Multicast routing.
-
pass in on $WAN inet proto udp to 224.0.0.0/4 pass out on $WAN inet proto igmp from $WANIP to 224.0.0.0/4 allow-opts pass in on $LANINT inet proto igmp from $SETBOX to 224.0.0.0/4 allow-opts pass in on $LANINT inet proto udp from $SETBOX pass in on $LANINT inet proto tcp from $SETBOXI have searched files and found similar strings like this in /etc/inc/filter.inc but am unsure if this is the right file to plug into. Where else other than the gui can I create these rules?
Dzieki
-
Ok can everybody try the latest snapshot it has improvements and you can set the allow-opts option under "Advanced options" selections.
It is presented as a checkbox. -
would this work to route multicast through a vpn or am i still dreaming?
-
It should help if you have correct spd for the ipsec
-
Hmm seems still not to work. Some explanation:
10.123.104.100 -> Media Receiver
10.123.104.0/24 -> IPTV Subnet on VLAN8# igmpproxy -d -c /var/etc/igmpproxy.conf igmpproxy, Version 0.1 beta2, Build 090105 Copyright 2005 by Johnny Egeland <johnny@rlo.org>Distributed under the GNU GENERAL PUBLIC LICENSE, Version 2 - check GPL.txt Debu: Searching for config file at '/var/etc/igmpproxy.conf' Debu: Config: Quick leave mode enabled. Debu: Config: Got a phyint token. Debu: Config: IF: Config for interface pppoe0. Debu: Config: IF: Got upstream token. Debu: Config: IF: Got ratelimit token '0'. Debu: Config: IF: Got threshold token '1'. Debu: Config: IF: Got altnet token 217.0.119.0/24. Debu: Config: IF: Altnet: Parsed altnet to 217.0.119/24. Debu: Config: IF: Got altnet token 193.158.35.0/24. Debu: Config: IF: Altnet: Parsed altnet to 193.158.35/24. Debu: IF name : pppoe0 Debu: Next ptr : 0 Debu: Ratelimit : 0 Debu: Threshold : 1 Debu: State : 1 Debu: Allowednet ptr : 2820c040 Debu: Config: Got a phyint token. Debu: Config: IF: Config for interface vlan8. Debu: Config: IF: Got downstream token. Debu: Config: IF: Got ratelimit token '0'. Debu: Config: IF: Got threshold token '1'. Debu: IF name : vlan8 Debu: Next ptr : 0 Debu: Ratelimit : 0 Debu: Threshold : 1 Debu: State : 2 Debu: Allowednet ptr : 0 Debu: Config: Got a phyint token. Debu: Config: IF: Config for interface lo0. Debu: Config: IF: Got disabled token. Debu: IF name : lo0 Debu: Next ptr : 0 Debu: Ratelimit : 0 Debu: Threshold : 1 Debu: State : 0 Debu: Allowednet ptr : 0 Debu: Config: Got a phyint token. Debu: Config: IF: Config for interface vlan1. Debu: Config: IF: Got disabled token. Debu: IF name : vlan1 Debu: Next ptr : 0 Debu: Ratelimit : 0 Debu: Threshold : 1 Debu: State : 0 Debu: Allowednet ptr : 0 Debu: Config: Got a phyint token. Debu: Config: IF: Config for interface vlan7. Debu: Config: IF: Got disabled token. Debu: IF name : vlan7 Debu: Next ptr : 0 Debu: Ratelimit : 0 Debu: Threshold : 1 Debu: State : 0 Debu: Allowednet ptr : 0 Debu: Config: Got a phyint token. Debu: Config: IF: Config for interface vlan3. Debu: Config: IF: Got disabled token. Debu: IF name : vlan3 Debu: Next ptr : 0 Debu: Ratelimit : 0 Debu: Threshold : 1 Debu: State : 0 Debu: Allowednet ptr : 0 Debu: Config: Got a phyint token. Debu: Config: IF: Config for interface vlan4. Debu: IF name : vlan4 Debu: Next ptr : 0 Debu: Ratelimit : 0 Debu: Threshold : 1 Debu: State : 2 Debu: Allowednet ptr : 0 Debu: Adding Physical Index value of IF 'lo0' is 6 Debu: buildIfVc: Interface lo0 Addr: 127.0.0.1, Flags: 0xffff8049, Network: 127/8 Debu: Adding Physical Index value of IF 'vlan0' is 9 Debu: buildIfVc: Interface vlan0 Addr: 10.123.101.254, Flags: 0xffff8843, Network: 10.123.101/24 Debu: buildIfVc: Interface vlan0 Addr: 10.123.101.254, Flags: 0xffff8843, Network: 10.123.100.8/29 Debu: buildIfVc: Interface vlan0 Addr: 10.123.101.254, Flags: 0xffff8843, Network: 10.123.100.24/29 Debu: Adding Physical Index value of IF 'vlan2' is 11 Debu: buildIfVc: Interface vlan2 Addr: 172.20.43.136, Flags: 0xffff8843, Network: 172.20/16 Debu: Adding Physical Index value of IF 'vlan3' is 12 Debu: buildIfVc: Interface vlan3 Addr: 10.123.102.254, Flags: 0xffff8843, Network: 10.123.102/24 Debu: buildIfVc: Interface vlan3 Addr: 10.123.102.254, Flags: 0xffff8843, Network: 10.123.100.16/29 Debu: Adding Physical Index value of IF 'vlan4' is 13 Debu: buildIfVc: Interface vlan4 Addr: 10.123.104.254, Flags: 0xffff8843, Network: 10.123.104/24 Debu: Adding Physical Index value of IF 'pppoe0' is 14 Debu: buildIfVc: Interface pppoe0 Addr: 87.154.197.225, Flags: 0xffff88d1, Network: 87.154.197.225/32 Debu: Found config for vlan3 Debu: Found config for vlan4 Debu: Found config for pppoe0 Note: adding VIF, Ix 0 Fl 0x0 IP 0xfe657b0a vlan0, Threshold: 1, Ratelimit: 0 Debu: Network for [vlan0] : 10.123.100.24/29 Debu: Network for [vlan0] : 10.123.100.8/29 Debu: Network for [vlan0] : 10.123.101/24 Note: adding VIF, Ix 1 Fl 0x0 IP 0x882b14ac vlan2, Threshold: 1, Ratelimit: 0 Debu: Network for [vlan2] : 172.20/16 Note: adding VIF, Ix 2 Fl 0x0 IP 0xfe667b0a vlan3, Threshold: 1, Ratelimit: 0 Debu: Network for [vlan3] : 10.123.100.16/29 Debu: Network for [vlan3] : 10.123.102/24 Note: adding VIF, Ix 3 Fl 0x0 IP 0xfe687b0a vlan4, Threshold: 1, Ratelimit: 0 Debu: Network for [vlan4] : 10.123.104/24 Note: adding VIF, Ix 4 Fl 0x0 IP 0xe1c59a57 pppoe0, Threshold: 1, Ratelimit: 0 Debu: Network for [pppoe0] : 87.154.197.225/32 Debu: Network for [pppoe0] : 217.0.119/24 Debu: Network for [pppoe0] : 193.158.35/24 Debu: Got 232448 byte buffer size in 8 iterations Debu: Joining all-routers group 224.0.0.2 on vif 10.123.101.254 Note: joinMcGroup: 224.0.0.2 on vlan0 Debu: Joining all-routers group 224.0.0.2 on vif 172.20.43.136 Note: joinMcGroup: 224.0.0.2 on vlan2 Debu: Joining all-routers group 224.0.0.2 on vif 10.123.104.254 Note: joinMcGroup: 224.0.0.2 on vlan4 Info: sendto to 224.0.0.1 on 10.123.101.254; Errno(22): Invalid argument Debu: SENT Membership query from 10.123.101.254 to 224.0.0.1 Debu: Sent membership query from 10.123.101.254 to 224.0.0.1\. Delay: 10 Info: sendto to 224.0.0.1 on 172.20.43.136; Errno(22): Invalid argument Debu: SENT Membership query from 172.20.43.136 to 224.0.0.1 Debu: Sent membership query from 172.20.43.136 to 224.0.0.1\. Delay: 10 Info: sendto to 224.0.0.1 on 10.123.104.254; Errno(22): Invalid argument Debu: SENT Membership query from 10.123.104.254 to 224.0.0.1 Debu: Sent membership query from 10.123.104.254 to 224.0.0.1\. Delay: 10 Debu: Created timeout 1 (#0) - delay 10 secs Debu: (Id:1, Time:10) Debu: Created timeout 2 (#1) - delay 21 secs Debu: (Id:1, Time:10) Debu: (Id:2, Time:21) Warn: received packet from 10.123.104.100 shorter (40 bytes) than hdr+data length (24+4072) Warn: received packet from 10.123.104.100 shorter (40 bytes) than hdr+data length (24+4072) Warn: received packet from 10.123.104.100 shorter (40 bytes) than hdr+data length (24+4072) Debu: About to call timeout 1 (#0) Debu: Aging routes in table. Debu: Current routing table (Age active routes); ----------------------------------------------------- Debu: No routes in table... Debu: ----------------------------------------------------- Warn: received packet from 10.123.104.100 shorter (40 bytes) than hdr+data length (24+4072) Warn: received packet from 10.123.104.100 shorter (40 bytes) than hdr+data length (24+4072)</johnny@rlo.org>And here my config:
##------------------------------------------------------ ## Enable Quickleave mode (Sends Leave instantly) ##------------------------------------------------------ quickleave ##------------------------------------------------------ ## Configuration for em0 (Upstream Interface) ##------------------------------------------------------ phyint pppoe0 upstream ratelimit 0 threshold 1 # altnet 10.0.0.0/8 # altnet 132.185.0.0/16 # BBC multicast trial altnet 217.0.119.0/24 # T-Home Entertain altnet 193.158.35.0/24 # T-Home Entertain ##------------------------------------------------------ ## Configuration for ipw0 (Downstream Interface) ##------------------------------------------------------ phyint vlan8 downstream ratelimit 0 threshold 1 ##------------------------------------------------------ ## Configuration for lo0 (Disabled Interface) ##------------------------------------------------------ phyint lo0 disabled phyint vlan1 disabled phyint vlan7 disabled phyint vlan3 disabled phyint vlan4 disabled -
Can you pose a packet trace with tcpdump on the interface that you are supposed to get igmp traffic with tcpdump -i $interface -s 0 proto igmp or without the traffic filter 'proto igmp'.
-
http://www.file-upload.net/download-1408907/iptv.dump.html
Okay this is the dump.
-
Hmm can any of you try setting the interfaces where multicast should pass in promisous mode with
ifconfig $interface promiscand after that start the proxy?
If it does not work ok in the latest snapshot which have an update on igmpproxy. -
the last 2 snapshots i've tried are now missing igmpproxy
-
try next snapshots.
-
There is a GUI now for igmpproxy under Services -> IGMP proxy.
Please report your findings.
-
Hi ermal,
first of all: Thanks for all the efforts so far.
2.) The IGMP proxy menu looks nice, but as soon as I want to save a device's configuration (any combination whatsoever), I am redirected to a page saying something like "Page does not exist for user. Logout" - I assume that the configuration file is not written correctly? After that (when I logout), I cannot login anymore and can only reset pfSense to factory settings. So to anyone who wants to test it: Please be aware that your configuration file might be destroyed.
If I can help regarding this matter, please instruct what I should do.
3.) I assume that you have included the FreeBSD patched version if igmpproxy? I have included it in an older ALPHA myself by patching and compiling it on another machine and have transferred it to the pfSense machine. Actually, using the new version manually (due to the webConfig flaw), I have encountered that the ErrNo(22) FINALLY is gone - also with the version that is included in the latest ALPHAs.
So far, so good - igmpproxy seems to work perfect on first sight, though igmpproxy does not report any connection tries from the T-Entertain SetTopBox via IGMP. To be brief: My SetTopBox behaves as if igmpproxy is not running and freezes after 10 seconds of any program start / change.
What I did try then was your hint regarding the promisc mode.
I finally seemed to have succeeded, because the SetTopBox was trying to connect, but still the picture freezed. When I was checking in debug mode, I found the following debugging message which seemed to be suspicious:
"Eliminate compiler warning for field type = 22"
22 …? Sounds familiar ...
Any ideas of what I could do or how I could help to trace the possible error?
Cheers,
Frank
-
Well if you see even a message like
"Should insert group %s (from: %s) to route table. Vif Ix : %d" before that message than everything should be ok AFAIK.Even a traffic capture on the lan(downstream) side to know if the group is joined correctly and some traffic is passing should help.
Check you have the allow-opts as is needed on the rules and if you need to permit any other traffic for the service to work.
For the GUI should be ok on next snapshot i forgot to merge something for the parser.
-
hi,
i'm back to using pfsense and I noticed that now there is a igmpproxy package for 1.2.2 & .3rcX, I assume that the package is based on this thread…
So could somebody please look into this: http://forum.pfsense.org/index.php/topic,16943.0.html
-
I got igmp working by correctly adding rules, and correctly assigning interfaces.
- You want to first set up the interfaces.
a) Your upstream interface will be the origin of the multicast packets. (in my case it was a fuppes server on a different network)
Interface - LAN
Description - "upstream" (or whatever you want)
Type - Upstream Interface
Network - 192.168.0.0 CIDR - 24b) Your downstream interface will be the destination or what is asking for multicast packets. (in my case it was the wireless where my ps3 was on)
Interface - WLAN
Description - "downstream" (or whatever you want)
Type - Downstream Interface
Network - 192.168.1.0 CIDR - 24- The rules can get a little tricky. Leave anything not specified blank or at its default setting. Lets start with the upstream interface (LAN).
a) Create a new rule for the IGMP packets on the upstream interface (LAN)
Action - Pass
Interface - LAN
Protocol - IGMP
Source -
Type: Single host or alias
Address: 192.168.0.32 (my fuppes/multicast server)
Destination -
Type: Network
Address: 224.0.0.0 / 4 (multicast)
Advanced Options -
Check the box for allowing packets to pass, leave the fields blank
Description - "Multicast IGMP" (or anything you want)b) Create a second rule for the UDP packets on the upstream interface (LAN)
Action - Pass
Interface - LAN
Protocol - UDP
Source -
Type: any
Destination -
Type: Network
Address: 224.0.0.0 / 4 (multicast)
Description - "Multicast UDP" (or anything you want)- Now we setup rules for the downstream interface (WLAN). Also leave anything not specified blank or at its default setting.
a) Create a new rule for the IGMP packets on the downstream interface (WLAN)
Action - Pass
Interface - WLAN
Protocol - IGMP
Source -
Type: Single host or alias
Address: 192.168.1.75 (ps3)
Destination -
Type - any
Advanced Options -
Check the box for allowing packets to pass, leave the fields blank
Description - "ps3 Multicast UDP" (or anything you want)b) Create a second rule for the UDP packets on the downstream interface (WLAN)
Action - Pass
Interface - WLAN
Protocol - UDP
Source -
Type: Single host or alias
Address: 192.168.1.75 (ps3)
Destination -
Type: any
Description - "ps3 Multicast UDP" (or anything you want)c) Create a third rule for the TCP packets on the downstream interface (WLAN)
Action - Pass
Interface - WLAN
Protocol - TCP
Source -
Type: Single host or alias
Address: 192.168.1.75 (ps3)
Destination -
Type: any
Description - "ps3 Multicast TCP" (or anything you want)That's how I got multicast to work on my network. I am not sure if creating the rules for UDP and TCP packets are completely necessary, or if this may cause any security risks yet. Maybe someone can read this and further tweak the settings.
Good luck! ;)buddah
-
Well its not working here (using 1.2.3-RC2 built on Thu Jul 23 17:25:52 EDT 2009)
/tmp/igmpproxy.conf(as created by the gui):
##------------------------------------------------------ ## Enable Quickleave mode (Sends Leave instantly) ##------------------------------------------------------ quickleave phyint ng0 upstream ratelimit 0 threshold 1 altnet 239.35.0.0/16 altnet 217.0.119.0/24 altnet 193.158.35.0/24 phyint em0 downstream ratelimit 0 threshold 1 altnet 192.168.0.0/24rules on wan interface (upstream):
rules on lan interface (downstream):
Advanced Options-> Checkbox is enabled and fields are blank on all rules.
Debug output from igmpproxy:
# igmpproxy -d -c /tmp/igmpproxy.conf igmpproxy, Version 0.1 beta2, Build 090427 Copyright 2005 by Johnny Egeland <johnny@rlo.org>Distributed under the GNU GENERAL PUBLIC LICENSE, Version 2 - check GPL.txt Debu: Searching for config file at '/tmp/igmpproxy.conf' Debu: Config: Quick leave mode enabled. Debu: Config: Got a phyint token. Debu: Config: IF: Config for interface ng0. Debu: Config: IF: Got upstream token. Debu: Config: IF: Got ratelimit token '0'. Debu: Config: IF: Got threshold token '1'. Debu: Config: IF: Got altnet token 239.35.0.0/16. Debu: Config: IF: Altnet: Parsed altnet to 239.35/16. Debu: Config: IF: Got altnet token 217.0.119.0/24. Debu: Config: IF: Altnet: Parsed altnet to 217.0.119/24. Debu: Config: IF: Got altnet token 193.158.35.0/24. Debu: Config: IF: Altnet: Parsed altnet to 193.158.35/24. Debu: IF name : ng0 Debu: Next ptr : 0 Debu: Ratelimit : 0 Debu: Threshold : 1 Debu: State : 1 Debu: Allowednet ptr : 2820c030 Debu: Config: Got a phyint token. Debu: Config: IF: Config for interface em0. Debu: Config: IF: Got downstream token. Debu: Config: IF: Got ratelimit token '0'. Debu: Config: IF: Got threshold token '1'. Debu: Config: IF: Got altnet token 192.168.0.0/24. Debu: Config: IF: Altnet: Parsed altnet to 192.168.0/24. Debu: IF name : em0 Debu: Next ptr : 0 Debu: Ratelimit : 0 Debu: Threshold : 1 Debu: State : 2 Debu: Allowednet ptr : 2820c060 Debu: Adding Physical Index value of IF 'em0' is 1 Debu: buildIfVc: Interface em0 Addr: 192.168.0.10, Flags: 0xffff8843, Network: 192.168.0/24 Debu: Adding Physical Index value of IF 'lo0' is 8 Debu: buildIfVc: Interface lo0 Addr: 127.0.0.1, Flags: 0xffff8049, Network: 127/8 Debu: Adding Physical Index value of IF 'ng0' is 10 Debu: buildIfVc: Interface ng0 Addr: 79.238.127.78, Flags: 0xffff88d1, Network: 79.238.127.78/32 Debu: Found config for em0 Debu: Found config for ng0 Note: adding VIF, Ix 0 Fl 0x0 IP 0x0a00a8c0 em0, Threshold: 1, Ratelimit: 0 Debu: Network for [em0] : 192.168.0/24 Debu: Network for [em0] : 192.168.0/24 Note: adding VIF, Ix 1 Fl 0x0 IP 0x4e7fee4f ng0, Threshold: 1, Ratelimit: 0 Debu: Network for [ng0] : 79.238.127.78/32 Debu: Network for [ng0] : 239.35/16 Debu: Network for [ng0] : 217.0.119/24 Debu: Network for [ng0] : 193.158.35/24 Debu: Got 262144 byte buffer size in 0 iterations Debu: Joining all-routers group 224.0.0.2 on vif 192.168.0.10 Note: joinMcGroup: 224.0.0.2 on em0 Debu: SENT Membership query from 192.168.0.10 to 224.0.0.1 Debu: Sent membership query from 192.168.0.10 to 224.0.0.1\. Delay: 10 Debu: Created timeout 1 (#0) - delay 10 secs Debu: (Id:1, Time:10) Debu: Created timeout 2 (#1) - delay 21 secs Debu: (Id:1, Time:10) Debu: (Id:2, Time:21) Debu: Packet from 192.168.0.10: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV V2 member report from 192.168.0.10 to 224.0.0.2 (ip_hl 24, data 8) Note: The IGMP message was from myself. Ignoring. Debu: Packet from 192.168.0.10: proto: 2 hdrlen: 20 iplen: 8 or 2048 Note: RECV Membership query from 192.168.0.10 to 224.0.0.1 (ip_hl 20, data 8) Debu: Packet from 192.168.0.1: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV V2 member report from 192.168.0.1 to 239.255.255.250 (ip_hl 24, data 8) Debu: Should insert group 239.255.255.250 (from: 192.168.0.1) to route table. Vif Ix : 0 Debu: No existing route for 239.255.255.250\. Create new. Debu: No routes in table. Insert at beginning. Info: Inserted route table entry for 239.255.255.250 on VIF #0 Debu: Joining group 239.255.255.250 upstream on IF address 79.238.127.78 Note: joinMcGroup: 239.255.255.250 on ng0 Debu: Current routing table (Insert Route); ----------------------------------------------------- Debu: #0: Dst: 239.255.255.250, Age:2, St: I, OutVifs: 0x00000001 Debu: ----------------------------------------------------- Debu: Eliminate compiler warning for field type = 22 Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV V2 member report from 79.238.127.78 to 239.255.255.250 (ip_hl 24, data 8) Note: The IGMP message was from myself. Ignoring. Debu: Packet from 192.168.0.2: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV V2 member report from 192.168.0.2 to 239.35.129.11 (ip_hl 24, data 8) Debu: Should insert group 239.35.129.11 (from: 192.168.0.2) to route table. Vif Ix : 0 Debu: No existing route for 239.35.129.11\. Create new. Debu: Found existing routes. Find insert location. Debu: Inserting at beginning, before route 239.255.255.250 Info: Inserted route table entry for 239.35.129.11 on VIF #0 Debu: Joining group 239.35.129.11 upstream on IF address 79.238.127.78 Note: joinMcGroup: 239.35.129.11 on ng0 Debu: Current routing table (Insert Route); ----------------------------------------------------- Debu: #0: Dst: 239.35.129.11, Age:2, St: I, OutVifs: 0x00000001 Debu: #1: Dst: 239.255.255.250, Age:2, St: I, OutVifs: 0x00000001 Debu: ----------------------------------------------------- Debu: Eliminate compiler warning for field type = 22 Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV V2 member report from 79.238.127.78 to 239.35.129.11 (ip_hl 24, data 8) Note: The IGMP message was from myself. Ignoring. Debu: Packet from 192.168.0.2: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV V2 member report from 192.168.0.2 to 239.35.129.11 (ip_hl 24, data 8) Debu: Should insert group 239.35.129.11 (from: 192.168.0.2) to route table. Vif Ix : 0 Info: Updated route entry for 239.35.129.11 on VIF #0 Debu: Current routing table (Insert Route); ----------------------------------------------------- Debu: #0: Dst: 239.35.129.11, Age:2, St: I, OutVifs: 0x00000001 Debu: #1: Dst: 239.255.255.250, Age:2, St: I, OutVifs: 0x00000001 Debu: ----------------------------------------------------- Debu: Eliminate compiler warning for field type = 22 Debu: Packet from 192.168.0.2: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV V2 member report from 192.168.0.2 to 224.0.0.251 (ip_hl 24, data 8) Debu: Should insert group 224.0.0.251 (from: 192.168.0.2) to route table. Vif Ix : 0 Debu: No existing route for 224.0.0.251\. Create new. Debu: Found existing routes. Find insert location. Debu: Inserting after route 239.255.255.250 Info: Inserted route table entry for 224.0.0.251 on VIF #0 Debu: Joining group 224.0.0.251 upstream on IF address 79.238.127.78 Note: joinMcGroup: 224.0.0.251 on ng0 Debu: Current routing table (Insert Route); ----------------------------------------------------- Debu: #0: Dst: 239.35.129.11, Age:2, St: I, OutVifs: 0x00000001 Debu: #1: Dst: 239.255.255.250, Age:2, St: I, OutVifs: 0x00000001 Debu: #2: Dst: 224.0.0.251, Age:2, St: I, OutVifs: 0x00000001 Debu: ----------------------------------------------------- Debu: Eliminate compiler warning for field type = 22 Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV V2 member report from 79.238.127.78 to 224.0.0.251 (ip_hl 24, data 8) Note: The IGMP message was from myself. Ignoring. Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV V2 member report from 79.238.127.78 to 239.35.129.11 (ip_hl 24, data 8) Note: The IGMP message was from myself. Ignoring. Debu: Packet from 192.168.0.10: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV V2 member report from 192.168.0.10 to 224.0.0.2 (ip_hl 24, data 8) Note: The IGMP message was from myself. Ignoring. Debu: Packet from 192.168.0.2: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV Leave message from 192.168.0.2 to 224.0.0.2 (ip_hl 24, data 8) Debu: Got leave message from 192.168.0.2 to 239.35.129.11\. Starting last member detection. Debu: Leaving group 239.35.129.11 upstream on IF address 79.238.127.78 Note: leaveMcGroup: 239.35.129.11 on ng0 Debu: SENT Membership query from 192.168.0.10 to 239.35.129.11 Debu: Sent membership query from 192.168.0.10 to 239.35.129.11\. Delay: 10 Debu: Created timeout 3 (#1) - delay 8 secs Debu: (Id:1, Time:2) Debu: (Id:3, Time:8) Debu: (Id:2, Time:13) Debu: Packet from 192.168.0.2: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV V2 member report from 192.168.0.2 to 239.35.140.11 (ip_hl 24, data 8) Debu: Should insert group 239.35.140.11 (from: 192.168.0.2) to route table. Vif Ix : 0 Debu: No existing route for 239.35.140.11\. Create new. Debu: Found existing routes. Find insert location. Debu: Inserting after route 239.35.129.11 Info: Inserted route table entry for 239.35.140.11 on VIF #0 Debu: Joining group 239.35.140.11 upstream on IF address 79.238.127.78 Note: joinMcGroup: 239.35.140.11 on ng0 Debu: Current routing table (Insert Route); ----------------------------------------------------- Debu: #0: Dst: 239.35.129.11, Age:2, St: I, OutVifs: 0x00000001 Debu: #1: Dst: 239.35.140.11, Age:2, St: I, OutVifs: 0x00000001 Debu: #2: Dst: 239.255.255.250, Age:2, St: I, OutVifs: 0x00000001 Debu: #3: Dst: 224.0.0.251, Age:2, St: I, OutVifs: 0x00000001 Debu: ----------------------------------------------------- Debu: Eliminate compiler warning for field type = 22 Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV V2 member report from 79.238.127.78 to 239.35.140.11 (ip_hl 24, data 8) Note: The IGMP message was from myself. Ignoring. Debu: Packet from 192.168.0.2: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV V2 member report from 192.168.0.2 to 239.35.140.11 (ip_hl 24, data 8) Debu: Should insert group 239.35.140.11 (from: 192.168.0.2) to route table. Vif Ix : 0 Info: Updated route entry for 239.35.140.11 on VIF #0 Debu: Current routing table (Insert Route); ----------------------------------------------------- Debu: #0: Dst: 239.35.129.11, Age:2, St: I, OutVifs: 0x00000001 Debu: #1: Dst: 239.35.140.11, Age:2, St: I, OutVifs: 0x00000001 Debu: #2: Dst: 239.255.255.250, Age:2, St: I, OutVifs: 0x00000001 Debu: #3: Dst: 224.0.0.251, Age:2, St: I, OutVifs: 0x00000001 Debu: ----------------------------------------------------- Debu: Eliminate compiler warning for field type = 22 Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV V2 member report from 79.238.127.78 to 239.255.255.250 (ip_hl 24, data 8) Note: The IGMP message was from myself. Ignoring. Debu: About to call timeout 1 (#0) Debu: Aging routes in table. Debu: Current routing table (Age active routes); ----------------------------------------------------- Debu: #0: Dst: 239.35.129.11, Age:2, St: I, OutVifs: 0x00000001 Debu: #1: Dst: 239.35.140.11, Age:2, St: I, OutVifs: 0x00000001 Debu: #2: Dst: 239.255.255.250, Age:1, St: I, OutVifs: 0x00000001 Debu: #3: Dst: 224.0.0.251, Age:1, St: I, OutVifs: 0x00000001 Debu: ----------------------------------------------------- Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV V2 member report from 79.238.127.78 to 224.0.0.251 (ip_hl 24, data 8) Note: The IGMP message was from myself. Ignoring. Debu: Packet from 217.0.119.33: proto: 2 hdrlen: 24 iplen: 12 or 3072 Note: RECV Membership query from 217.0.119.33 to 224.0.0.1 (ip_hl 24, data 12) Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV V2 member report from 79.238.127.78 to 224.0.0.251 (ip_hl 24, data 8) Note: The IGMP message was from myself. Ignoring. Debu: Packet from 79.238.127.78: proto: 2 hdrlen: 24 iplen: 8 or 2048 Note: RECV V2 member report from 79.238.127.78 to 239.255.255.250 (ip_hl 24, data 8) Note: The IGMP message was from myself. Ignoring. ^CWarn: select() failure; Errno(4): Interrupted system call Note: Got a interupt signal. Exiting. Debu: clean handler called Debu: Removing route entry for 239.35.129.11 Note: Route is not active. No kernel updates done. Debu: Leaving group 239.35.129.11 upstream on IF address 79.238.127.78 Note: leaveMcGroup: 239.35.129.11 on ng0 Warn: MRT_DROP_MEMBERSHIP failed; Errno(49): Can't assign requested address Debu: Removing route entry for 239.35.140.11 Note: Route is not active. No kernel updates done. Debu: Leaving group 239.35.140.11 upstream on IF address 79.238.127.78 Note: leaveMcGroup: 239.35.140.11 on ng0 Debu: Removing route entry for 239.255.255.250 Note: Route is not active. No kernel updates done. Debu: Leaving group 239.255.255.250 upstream on IF address 79.238.127.78 Note: leaveMcGroup: 239.255.255.250 on ng0 Debu: Removing route entry for 224.0.0.251 Note: Route is not active. No kernel updates done. Debu: Leaving group 224.0.0.251 upstream on IF address 79.238.127.78 Note: leaveMcGroup: 224.0.0.251 on ng0 Note: All routes removed. Routing table is empty. Info: Shutdown complete.... #</johnny@rlo.org>