No initial connection - no lan connection (installation)



  • Hello

    I just installed pfSense-CE-2.3.4-RELEASE-4g-amd64-nanobsd on a msata 16GB SSD.
    With this command:```
    sudo dd if=pfSense-CE-2.3.4-RELEASE-4g-amd64-nanobsd.img of=/dev/disk3 bs=1m

    My apu2 with the ssd seems to boot fine. It makes some funny noise when it seems to be finsh with the boot-process.
    **I don't have a serial-wire.**  :(
    I thought I could connect with lan.
    The RJ45 LED is on. But I can't connect to 192.168.1.1\. There is also no DHCP-Lease for my client.
    

    --- 192.168.1.1 ping statistics ---
    3 packets transmitted, 0 packets received, 100.0% packet loss

    Any ideas what's the problem? Is the installation not possible without the serialport-connection?
    
    Thanks a lot and regards




  • well, now they do  :o
    Thank you very much  :-* ;)
    solved!


Log in to reply