Change DSCP for traffic from WAN to my LAN from CS1 to AF22
-
Hello all,
I have noticed that Traffic from my WAN to my LAN is always tagged by the ISP as CS1. Local Lan Traffic to other local LAN traffic Seems to have a DSCP of AF32. I would like to elevate the LAN traffic that is destined to my LAN from the WAN from CS1 to AF22. I have attempted to create a rule (firewall - rules - floating point)
Quick: checked for apply action immediately on match
Interface: LAN
Direction: out
Address Family: IPV4+IPV6
source: WAN net
Destination: LAN net
Diffserv Code Point: AF22However, this does not seem to do what i want as further packet captures still show traffic from the WAN to the LAN on the LAN interface is set to CS1.
I checked the Pfsense Docs for DSCP "https://doc.pfsense.org/index.php/DiffServ" and found that it notes that "Current versions of pfSense do not support the setting or changing of DiffServ values, only matching". It looks like the last time that page was updated was november 2014. is FPSense still not supporting changing DSCP values on packets or did I setup my rule incorrectly?
if this isn't supported has anyone is there a work around that anyone knows of?
-
The page is still accurate. It is not possible to set DSCP.
-
Is the current version yet support ? thanks !!
I am currently having a cheap China router less then USD 10 to do such Retag at this moement for all outbound at this moement -
No.
