LTE-Modem Huawei E352

theHubi

Hello community.
I'm having a problem with getting my lte modem working.

I've checked the list and the device is under supported hardware. I've also tried all cuaUs and singled out the correct port.
Now I get an error whenever it tries to connect.

pfSense 2.4.2-RELEASE-p1 on a Zotac ZBox nano

Mar 14 10:21:40 ppp [opt2_link0] LCP: Down event
Mar 14 10:21:40 ppp [opt2_link0] Link: DOWN event
Mar 14 10:21:40 ppp [opt2_link0] MODEM: chat script failed
Mar 14 10:21:40 ppp [opt2_link0] CHAT: The modem responded with "ERROR" to the command "AT&F&C1&D2E0S0=0M1" at ModemCmd: label.
Mar 14 10:21:40 ppp [opt2_link0] CHAT: Detected Hayes compatible modem.
Mar 14 10:21:40 ppp [opt2_link0] CHAT: +CGDCONT=1,"IP","business.gprsinternet"
Mar 14 10:21:40 ppp [opt2_link0] Link: reconnection attempt 950

I've read someone with a different device (though also huawei lte) got his working using the string without "S0=0". Tried that, doesn't work for me
The only difference I've noticed, with the custom string it shows "custom modem" instead of "Hayes compatible modem".

Any idea how to proceed?
I've tried checking all the options, reading and analysing device info via Putty, but I've hit a wall.

Any help is greatly appreciated!

Edit01:
I've found somewhere to try "cu -s 115200 -l cuaU0.0"
Give me:
Connected

AT+CSQ
+CSQ: 3,99

Sadly though, I have no idea what that means.

Edit02:
I don't know if this helps, but here's my usb device description

ugen0.2: <hua wei="" huawei="" mobile=""> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0000  <probed by="" interface="" class="">
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0040
  idVendor = 0x12d1
  idProduct = 0x1001
  bcdDevice = 0x0000
  iManufacturer = 0x0001  <hua wei="">
  iProduct = 0x0007  <huawei mobile="">
  iSerialNumber = 0x0000  <no string="">
  bNumConfigurations = 0x0001</no></huawei></hua></probed></hua>

I don't know how to get the correct PID (as it does not seem to be listed here)

Maybe I'll give you a bit of backstory:

Before I was using Kerio with 3 NICs, 1 WAN, 1 LAN and 1 Fallback.
On the Fallback-NIC I connected a TP-Link Router which the USB-Modem plugged into.
Sadly the Kerio firewall broke (as in it's not blocking anything anymore; anything goes)
Therefore easiest way would be to just plug in the TP-Link router again, but with the change in hardware now I only have 2 NICs available, not 3.
Hence me trying to connect the modem directly via USB.

Edit03:
Here's a "dir /dev/cua*; dmesg"

usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <encrypt decrypt=""> at device 26.0 (no driver attached)
hdac0: <intel (0x2284)="" hda="" controller=""> mem 0x81510000-0x81513fff irq 22 at devic e 27.0 on pci0
pcib1: <acpi pci-pci="" bridge=""> at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pcib2: <acpi pci-pci="" bridge=""> at device 28.1 on pci0
pci1: <acpi pci="" bus=""> on pcib2
re0: <realtek 8111="" 8168="" b="" c="" cp="" d="" dp="" e="" f="" g="" pcie="" gigabit="" ethernet=""> port 0xe000-0xe 0ff mem 0x81400000-0x81400fff,0xa0100000-0xa0103fff irq 17 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <mii bus=""> on re0
rgephy0: <rtl8251 1000base-t="" media="" interface=""> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX , 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1 000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:01:2e:6f:dc:02
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <acpi pci-pci="" bridge=""> at device 28.2 on pci0
pci2: <acpi pci="" bus=""> on pcib3
re1: <realtek 8111="" 8168="" b="" c="" cp="" d="" dp="" e="" f="" g="" pcie="" gigabit="" ethernet=""> port 0xd000-0xd 0ff mem 0x81300000-0x81300fff,0xa0000000-0xa0003fff irq 18 at device 0.0 on pci2
re1: Using 1 MSI-X message
re1: Chip rev. 0x4c000000
re1: MAC rev. 0x00000000
miibus1: <mii bus=""> on re1
rgephy1: <rtl8251 1000base-t="" media="" interface=""> PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX , 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1 000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 00:01:2e:6f:dc:03
re1: netmap queues/slots: TX 1/256, RX 1/256
pcib4: <acpi pci-pci="" bridge=""> at device 28.3 on pci0
pci3: <acpi pci="" bus=""> on pcib4
pci3: <network> at device 0.0 (no driver attached)
isab0: <pci-isa bridge=""> at device 31.0 on pci0
isa0: <isa bus=""> on isab0
acpi_button0: <power button=""> on acpi0
acpi_button1: <sleep button=""> on acpi0
acpi_tz0: <thermal zone=""> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: cannot reserve I/O port range
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
est0: <enhanced speedstep="" frequency="" control=""> on cpu0
est1: <enhanced speedstep="" frequency="" control=""> on cpu1
est2: <enhanced speedstep="" frequency="" control=""> on cpu2
est3: <enhanced speedstep="" frequency="" control=""> on cpu3
Timecounters tick every 1.000 msec
nvme cam probe device init
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mmc0: No compatible cards found on bus
hdacc0: <realtek alc892="" hda="" codec=""> at cad 0 on hdac0
hdaa0: <realtek alc892="" audio="" function="" group=""> at nid 1 on hdacc0
pcm0: <realtek alc892="" (left="" analog)=""> at nid 20 and 24 on hdaa0
pcm1: <realtek alc892="" (left="" digital)=""> at nid 30 on hdaa0
hdacc1: <intel (0x2883)="" hda="" codec=""> at cad 2 on hdac0
hdaa1: <intel (0x2883)="" audio="" function="" group=""> at nid 1 on hdacc1
pcm2: <intel (0x2883)="" (hdmi="" dp="" 8ch)=""> at nid 7 on hdaa1
pcm3: <intel (0x2883)="" (hdmi="" dp="" 8ch)=""> at nid 5 on hdaa1
pcm4: <intel (0x2883)="" (hdmi="" dp="" 8ch)=""> at nid 6 on hdaa1
uhub0: 13 ports with 13 removable, self powered
ugen0.2: <hua wei="" huawei="" mobile=""> at usbus0
u3g0 on uhub0
u3g0: <3G Modem> on usbus0
u3g0: Found 3 ports.
umass0 on uhub0
umass0: <usb mass="" storage=""> on usbus0
umass1 on uhub0
umass1: <usb mass="" storage=""> on usbus0
ugen0.3: <vendor 0x1a40="" usb="" 2.0="" hub=""> at usbus0
uhub1 on uhub0
uhub1: <vendor 2="" 9="" 0x1a40="" usb="" 2.0="" hub,="" class="" 0,="" rev="" 2.00="" 1.11,="" addr=""> on usbus0
uhub1: 4 ports with 4 removable, self powered
ugen0.4: <generic usb2.0-crw=""> at usbus0
umass2 on uhub1
umass2: <bulk-in, bulk-out,="" interface=""> on usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <sata ssd="" s9fm02.8=""> ACS-3 ATA SATA 3.x device
ada0: Serial Number E7CB0767190B00649215
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 30533MB (62533296 512 byte sectors)
cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0
cd0: <huawei mass="" storage="" 2.31=""> Removable CD-ROM SCSI-2 device
cd0: 40.000MB/s transfers
cd0: 29MB (15222 2048 byte sectors)
cd0: quirks=0x10<10_BYTE_ONLY>
da1 at umass-sim2 bus 2 scbus4 target 0 lun 0
da1: <generic- sd="" mmc="" ms="" pro="" 1.00=""> Removable Direct Access SPC-2 SCSI device
da1: Serial Number 20120926571200000
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2 <no_6_byte>da0 at umass-sim1 bus 1 scbus3 target 0 lun 0
da0: <huawei sd="" storage="" 2.31=""> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2 <no_6_byte>Trying to mount root from ufs:/dev/gptid/b04e99f9-c615-11e7-9acf-00012e6fdc02 [r w]...
re0: link state changed to DOWN
vlan0: changing name to 're0.21'
re1: link state changed to DOWN
ng0: changing name to 'ppp0'
re1: link state changed to UP
re0: link state changed to UP
re0.21: link state changed to UP
tun1: changing name to 'ovpnc1'
pflog0: promiscuous mode enabled
ovpnc1: link state changed to UP
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
arpresolve: can't allocate llinfo for 85.233.117.73 on re1
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ng0: changing name to 'ppp0'
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ovpnc1: link state changed to DOWN
ovpnc1: link state changed to UP
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ovpnc1: link state changed to DOWN
ovpnc1: link state changed to UP
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ovpnc1: link state changed to DOWN
ovpnc1: link state changed to UP
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'</vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></no_6_byte></huawei></no_6_byte></generic-></huawei></sata></vendor></bulk-in,></generic></vendor></vendor></usb></usb></hua></intel></intel></intel></intel></intel></realtek></realtek></realtek></realtek></enhanced></enhanced></enhanced></enhanced></thermal></sleep></power></isa></pci-isa></network></acpi></acpi></rtl8251></mii></realtek></acpi></acpi></rtl8251></mii></realtek></acpi></acpi></acpi></intel></encrypt>

stephenw10

If you're able to connect using:

cu -s 115200 -l cuaU0.0

And you type AT and get anything back you are probably doing the right thing.

It looks likely you just need the right init string.

I think you left out the directory listing for /dev/cua*

Can we see a screenshot of your settings for ppp0?

Steve

theHubi

https://imgur.com/a/YQMHO

Or
ppp01:

ppp02:

–--
I figured I could shorten it, but oh well.
Here's a full-length usb_device_desc

ugen0.1: <0x8086 XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0300
  bDeviceClass = 0x0009  <hub>bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0003
  bMaxPacketSize0 = 0x0009
  idVendor = 0x0000
  idProduct = 0x0000
  bcdDevice = 0x0100
  iManufacturer = 0x0001  <0x8086>
  iProduct = 0x0002  <xhci root="" hub="">iSerialNumber = 0x0000  <no string="">bNumConfigurations = 0x0001

ugen0.2: <hua wei="" huawei="" mobile="">at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0000  <probed by="" interface="" class="">bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0040
  idVendor = 0x12d1
  idProduct = 0x1001
  bcdDevice = 0x0000
  iManufacturer = 0x0001  <hua wei="">iProduct = 0x0007  <huawei mobile="">iSerialNumber = 0x0000  <no string="">bNumConfigurations = 0x0001

ugen0.3: <vendor 0x1a40="" usb="" 2.0="" hub="">at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (100mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0009  <hub>bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0001
  bMaxPacketSize0 = 0x0040
  idVendor = 0x1a40
  idProduct = 0x0101
  bcdDevice = 0x0111
  iManufacturer = 0x0000  <no string="">iProduct = 0x0001  <usb 2.0="" hub="">iSerialNumber = 0x0000  <no string="">bNumConfigurations = 0x0001

ugen0.4: <generic usb2.0-crw="">at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0000  <probed by="" interface="" class="">bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0040
  idVendor = 0x0bda
  idProduct = 0x0153
  bcdDevice = 0x5713
  iManufacturer = 0x0001  <generic>iProduct = 0x0002  <usb2.0-crw>iSerialNumber = 0x0003  <20120926571200000>
  bNumConfigurations = 0x0001

ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA)

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x00e0  <wireless controller="">bDeviceSubClass = 0x0001
  bDeviceProtocol = 0x0001
  bMaxPacketSize0 = 0x0040
  idVendor = 0x8087
  idProduct = 0x07dc
  bcdDevice = 0x0001
  iManufacturer = 0x0000  <no string="">iProduct = 0x0000  <no string="">iSerialNumber = 0x0000  <no string="">bNumConfigurations = 0x0001</no></no></no></wireless></vendor></usb2.0-crw></generic></probed></generic></no></usb></no></hub></vendor></no></huawei></hua></probed></hua></no></xhci></hub>

And here's a full-length dmesg I just did

Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE-p6 #8 r313908+a5b33c9d1c4(RELENG_2_4): Tue Dec 12 13:51:24 CST 2017
    root@buildbot2.netgate.com:/builder/ce-242/tmp/obj/builder/ce-242/tmp/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Celeron(R) CPU  N3150  @ 1.60GHz (1600.05-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406c3  Family=0x6  Model=0x4c  Stepping=3
  Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x43d8e3bf <sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,movbe,popcnt,tscdlt,aesni,rdrand>AMD Features=0x28100800 <syscall,nx,rdtscp,lm>AMD Features2=0x101 <lahf,prefetch>Structured Extended Features=0x2282 <tscadj,smep,erms,nfpusg>VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 2147483648 (2048 MB)
avail memory = 1929531392 (1840 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <alaska a="" m="" i="">WARNING: L1 data cache covers less APIC IDs than a core
0 < 1
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20170303/tbfadt-748)
ioapic0 <version 2.0="">irqs 0-114 on motherboard
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC" frequency 1600046420 Hz quality 1000
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806834c0, 0) error 1
random: entropy device external interface
wlan: mac acl policy registered
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8065c5a0, 0) error 1
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8065c650, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8065c700, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80683360, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80683410, 0) error 1
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff81158310, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <vt vga="" driver="">on motherboard
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
acpi0: <alaska a="" m="" i="">on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <acpi cpu="">on acpi0
cpu1: <acpi cpu="">on acpi0
cpu2: <acpi cpu="">on acpi0
cpu3: <acpi cpu="">on acpi0
atrtc0: <at realtime="" clock="">port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <at timer="">port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus="">on pcib0
vgapci0: <vga-compatible display="">port 0xf000-0xf03f mem 0x80000000-0x80ffffff,0x90000000-0x9fffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
sdhci_pci0: <intel braswell="" emmc="" 4.5.1="" controller="">mem 0x81516000-0x81516fff irq 16 at device 16.0 on pci0
sdhci_pci0: 1 slot(s) allocated
mmc0: <mmc sd="" bus="">on sdhci_pci0
ahci0: <ahci sata="" controller="">port 0xf060-0xf07f mem 0x81515000-0x815157ff irq 19 at device 19.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <ahci channel="">at channel 0 on ahci0
ahcich1: <ahci channel="">at channel 1 on ahci0
xhci0: <intel braswell="" usb="" 3.0="" controller="">mem 0x81500000-0x8150ffff irq 20 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <encrypt decrypt="">at device 26.0 (no driver attached)
hdac0: <intel (0x2284)="" hda="" controller="">mem 0x81510000-0x81513fff irq 22 at device 27.0 on pci0
pcib1: <acpi pci-pci="" bridge="">at device 28.0 on pci0
pcib1: [GIANT-LOCKED]
pcib2: <acpi pci-pci="" bridge="">at device 28.1 on pci0
pci1: <acpi pci="" bus="">on pcib2
re0: <realtek 8111="" 8168="" b="" c="" cp="" d="" dp="" e="" f="" g="" pcie="" gigabit="" ethernet="">port 0xe000-0xe0ff mem 0x81400000-0x81400fff,0xa0100000-0xa0103fff irq 17 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <mii bus="">on re0
rgephy0: <rtl8251 1000base-t="" media="" interface="">PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 00:01:2e:6f:dc:02
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <acpi pci-pci="" bridge="">at device 28.2 on pci0
pci2: <acpi pci="" bus="">on pcib3
re1: <realtek 8111="" 8168="" b="" c="" cp="" d="" dp="" e="" f="" g="" pcie="" gigabit="" ethernet="">port 0xd000-0xd0ff mem 0x81300000-0x81300fff,0xa0000000-0xa0003fff irq 18 at device 0.0 on pci2
re1: Using 1 MSI-X message
re1: Chip rev. 0x4c000000
re1: MAC rev. 0x00000000
miibus1: <mii bus="">on re1
rgephy1: <rtl8251 1000base-t="" media="" interface="">PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 00:01:2e:6f:dc:03
re1: netmap queues/slots: TX 1/256, RX 1/256
pcib4: <acpi pci-pci="" bridge="">at device 28.3 on pci0
pci3: <acpi pci="" bus="">on pcib4
pci3: <network>at device 0.0 (no driver attached)
isab0: <pci-isa bridge="">at device 31.0 on pci0
isa0: <isa bus="">on isab0
acpi_button0: <power button="">on acpi0
acpi_button1: <sleep button="">on acpi0
acpi_tz0: <thermal zone="">on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc0: cannot reserve I/O port range
uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0
est0: <enhanced speedstep="" frequency="" control="">on cpu0
est1: <enhanced speedstep="" frequency="" control="">on cpu1
est2: <enhanced speedstep="" frequency="" control="">on cpu2
est3: <enhanced speedstep="" frequency="" control="">on cpu3
Timecounters tick every 1.000 msec
nvme cam probe device init
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
mmc0: No compatible cards found on bus
hdacc0: <realtek alc892="" hda="" codec="">at cad 0 on hdac0
hdaa0: <realtek alc892="" audio="" function="" group="">at nid 1 on hdacc0
pcm0: <realtek alc892="" (left="" analog)="">at nid 20 and 24 on hdaa0
pcm1: <realtek alc892="" (left="" digital)="">at nid 30 on hdaa0
hdacc1: <intel (0x2883)="" hda="" codec="">at cad 2 on hdac0
hdaa1: <intel (0x2883)="" audio="" function="" group="">at nid 1 on hdacc1
pcm2: <intel (0x2883)="" (hdmi="" dp="" 8ch)="">at nid 7 on hdaa1
pcm3: <intel (0x2883)="" (hdmi="" dp="" 8ch)="">at nid 5 on hdaa1
pcm4: <intel (0x2883)="" (hdmi="" dp="" 8ch)="">at nid 6 on hdaa1
uhub0: 13 ports with 13 removable, self powered
ugen0.2: <hua wei="" huawei="" mobile="">at usbus0
u3g0 on uhub0
u3g0: <3G Modem> on usbus0
u3g0: Found 3 ports.
umass0 on uhub0
umass0: <usb mass="" storage="">on usbus0
umass1 on uhub0
umass1: <usb mass="" storage="">on usbus0
ugen0.3: <vendor 0x1a40="" usb="" 2.0="" hub="">at usbus0
uhub1 on uhub0
uhub1: <vendor 2="" 9="" 0x1a40="" usb="" 2.0="" hub,="" class="" 0,="" rev="" 2.00="" 1.11,="" addr="">on usbus0
uhub1: 4 ports with 4 removable, self powered
ugen0.4: <generic usb2.0-crw="">at usbus0
umass2 on uhub1
umass2: <bulk-in, bulk-out,="" interface="">on usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <sata ssd="" s9fm02.8="">ACS-3 ATA SATA 3.x device
ada0: Serial Number E7CB0767190B00649215
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 30533MB (62533296 512 byte sectors)
cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0
cd0: <huawei mass="" storage="" 2.31="">Removable CD-ROM SCSI-2 device
cd0: 40.000MB/s transfers
cd0: 29MB (15222 2048 byte sectors)
cd0: quirks=0x10<10_BYTE_ONLY>
da1 at umass-sim2 bus 2 scbus4 target 0 lun 0
da1: <generic- sd="" mmc="" ms="" pro="" 1.00="">Removable Direct Access SPC-2 SCSI device
da1: Serial Number 20120926571200000
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2 <no_6_byte>da0 at umass-sim1 bus 1 scbus3 target 0 lun 0
da0: <huawei sd="" storage="" 2.31="">Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2 <no_6_byte>Trying to mount root from ufs:/dev/gptid/b04e99f9-c615-11e7-9acf-00012e6fdc02 [rw]...
re0: link state changed to DOWN
vlan0: changing name to 're0.21'
re1: link state changed to DOWN
ng0: changing name to 'ppp0'
re1: link state changed to UP
re0: link state changed to UP
re0.21: link state changed to UP
tun1: changing name to 'ovpnc1'
pflog0: promiscuous mode enabled
ovpnc1: link state changed to UP
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
arpresolve: can't allocate llinfo for 85.233.117.73 on re1
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ng0: changing name to 'ppp0'
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ovpnc1: link state changed to DOWN
ovpnc1: link state changed to UP
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ovpnc1: link state changed to DOWN
ovpnc1: link state changed to UP
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0
ovpnc1: link state changed to DOWN
ovpnc1: link state changed to UP
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc="">at usbus0</vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></no_6_byte></huawei></no_6_byte></generic-></huawei></sata></vendor></bulk-in,></generic></vendor></vendor></usb></usb></hua></intel></intel></intel></intel></intel></realtek></realtek></realtek></realtek></enhanced></enhanced></enhanced></enhanced></thermal></sleep></power></isa></pci-isa></network></acpi></acpi></rtl8251></mii></realtek></acpi></acpi></rtl8251></mii></realtek></acpi></acpi></acpi></intel></encrypt></intel></ahci></ahci></ahci></mmc></intel></vga-compatible></acpi></acpi></at></at></acpi></acpi></acpi></acpi></alaska></software></vt></version></alaska></tscadj,smep,erms,nfpusg></lahf,prefetch></syscall,nx,rdtscp,lm></sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,movbe,popcnt,tscdlt,aesni,rdrand></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

AndrewZ

@theHubi:

Mar 14 10:21:40 ppp [opt2_link0] CHAT: The modem responded with "ERROR" to the command "AT&F&C1&D2E0S0=0M1" at ModemCmd: label.

I've explained this here

theHubi

Thank you SO VERY MUCH!

I would've never figured that out.
"Because it has no speaker. Well pfSense beeps every time someone logs in.. nevermind. It was the speaker."

You have saved my day!

P.S: Is there anywhere you can read about how these init strings work? Recommendations?

theHubi

OK. Now this is weird.

I have a second one. Exact same thing.

Same modem, same settings. Only it's not connecting.
Same error.

What I've noticed though: This time I get a response from cuaU0.2 instead of 0.0
I've changed to that, tried, same error.
It's literally the exact same hardware.

AndrewZ

Try to configure the modem part from scratch, i.e. delete everything, reboot, then check and configure.
Changing name means re-connect for me. I'm not FreeBSD expert, but in Linux the fixed name assignment could be achieved by udev rules, here you will need something similar. Worth to try devd.conf ?

it has no speaker

was related to a modem itself, not the box it is plugged in
Here are the basics: https://en.wikipedia.org/wiki/Hayes_command_set

M0 or M		Speaker off, completely silent during dialing	M3 is also common, but different on many brands
M1		Speaker on until remote carrier detected (i.e. until the other modem is heard)
M2		Speaker always on (data sounds are heard after CONNECT)

BTW, E352 is not an "LTE-Modem".

stephenw10

@theHubi:

What I've noticed though: This time I get a response from cuaU0.2 instead of 0.0
I've changed to that, tried, same error.
It's literally the exact same hardware.

Could be a different firmware version but it's probably configured with a different composition, the modem port listed in a different order. Try running at the responding prompt:

at^setport?

Some useful info on that in Andrewz's post he linked earlier.

Steve

AndrewZ

@stephenw10:

Could be a different firmware version

Good point, worth to check. As I recall it was 2 different hw mods of E352, each with it's own fw.

theHubi

@stephenw10:

@theHubi:

What I've noticed though: This time I get a response from cuaU0.2 instead of 0.0
I've changed to that, tried, same error.
It's literally the exact same hardware.

Could be a different firmware version but it's probably configured with a different composition, the modem port listed in a different order. Try running at the responding prompt:
at^setport?
Some useful info on that in Andrewz's post he linked earlier.

Steve

Sadly "AT^SETPORT?" gives me bad English. "COMMAND NOT SUPPORT"

CuaU0.2 leaves the following messages from time to time:

^RSSI: 2
^RSSI: 3
^RSSI: 6
^RSSI: 2
^RSSI: 5

I take it that's normal? So it does do something. Sadly, I don't understand what.
Seems like it changed the channel a few times, but I'm not getting anything else.

EDIT01:
Ok it does not seem to be the string. If I copy the Init String, i get an "OK" as response. Nothing after that, but I'd consider "OK" an acceptable response.

EDIT02:
Just checked /boot/loader.conf, because it kept telling me an error to accept some Intel license agreement (in dmesg).
There I found something that seemed off to me..

hw.usb.no_pf="1"

Might that have anything to do with it? (The second pfsense has the same entry though)

EDIT03:
I just realized something. I figured both sticks are the same. They are not. I'll admit I've never looked that closely, but since there is no sticker on it, it took me until now to realize:
I ran an ATI - Modem: Huawei E122
Revision: 11.009.02.00.55
So it is a different model altogether. Does that change anything?
EDIT04:
I've checked the second computer again. Here's what I noticed/what struck me as odd:

ugen0.2: <hua wei="" huawei="" mobile=""> at usbus0
u3g0 on uhub0
u3g0: <3G Modem> on usbus0
u3g0: Found 3 ports.
umass0 on uhub0
umass0: <usb mass="" storage=""> on usbus0
umass1 on uhub0
umass1: <usb mass="" storage=""> on usbus0
ugen0.3: <vendor 0x1a40="" usb="" 2.0="" hub=""> at usbus0
uhub1 on uhub0
cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0
cd0: <huawei mass="" storage="" 2.31=""> Removable CD-ROM SCSI-2 device
cd0: 40.000MB/s transfers
cd0: 29MB (15222 2048 byte sectors)
cd0: quirks=0x10<10_BYTE_ONLY>

da0 at umass-sim1 bus 1 scbus3 target 0 lun 0
da0: <huawei sd="" storage="" 2.31=""> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2 <no_6_byte>ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0
ugen0.5: <vendor 0x8087="" product="" 0x07dc=""> at usbus0 (disconnected)
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'</vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></vendor></no_6_byte></huawei></huawei></vendor></usb></usb></hua>

It would seem that stick is recognized as modem, mass storage and disk drive.
ugen0.5 looks like it keeps connecting and then disconnecting again
Whatever ng0 is, apparently it keeps changing the name to ppp0 about 15 times in the output.

AndrewZ

OK, let me answer some of your questions.
E122 should generally work. ^SETPORT is not available in the older models, so try AT^U2DIAG? and AT^U2DIAG=?
Otherwise you can try installing usb_modeswitch.
^RSSI: 2, etc is absolutely normal, this is how signal level is reported, it should be a command to switch this off.
ng0: changing name to 'ppp0' is normal as well, but this should occur only once.
Frequent disconnects are usually related to power issues and/or bad cables. Try to use relatively short USB extension cable, 15-20 cm if you have one; plugging the modem into the USB port directly is not always the best choice.

theHubi

Both give me an error, sadly.

The setup is basically this:

PC - NIC01 - WAN
- NIC02 - LAN - SWITCH
- USB01 - Huawei E122 - so, yes it is connected directly.
besides Power and a KVM switch (USB), nothing else is connected.

What would you recommend otherwise? Trying a different USB port?

EDIT01:
Wait.. hang on.. if I copy it instead of typing it, "AT^U2DIAG?" works.
^U2DIAG: 268

AndrewZ

@theHubi:

^U2DIAG: 268

This means M+CD+SD+UI

modem (M)
NAND-flashmemory drive (CD)
microSD-drive (SD)
PC UI interface (UI)

Try AT^U2DIAG=0 to keep modem and PC UI only. Re-insert modem afterwards and see how the ports will be recognized by the OS. Then check which port responds to AT-commands.

If you have a choice - try another USB port.

theHubi

Ok now this is weird.

I've had it working on both machines for a while (changed USB port on the other one and that seemed to work).

Now after a single reboot, it stopped working again.
It went full circle. What is going on?

Edit01:

The first one that was working:
cuaU0.0

Apr 4 08:32:23	ppp		[opt1_link0] LCP: Down event
Apr 4 08:32:23	ppp		[opt1_link0] Link: DOWN event
Apr 4 08:32:23	ppp		[opt1_link0] MODEM: chat script failed
Apr 4 08:32:23	ppp		[opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
Apr 4 08:32:10	ppp		[opt1_link0] Link: reconnection attempt 1

cuaU0.1

Apr 4 08:35:53	ppp		[opt1_link0] Link: reconnection attempt 1 in 3 seconds
Apr 4 08:35:53	ppp		[opt1_link0] LCP: Down event
Apr 4 08:35:53	ppp		[opt1_link0] Link: DOWN event
Apr 4 08:35:53	ppp		[opt1_link0] MODEM: chat script failed
Apr 4 08:35:53	ppp		[opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
Apr 4 08:35:50	php-fpm		/interfaces.php: Starting 3gstats.php on device 'cuaU0.2' for interface 'opt1'

but why cuaU0.2? I just set it to 0.1 ???

cuaU0.2

Apr 4 08:38:17	ppp		[opt1_link0] LCP: Down event
Apr 4 08:38:17	ppp		[opt1_link0] Link: DOWN event
Apr 4 08:38:17	ppp		[opt1_link0] MODEM: chat script failed
Apr 4 08:38:17	ppp		[opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
Apr 4 08:38:16	check_reload_status		updating dyndns opt1
Apr 4 08:38:14	check_reload_status		Restarting ipsec tunnels
Apr 4 08:38:14	php-fpm		/interfaces.php: Starting 3gstats.php on device 'cuaU0.2' for interface 'opt1'

It's like the modem just said: "No. I don't want to any more." and quit.

I'm going to try removing and reconfiguring the PPP settings, but I fear that might not solve the issue.

Edit02:
I don't quite understand why the log says "0.2" on all three of them. Fact is, I've tried all three and none of them want to connect anymore.
I'll try again via SSH if I can get any response from AT, but I'd really appreciate some help understanding this weird behaviour.

Edit03:

cu -s 115200 -l cuaU0.0 - Connected, then does not react to anything, not even ~.
cu -s 115200 -l cuaU0.1 - Connected, does not react to AT, but reacts to ~.
cu -s 115200 -l cuaU0.2 - not Connected, I can type just about anything, but it's going nowhere.

Edit04:
After 8-10 minutes I got a response on cuaU0.2: "unsupported speed 115200"
What on earth broke to cause this?

theHubi

Ok so a second reboot and reconfiguration fixed it for #1.

The second one spits out this:

Apr 4 23:45:15	ppp		process 87668 terminated
Apr 4 23:45:15	ppp		[opt2_link0] Link: Shutdown
Apr 4 23:45:15	ppp		[opt2] Bundle: Shutdown
Apr 4 23:45:14	ppp		waiting for process 87668 to die...
Apr 4 23:45:13	ppp		[opt2] IPV6CP: Close event
Apr 4 23:45:13	ppp		[opt2] IPCP: Close event
Apr 4 23:45:13	ppp		[opt2] IFACE: Close event
Apr 4 23:45:13	ppp		caught fatal signal TERM
Apr 4 23:45:13	ppp		waiting for process 87668 to die...
Apr 4 23:45:12	ppp		[opt2_link0] CHAT: Detected Custom modem.
Apr 4 23:45:12	ppp		[opt2_link0] LCP: LayerStart
Apr 4 23:45:12	ppp		[opt2_link0] LCP: state change Initial --> Starting
Apr 4 23:45:12	ppp		[opt2_link0] LCP: Open event
Apr 4 23:45:12	ppp		[opt2_link0] Link: OPEN event
Apr 4 23:45:12	ppp		[opt2] Bundle: Interface ng0 created
Apr 4 23:45:12	ppp		web: web is not running
Apr 4 23:45:12	ppp		process 77865 terminated
Apr 4 23:45:12	ppp		[opt2_link0] Link: Shutdown
Apr 4 23:45:12	ppp		waiting for process 77865 to die...
Apr 4 23:45:12	ppp		[opt2] Bundle: Shutdown
Apr 4 23:45:11	ppp		[opt2_link0] LCP: Down event
Apr 4 23:45:11	ppp		[opt2_link0] LCP: LayerFinish
Apr 4 23:45:11	ppp		[opt2_link0] LCP: state change Starting --> Initial
Apr 4 23:45:11	ppp		[opt2_link0] LCP: Close event
Apr 4 23:45:11	ppp		[opt2_link0] Link: giving up after 10 reconnection attempts
Apr 4 23:45:11	ppp		[opt2_link0] Link: DOWN event
Apr 4 23:45:11	ppp		[opt2_link0] MODEM: chat script failed
Apr 4 23:45:11	ppp		[opt2_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
Apr 4 23:45:11	ppp		waiting for process 77865 to die...
Apr 4 23:45:11	ppp		process 87668 started, version 5.8 (nobody@pfSense_v2_4_1_amd64-pfSense_v2_4_1-job-01 16:32 21-Oct-2017)

nx.vijay

Hi All,

I am using Pfsense 2.4.3 on protectli volte FW 10001. It has one SIM slot. I inserted the sim to it.. but it is not recognizing it. following are the dmsg logs.

ng0: changing name to 'ppp0'
em0: link state changed to UP
em1: link state changed to UP
pflog0: promiscuous mode enabled
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'
ng0: changing name to 'ppp0'

and PPP logs are below

pr 9 17:36:02 ppp waiting for process 41396 to die…
Apr 9 17:36:02 ppp [opt1] Bundle: Shutdown
Apr 9 17:36:02 ppp [opt1_link0] Link: Shutdown
Apr 9 17:36:02 ppp process 41396 terminated
Apr 9 17:36:03 ppp web: web is not running
Apr 9 17:36:03 ppp [opt1] Bundle: Interface ng0 created
Apr 9 17:36:03 ppp [opt1_link0] Link: OPEN event
Apr 9 17:36:03 ppp [opt1_link0] LCP: Open event
Apr 9 17:36:03 ppp [opt1_link0] LCP: state change Initial –> Starting
Apr 9 17:36:03 ppp [opt1_link0] LCP: LayerStart
Apr 9 17:36:16 ppp [opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
Apr 9 17:36:16 ppp [opt1_link0] MODEM: chat script failed
Apr 9 17:36:17 ppp [opt1_link0] Link: DOWN event
Apr 9 17:36:17 ppp [opt1_link0] LCP: Down event
Apr 9 17:36:17 ppp [opt1_link0] Link: reconnection attempt 1 in 3 seconds
Apr 9 17:36:21 ppp [opt1_link0] Link: reconnection attempt 1
Apr 9 17:36:34 ppp [opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
Apr 9 17:36:34 ppp [opt1_link0] MODEM: chat script failed
Apr 9 17:36:35 ppp [opt1_link0] Link: DOWN event
Apr 9 17:36:35 ppp [opt1_link0] LCP: Down event
Apr 9 17:36:35 ppp [opt1_link0] Link: reconnection attempt 2 in 1 seconds
Apr 9 17:36:37 ppp [opt1_link0] Link: reconnection attempt 2
Apr 9 17:36:52 ppp [opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
Apr 9 17:36:52 ppp [opt1_link0] MODEM: chat script failed
Apr 9 17:36:53 ppp [opt1_link0] Link: DOWN event
Apr 9 17:36:53 ppp [opt1_link0] LCP: Down event
Apr 9 17:36:53 ppp [opt1_link0] Link: reconnection attempt 3 in 4 seconds
Apr 9 17:36:58 ppp [opt1_link0] Link: reconnection attempt 3
Apr 9 17:37:00 ppp Multi-link PPP daemon for FreeBSD
Apr 9 17:37:00 ppp process 81036 started, version 5.8 (nobody@pfSense_v2_4_2_amd64-pfSense_v2_4_2-job-14 18:47 16-Nov-2017)
Apr 9 17:37:00 ppp waiting for process 9503 to die…
Apr 9 17:37:00 ppp caught fatal signal TERM
Apr 9 17:37:00 ppp [opt1] IFACE: Close event
Apr 9 17:37:00 ppp [opt1] IPCP: Close event
Apr 9 17:37:00 ppp [opt1] IPV6CP: Close event
Apr 9 17:37:01 ppp waiting for process 9503 to die…
Apr 9 17:37:02 ppp [opt1] Bundle: Shutdown
Apr 9 17:37:02 ppp [opt1_link0] Link: Shutdown
Apr 9 17:37:02 ppp process 9503 terminated
Apr 9 17:37:02 ppp web: web is not running
Apr 9 17:37:02 ppp [opt1] Bundle: Interface ng0 created
Apr 9 17:37:02 ppp [opt1_link0] Link: OPEN event
Apr 9 17:37:02 ppp [opt1_link0] LCP: Open event
Apr 9 17:37:02 ppp [opt1_link0] LCP: state change Initial –> Starting
Apr 9 17:37:02 ppp [opt1_link0] LCP: LayerStart
Apr 9 17:37:02 ppp [opt1_link0] uu_lock(cuau0): device in use
Apr 9 17:37:02 ppp [opt1_link0] MODEM: Fail to open serial port /dev/cuau0 on speed 115200
Apr 9 17:37:02 ppp [opt1_link0] Link: DOWN event
Apr 9 17:37:02 ppp [opt1_link0] LCP: Down event
Apr 9 17:37:02 ppp [opt1_link0] Link: reconnection attempt 1 in 4 seconds

Any help please.

stephenw10

Are you also using a Huawei E352? Otherwise this should be in a new thread.

It seems likely you are not using that since that has it's own SIM slot. In which case what modem hardware are you using?

Also we are not Protectli support. If you are having a hardware issue with something they supplied you should ask them directly.

Steve

theHubi

Out of curiosity, what does your Init-String look like?

Something along these lines?

AT&F&C1&D2E0S0=0M1

Because according to the information given to me:

M0 or M		Speaker off, completely silent during dialing	M3 is also common, but different on many brands
M1		Speaker on until remote carrier detected (i.e. until the other modem is heard)
M2		Speaker always on (data sounds are heard after CONNECT)

Removing the M1 at the end fixed it for me.