Missing interface
-
Hi,
I need assistance here because I don't really understand what's the problem.
I wanted to setup traffic shaper because am giving wifi connection to my neighbor so I created a vlan for him. That part is working fine.
My problem is in traffic shaper tab I am missing WAN interface, so I am not able to setup any traffic shaping.
I only have my LAN and OPT1 interface.
If i go into interface assign tab I see everything: WAN, LAN and OPT1
I am running on 2.3.3-RELEASE
I don’t know if it could be related but my WAN interface is a USB network card tho I was able to see it before creating my second VLAN.
Hope someone will be able to help me.
Thanks,
Sebastien -
If the interface does not appear in the list of interfaces on the traffic shaper page, then the NIC most likely does not support ALTQ shaping. I don't think any USB NICs do support that, so it's not surprising. You won't be able to use traffic shaping on that network adapter.
-
Hi jimp,
thanks for your reply. I tough i saw the interface WAN before creating the VLAN but I maybe mistaking.
I will try to find another machine to setup my pfsense than.
Thanks
Sebastien
