Ipsec Asa Vpn
-
Hello community,
I hope you can help me with this problem, I have already configured the ipsec tunnel Asa, PFsense –-- to --- Cisco Firewall
these are my encryption phases:
ike = 3des-sha1-modp1536 #Phase 1: modp1536 = DH group 5
esp = 3des-md5-modp1024 #Phase 2PFsense ip side public = X.X.X.X------------------------------ Cisco Firewall ip public = X.X.X.X
subnet = 192.168.105.0 / 24 subnet = XX.XXX.236.126 / 32 <------192.168.16.109As I mention the tunnel is already established, but to be able to access the subnet of Cisco XX.XXX.236.126/32, I have to make a nat with this ip that I was assigned ---> 192.168.16.109
You can guide me a little so that my subnet 192.168.105.0/24 consumes the services of 10.225.236.126 through 192.168.16.109
Greetings.
Pablo I.G.
-
From your "diagram", they are the ones who have to NAT.
What is the IPsec access list on the ASA side?
What is the phase 2 defined on your side (including any NAT if present there) ?