NAT not working n PFSENSE 2440
-
hello,
I have Nat entry to access the Wireless controller to be access using WAN ip of PFSense , but it doesn't seems to work , if you can please help me in resolving it .
Thanks
I have below NAT rule
Interface WAN
Protocol TCP
Source Subnet 1.1.1.1/24
Destination -WAN address
Destination port 3389 MS-RDP
NAT IP 2.2.2.2
NAT port 443
And Firewall rule is
Protocol IPV4 TCP
Source Subnet 1.1.1.1/24
Source Port Any
Destination Ip 2.2.2.2
Destination Port 443
But it still doesn't work .
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.