Make host go out specific WAN interface
-
That NAT looks fine.
You have a pfSense interface with the 10.100.1.254 address on it.
That interface has firewall rules on it.
What are those?
What, specifically, are you doing that is not working? You are going to need at least some troubleshooting skills to be able to make something like that operate.
-
i attach a better network diagram including my static routes
https://s18.postimg.org/v2d0so15l/my_network.png
but i would had thought this rule that i attach works as i dont see it not working
https://s18.postimg.org/vduh5aruh/rules.png
my three top rules are for my alias "vpnclients" which in the diagram i showed you is my windows PC with the VPN IP
and the bottom rule is for my "internalnet" to go out to the internet this is the manage and VM subnets
but when i plug in the ethernet cable in my NIC which is on the VPN network i have network access ie i can see the LAN but not the WAN which i would have thought it would of been going out the proton vpn gateway but its not working
-
What is Allint ??
-
allnet is all my actual interface NICS ie manage (i call it home) DMZ and proton vpn
mmm… maybe i shouldnt put proton vpn in the all interfaces as really my all interfaces should be my acyual physical NICS on pfsense, what do you reckon?
-
So it's an interface group?
Those are generally only useful on LAN interfaces where all interfaces in the group need exactly the same rules. There are other reasons (like reply-to that make them not very useful on WAN interface.
Instead of taking short cuts you might want to stick to just rules on interface tabs for now.
-
thanks derelict, i will try that
sorry havnt replied just personal issues atm
-
sorted!!!
i made a stupid mistake
when i was making the vpn interface (so i can use it as a gateway for my specific vpn traffic) i ticked both boxes under "reserved networks" which blocks rfc1918 but i dont want to block them as the virtual vpn ip im assigned is 10.8.0.2 which is a rfc1918 address
i put back protonvpn interface back in the "ALLInt" so i can easily manage the rules under one tab as its long winded otherwise
also in firewall > rules > outbound i had to make it hybrid and copy the wan and make another one for the protonvpn address as it didnt work otherwise
see pic of what i did
https://s10.postimg.org/jk6oiio7t/rule.png
thanks for all your help in this Derelict much appreciated!
