IpSec VPN NAT port 80



  • Hello.
    I have built IPSec vpn between the center and the factory. There are PfSense on both tarmt. 2.3.2-RELEASE-p1 (amd64)

    Headquarters: 170.170.70.0/24
    Factory: 10.0.0.0/16 structure.

    When I want to go to the port side of a rope 80 on the factory side by the center, VDSL is trying to get out with VDSL.
    But there is no problem when I want to go to port 443 of the same ipn in the factory. Could this cause problems?

    Central client ip: 170.170.70.87
    factory client ip: 10.0.0.142

    Below is a log view explaining the situation.

    Lan Rule Tablom:


Log in to reply