Sg4860 problem: att isp does not connect even to webconfigurator
-
Hello,
I have a sg4860 and I have not been able to bring up webconfigurator.
I get to the sg4860 console via 'screen' command from intel nuc/linux.
(Does ANY UBUNTU/FEDORA carry minicom/cu/screen WITHOUT apt?)
My ISP is ATT but their box mostly supplies WIFI. I have a direct line from att
opt port to the SG4860's wan. BUT
the shell shell from sg4860 console says:
netstat -rn -4
dest gateway
127.0.0.1 link#10 UH lo0
192.168.1.0/24 link #2 U igb1
192.168.1.1 link#1 UHS lo0
192.168.1.240 link#2 UHS lo0
192.168.1.254 0:8:a2
y:z UHS igb1I cannot bring up webconfigurator or ping 192.168.1.254.
Note : wan is reported at console as igb1 and lan is reported as igb0
Security: an old zyxel based wifi usb dongle seems to cause crashes of pfsense.
-
Hello,
I have a sg4860 and I have not been able to bring up webconfigurator.
I get to the sg4860 console via 'screen' command from intel nuc/linux.
(Does ANY UBUNTU/FEDORA carry minicom/cu/screen WITHOUT apt?)
My ISP is ATT but their box mostly supplies WIFI. I have a direct line from att
opt port to the SG4860's wan. BUT
the shell shell from sg4860 console says:
netstat -rn -4
dest gateway
127.0.0.1 link#10 UH lo0
192.168.1.0/24 link #2 U igb1
192.168.1.1 link#1 UHS lo0
192.168.1.240 link#2 UHS lo0
192.168.1.254 0:8:a2y:z UHS igb1I cannot bring up webconfigurator or ping 192.168.1.254.
Note : wan is reported at console as igb1 and lan is reported as igb0
Security: an old zyxel based wifi usb dongle seems to cause crashes of pfsense.you have 192.168.1.0/24 network on WAN so you can not use 192.168.1.0/24 on lan.
go command line, change lan network to 192.168.0.0/24 (192.168.0.1 addres on lan interface)
apply config.
now you will able reach from lan via https://192.168.0.1