1 WAN to 2 LAN (1 WAN passtrough and 1 DHCP)
Toopax last edited by
Can that be done?
I have a pfSense machine with 3 network cards.
card 1 for WAN comes with a static address (yyy.yyy.yyy.111)
card 2 for WAN passtrough, untouched - seen on the network on this card, as was it the WAN address (yyy.yyy.yyy.111) from card 1
card 3 for LAN, DHCP addresses xxx.xxx.xxx.xxx
Sum up: one WAN address divided up in a WAN passthrough and a DHCP LAN
Thanks in advance.
You could bridge your WAN interface and WAN passthrough interface.