dropped:0 overruns:0 frame:0
                                  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:10662123 (10.1 MiB)  TX bytes:0 (0.0 B)

                        br0.4    Link encap:Ethernet  HWaddr 80:2A:A8:96:9D:8C 
                                  UP BROADCAST RUNNING ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:4439648 errors:0 dropped:8 overruns:0 frame:0
                                  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:3255456016 (3.0 GiB)  TX bytes:0 (0.0 B)

                        eth0      Link encap:Ethernet  HWaddr 80:2A:A8:96:9D:8C 
                                  inet6 addr: fe80::822a:a8ff:fe96:9d8c/64 Scope:Link
                                  UP BROADCAST RUNNING PROMISC ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:20503846 errors:0 dropped:24098 overruns:0 frame:0
                                  TX packets:6143133 errors:0 dropped:0 overruns:0 carrier:0
                                  collisions:0 txqueuelen:1000
                                  RX bytes:4182787280 (3.8 GiB)  TX bytes:1734278600 (1.6 GiB)
                                  Interrupt:4

                        eth0.2    Link encap:Ethernet  HWaddr 80:2A:A8:96:9D:8C 
                                  UP BROADCAST RUNNING PROMISC ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:12819546 errors:0 dropped:0 overruns:0 frame:0
                                  TX packets:4097401 errors:0 dropped:0 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:14406471951 (13.4 GiB)  TX bytes:1178268853 (1.0 GiB)

                        eth0.3    Link encap:Ethernet  HWaddr 80:2A:A8:96:9D:8C 
                                  UP BROADCAST RUNNING PROMISC ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:118131 errors:0 dropped:0 overruns:0 frame:0
                                  TX packets:34732 errors:0 dropped:0 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:78603267 (74.9 MiB)  TX bytes:37566793 (35.8 MiB)

                        eth0.4    Link encap:Ethernet  HWaddr 80:2A:A8:96:9D:8C 
                                  UP BROADCAST RUNNING PROMISC ALLMULTI MULTICAST  MTU:1500  Metric:1
                                  RX packets:6549050 errors:0 dropped:0 overruns:0 frame:0
                                  TX packets:1505181 errors:0 dropped:0 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:6415384228 (5.9 GiB)  TX bytes:215523504 (205.5 MiB)

                        lo        Link encap:Local Loopback 
                                  inet addr:127.0.0.1  Mask:255.0.0.0
                                  inet6 addr: ::1/128 Scope:Host
                                  UP LOOPBACK RUNNING  MTU:16436  Metric:1
                                  RX packets:268 errors:0 dropped:0 overruns:0 frame:0
                                  TX packets:268 errors:0 dropped:0 overruns:0 carrier:0
                                  collisions:0 txqueuelen:0
                                  RX bytes:10568 (10.3 KiB)  TX bytes:10568 (10.3 KiB)

                        wifi0    Link encap:UNSPEC  HWaddr 80-2A-A8-97-9D-8C-00-00-00-00-00-00-00-00-00-00 
                                  UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
                                  RX packets:26921498 errors:1294525 dropped:0 overruns:0 frame:1294525
                                  TX packets:54708715 errors:203086 dropped:0 overruns:0 carrier:0
                                  collisions:0 txqueuelen:4095
                                  RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
                                  Interrupt:47 Memory:b8100000-b8120000

                        wifi1    Link encap:UNSPEC  HWaddr 80-2A-A8-98-9D-8C-00-00-00-00-00-00-00-00-00-00 
                                  UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
                                  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
                                  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
                                  collisions:0 txqueuelen:4095
                                  RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
                                  Interrupt:40 Memory:b2000000-b2200000

                        BZ.v3.7.55# tcpdump -i eth0.3
                        tcpdump: WARNING: eth0.3: no IPv4 address assigned
                        tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
                        listening on eth0.3, link-type EN10MB (Ethernet), capture size 65535 bytes
                        19:39:43.408947 IP6 fe80::208:a2ff:fe0a:9dcb > ff02::1: ICMP6, router advertisement, length 144
                        19:39:48.960463 IP6 fe80::208:a2ff:fe0a:9dcb > ff02::1: ICMP6, router advertisement, length 144
                        19:40:00.968894 IP6 fe80::208:a2ff:fe0a:9dcb > ff02::1: ICMP6, router advertisement, length 144

                        Andy

                        1 x Netgate SG-4860 - 3 x Linksys LGS308P - 1 x Aruba InstantOn AP22

                        1 Reply Last reply Reply Quote 0
                        • C
                          chrisp87
                          last edited by

                          Thank you for the details.

                          I added a "Network/VLAN" to port 1 (UniFi access point) and port 10 (pfSense router) in the UniFi controller. I only took screenshots of the port 1 configuration since port 10 has the same configuration. The Guest Network/VLAN now appears to be tagged on these ports. However, there is no trunk mode option in the configuration, and I am still unable to connect to the Guest wireless network. I understand that the VLAN configuration may be slightly different for Ubiquiti equipment, but does this configuration appear correct?

                          ![Screen Shot 2017-05-19 at 5.09.26 PM.png](/public/imported_attachments/1/Screen Shot 2017-05-19 at 5.09.26 PM.png)
                          ![Screen Shot 2017-05-19 at 5.09.26 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2017-05-19 at 5.09.26 PM.png_thumb)
                          ![Screen Shot 2017-05-19 at 5.09.16 PM.png](/public/imported_attachments/1/Screen Shot 2017-05-19 at 5.09.16 PM.png)
                          ![Screen Shot 2017-05-19 at 5.09.16 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2017-05-19 at 5.09.16 PM.png_thumb)
                          ![Screen Shot 2017-05-19 at 5.10.01 PM.png](/public/imported_attachments/1/Screen Shot 2017-05-19 at 5.10.01 PM.png)
                          ![Screen Shot 2017-05-19 at 5.10.01 PM.png_thumb](/public/imported_attachments/1/Screen Shot 2017-05-19 at 5.10.01 PM.png_thumb)

                          1 Reply Last reply Reply Quote 0
                          • DerelictD
                            Derelict LAYER 8 Netgate
                            last edited by

                            This is not ubnt support, right?

                            Chattanooga, Tennessee, USA
                            A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                            DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                            Do Not Chat For Help! NO_WAN_EGRESS(TM)

                            1 Reply Last reply Reply Quote 0
                            • C
                              chrisp87
                              last edited by

                              I understand that this is not Ubiquiti support. I initially posted the question on https://community.ubnt.com, but it has been a week and nobody has replied to my post. VLANs, and networking in general, is similar regardless of the equipment manufacturer, and since I'm running pfSense as my router, I figured I would ask here. I've already learned a lot more and received more support on this forum than the Ubiquiti community.

                              1 Reply Last reply Reply Quote 0
                              • NogBadTheBadN
                                NogBadTheBad
                                last edited by

                                Think it looks right but I'm viewing this from my phone.

                                Andy

                                1 x Netgate SG-4860 - 3 x Linksys LGS308P - 1 x Aruba InstantOn AP22

                                1 Reply Last reply Reply Quote 0
                                • NogBadTheBadN
                                  NogBadTheBad
                                  last edited by

                                  Try on the ap :-

                                  tcpdump -n -i eth0 -e | grep vlan

                                  You'll see lines scrolling past with vlan numbers if the switch is tagging packets.

                                  Andy

                                  1 x Netgate SG-4860 - 3 x Linksys LGS308P - 1 x Aruba InstantOn AP22

                                  1 Reply Last reply Reply Quote 0
                                  • ?
                                    Guest
                                    last edited by

                                    Does anyone here have experience with VLANs and multiple SSIDs with pfSense and Ubiquiti equipment?

                                    For setting pup VLAN here you might be setting up two SSIDs and two VLANs and put each SSID in one VLAN! They must
                                    be then both tagged ones!

                                    1 Reply Last reply Reply Quote 0
                                    • DerelictD
                                      Derelict LAYER 8 Netgate
                                      last edited by

                                      Ubiquiti APs need to be managed via the untagged VLAN. For SSIDs you can tag the VLAN. It's pretty much that simple.

                                      Chattanooga, Tennessee, USA
                                      A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                                      DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                                      Do Not Chat For Help! NO_WAN_EGRESS(TM)

                                      1 Reply Last reply Reply Quote 0
                                      • johnpozJ
                                        johnpoz LAYER 8 Global Moderator
                                        last edited by

                                        ^yup!! The management has to be untagged - this has been a big complaint from many people..  So you can run a SSID with no tag if you want that on the same layer 2 as your management network.  Or all of your ssids can be on different vlans, either static or you can set them dynamic as well.

                                        So my controller and AP are on my wlan 20 vlan, so on the trunk port connected to my AP vlan 20 is the pvid and is untagged.  This is the same network as my eap-tls authed ssid.  Then the other 3 ssids are for iot devices, guests and stuff that can not do eap-tls..  these 3 vlans are tagged.

                                        An intelligent man is sometimes forced to be drunk to spend time with his fools
                                        If you get confused: Listen to the Music Play
                                        Please don't Chat/PM me for help, unless mod related
                                        SG-4860 24.03 | Lab VMs 2.7.2, 24.03

                                        1 Reply Last reply Reply Quote 0
                                        • First post
                                          Last post