VPN Site to site IPSEC
-
and if I only have an ipsec connection between headquarters A and D
but in the headquarters D I want to see the headquarters B
all other venues are configured and seen with WIMAX
how do I pass the routing table?attached network image
![Sin título.png](/public/imported_attachments/1/Sin título.png)
![Sin título.png_thumb](/public/imported_attachments/1/Sin título.png_thumb) -
and if I only have an ipsec connection between headquarters A and D
but in the headquarters D I want to see the headquarters B
all other venues are configured and seen with WIMAX
how do I pass the routing table?You put the local and remote networks on that tunnel.
On the tunnel between A and D you would make a P2 for D to B.
-
and if I only have an ipsec connection between headquarters A and D
but in the headquarters D I want to see the headquarters B
all other venues are configured and seen with WIMAX
how do I pass the routing table?You put the local and remote networks on that tunnel.
On the tunnel between A and D you would make a P2 for D to B.
I do not understand you
![Sin título.png](/public/imported_attachments/1/Sin título.png)
![Sin título.png_thumb](/public/imported_attachments/1/Sin título.png_thumb) -
If you are going to refer to sites as A, B, C, and D it would be helpful to have that information on your diagram.
-
hello, I modified the scheme
I have added the HEADQUARTERS E
This is really my topography
I currently have a vpn Ipsec between the HEADQUARTERS A and E
all other HEADQUARTERS , except E, are communicated by WIMAX
I want to pass the routing table to E headquarters, from the others HEADQUARTERS so I can see them all![Sin título.png](/public/imported_attachments/1/Sin título.png)
![Sin título.png_thumb](/public/imported_attachments/1/Sin título.png_thumb) -
So you already have a Phase 2 entry on the VPN for this:
10.1.0.0/16 <-> 10.5.0.0/16
Make 3 more:
10.2.0.0/16 <-> 10.5.0.0/16
10.3.0.0/16 <-> 10.5.0.0/16
10.4.0.0/16 <-> 10.5.0.0/16Obviously with the reciprocal entries at Site E.
Add routes to sites B, C, and D those sites for 10.5.0.0/16 with a gateway of whatever they talk to at site A.
Make sure all necessary firewall rules pass the desired traffic.
-
and how do I do this without leaving the connection by wimax with the others HEADQUARTERS ?
-
What?
-
if I configure this in VPN tunnel,in both extremes
10.1.0.0/16 <-> 10.5.0.0/16
Make 3 more:
10.2.0.0/16 <-> 10.5.0.0/16
10.3.0.0/16 <-> 10.5.0.0/16
10.4.0.0/16 <-> 10.5.0.0/16I lose communication by wimax between headquarters
A-D
A-B
A-C
….....I do not know if I explain
-
No you don't.
10.2.0.0/16 <-> 10.5.0.0/16 is not the same thing as 10.2.0.0/16 <-> 10.1.0.0/16