IPsec + NAT



  • Hello people good night!

    I've used pfSense a while ago and never had any major problems, but now I've installed the latest version and tunnel a VPN with a Cisco ASA, in which VPN established, as shown below.

    But to get there on the other side, I used a NAT from my local network, from 10.10.10.0/24 to 172.18.60.0/24, in which in the remote network of Cisco we configured the 172.18.60.0/24 and with that I can not reach there, I do not know if I'm leaving any configuration missing.

    Please, I ask your help.


Log in to reply