Port Forwarding not working while routing traffic over OpenVPN interface
-
I recently setup a OpenVPN connection to route all traffic over that VPN which is working. Prior to setting that up I had port forwarding on 22 and 80 to accept incoming WAN connections. I also had firewall rules to allow 22 and 80 with port forwarding.
Once the new routing was set up, inbound traffic on 22+80 stopped working. I tried setting the gateway as WAN in the firewall rules advanced options, but did not seem to work.
I'm running pfsense 2.4.0.
Any ideas what to look at?
-
What ip(s) are port 80 and 22 being forwarded to? You would need to setup a superseding rule to make the gateway of that IP address be pfsense's default gateway. I suspect the IP address is pfsense's LAN IP so just make the rule and the mask would be /32 and move it ahead of the rule that directs all the other traffic over the VPN.
By the way if I'm right about the LAN IP I suggest you use https.