VLAN internet access plus routing issue - Cisco SG300 & ESX 6.5

[johnpoz]

Yes you need to create a gateway under gateways.  Then create routes under static routes to use that gateway to get to your downstream networks.

[SubX]

just created LAN gateway and two route one for VLAN 1 and one for VLAN 8.

Now, device from both VLAN 1 and 8 can log in to pfSense (192.168.99.2) , how ever CAN'T ping 192.168.99.2. Check firewall rules, rules allow any port.

What should I check next?

Thanks,

[SubX]

Add two more firewall rules in LAN  - one to allow VLAN 1 to access LAN, one to allow VLAN 8.

Now VLAN 1 & 8 CAN access internet.

So far, everything is fine now. Just wait to see if Bell Hub 3000 will reboot frequently or not. Keep finger cross.

Thanks Johnpoz for all the help !!!! A Big Thank You to you and others who give me a hand !!!

[SubX]

Bad news, this setup works for around 1 hour before Bell Hub 3000 start to reboot. The same symptom returned when I switched to Bell FTTH service. Before the old DSL modem works without any problem.

Any suggestion here, I will go with pfSense +  L2 Switch option where pfSense acts as router to see if the same issue will emerge.

For the pfSense + L2 Switch setup, I will start another post to seek help.