PPPoE -> Clicking on disconnect removes the LAN IP (!)



  • Here's another one for you…

    After a while running on a router instead of Pfsense, waiting for the PPPoE problems to be mostly fixed, I decided to give it a try again...

    If I go to the Status -> Interface section, and click on the "Disconnect" button, the system seems to be working in the background... and working... and working again... until you get a "Page unreachable" after a while.

    Going to the console and refreshing the display shows the IP of the LAN is gone, while the one for PPPoE is still there. Setting the IP again allow me to enter back the Web Interface.

    Seems the disconnect buttons trash the connection to the wrong interface...  :(

    Back on my ol' good router  :)

    Ark



  • Give the next snapshot a try i fixed the issues and thanks for reporting.



  • Hi,

    It seems to be fixed in my environment with Sun Nov 30 21:11:20 EST 2008 build.

    @ArkAngel:

    Going to the console and refreshing the display shows the IP of the LAN is gone, while the one for PPPoE is still there. Setting the IP again allow me to enter back the Web Interface.

    That was ouch  ;D

    cheers,


Log in to reply