IPSec question…
-
Office A is the HQ office.
Office B is a satellite office
Office C is a satellite officeBoth offices B and C have IPSec tunnels connecting to office A.
Files, folders, IP phones all connect ok to office A and vise versa.However then trying to send/recieve files/folders/IP phone from office B to office C or vise versa, this doesn't work.
Only communications through office A work, when communicating from office B to C, they don't work.My question is, why is this?
Have I input an incorrect DNS or Gateway IP?
Is there additional settings I have to implement?Thanks for any info you could share, much appreciated.
-
you have to "supernet" it with a bigger subnet mask in IPSec settings which contains all 3 Subnets! Routing across Tunnels ist not possible with 1.2 …
EmL
-
you have to "supernet" it with a bigger subnet mask in IPSec settings which contains all 3 Subnets!
…could I get a translation on that please...? Thanks.
I'm guessing that means, no?
-
Why not just make tunnels from B to C and C to B?
-
hehe…that was my example... the reality is that it's actually one HQ office, and 4 field offices...
...would creating tunnels between ALL these field offices work?
...that would be 20 tunnels! Sheeesh LOL....
-
…could I get a translation on that please...? Thanks.
I'm guessing that means, no?
Net A = 192.168.0.0 /24
Net B = 192.168.1.0 /24
Net C = 192.168.2.0 /24Subnet in IPSec settings
192.168.0.0 /22
(= 192.168.0.0 / 255.255.252.0)
(= 192.168.0.1 - 192.168.3.254)EmL
-
I assume this work work with the following solution to as the remote branches are all a "class c" subnet correct? and just creating a "class b" subnet on the HQ location would allow traffic to pass between the remote sites?
A 192.168.0.0/22 HQ
B 192.168.2.0/24 Remote
C 192.168.3.0/24 Remote
D 192.168.4.0/24 Remote
E 192.168.5.0/24 Remote
F 192.168.6.0/24 Remote
G 192.168.7.0/24 Remote
H 192.168.8.0/24 Remote
J 192.168.9.0/24 Remote
