Update to 2.4.3 - no boot
-
Hallo,
i just update my PC Engines ALIX from 2.4.2 to 2.4.3. Everything lookes fine.
But after first reboot the pfSense does not boot. Just hanging on a line it say's "handle_02". Please have a look at the two attachements.Any idea?? Thank You!!
A.
-
After updating to 2.4.3 today (PC Engines APU), I have similar issues. The system tried to reboot but hung in the reboot loop (screen indicating that the system was not ready yet.
This went on for ~ 30 min or so until I powercycled the APU.
I see the boot screen last visible line in my case is the (double echo /boot/config/: -115200 -D
The system does not come up.
-
Just forced the update again like described here https://www.netgate.com/docs/pfsense/sg-4860/reinstall-pfsense.html
Everything workes fine. :)
-
LanceD, you have an APU, not an ALIX.
An ALIX is 32bit only and therefore is stuck at the 2.3.x branch.
-
Just forced the update again like described here https://www.netgate.com/docs/pfsense/sg-4860/reinstall-pfsense.html
Everything workes fine. :)
Did the same. At least the machine works again now.
This was not so nice.
Monitoring logs are lost apparently. However, the config could be salvaged as described above. I still have no idea, why the update failed.
