New system - NICs usage on Dell T110 ii
-
Hi guys, I'm new here and I will need some help on basics. I spent my time in electronics working on embedded logic systems where we spent a lot of time preventing access to the boards not encouraging it so all this network stuff is new to me.
I built my system on a standard used Dell T110 ii server and I have left it pretty much as I purchased it. E3-1240 CPU, 8 GB of RAM and a 360 GB or so WD drive. Pfsense 2.4 installed just fine.
My question is on NICs usage. The Dell has one shared NIC which, as a server, covered data transfer and BIOS level system access. I have added a PCI Intel 4-port card. What would you recommend for the NIC usage? Presently I am leaning towards WAN into one of the PCI connectors and LAN into the board based connector. They are both GB speed.
Any comments yes or no for this layout?
Brian
-
LAN and WAN on the extra NIC. Use the on-board NIC for management only.
-
Thanks Grimson
Your suggestion worked fine. System is up and running now with an Actiontec C1000A as modem, Dell T110 ii server as pfsense and an Asus RT-AC66U as wifi extender.
Brian
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy