Problem with 2 transparent bridges
-
Hi,
I am using the 1.2 release pfsense. I have 4 intel nics in the firewall. I want to create two bridges, every bridge is connected to a seperated network and they need to stay seperate. So WAN+LAN is a bridge for network1 and OPT1(WAN)+OPT2(LAN) is a bridge for network1. WAN is the provider, and LAN is the internal switch.
However it does not work. When I go to the interface status tab, all intefaces are listed as bridge0. I checked on LAN bridge with WAN and I checked on OPT2 bridge with OPT1.
However I suspected to have bridge0 en bridge1. Is there anything I did wrong, or is this a limitation? Or can I fix this by hacking in the configuration file?
Thank you very much.
-
when checking with ifconfig. bridge0 has all the members. And this is wrong. There should be a bridge0 and a bridge1. Is this a limitation of the 1.2 version? Or am I doing something wrong?
-
Can you try 1.2.1 it should handle this better.
Also if it does not work your option might be 2.0.But you have to provide more details to give a resolution.
-
I tried 1.2.1 and it has the same issue.
What kind of details do you need?
I want to have 2 bridges: bridge0:lan+wan bridge1:opt1+opt2
if you set this in the webinterface then you have one bridge (look onder system, interfaces): bridge0: lan+wan+opt1+opt2
-
Anyone?
Is there a way to create bridge0 and bridge1? Or isn't this in 1.2? Is this going to be in 2.0?
Thanks