Slow upload speed
-
I use pfSense on a Intel NUC54250. Incoming WAN goes to a Netgear GS108E and I use 1 Vlan for the WAN and 1 Vlan for my LAN.
This has been working well for a year now, no issues with up/down speed. Last week we changed ISP and upgraded from a 100Mbit to a 1000Mbit plan and since then the upload speed has been very low.
Upload speed used to be ~125Mbit on my previous plan, now it's ~90, and it should be Gbit. Download speed is in the area of ~900Mbit so that's fine.I've tested the LAN throughput using filetransfers and Iperf, it's Gbit speed.
Iperf between pfSense and LAN clients is also done at Gbit speed.
Dashboard indicates 1000baseT <full-duplex> on WAN and LAN.
I¨ve tested with a laptop and connected it straight to the WAN, it gets Gbit speed in both directions.Dmesg
em0: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k=""> port 0xf080-0xf09f mem 0xf7d00000-0xf7d1ffff,0xf7d2c000-0xf7d2cfff irq 20 at device 25.0 on pci0 em0: Using an MSI interrupt em0: netmap queues/slots: TX 1/1024, RX 1/1024</intel(r)>Does anyone have an idea of what's wrong?</full-duplex>
-
Shameless bump. I can't figure out what's wrong, does anyone have some input?
-
perhaps an mtu or related issue ?