Suddenly lost WAN connectivity for three hours



  • Hi,

    today I've noticed that I've completely lost all internet connectivity without any special "action" for around three hours. No issues with the ISP neither the PPPoE context went down at any point.

    It all started when suddenly one of my OpenVPN client interfaces (A connection to PIA VPN where some destinations are routed via) went down for a second (openvpnc3).

    Shortly after this I see gateway alarms for the second OpenVPN connection (PIA USA) and my WAN PPPoE gateway (which is a bit strange).

    
    Apr 16 13:56:46 router kernel: ovpnc3: link state changed to DOWN
    Apr 16 13:56:46 router check_reload_status: Reloading filter
    Apr 16 13:56:47 router kernel: ovpnc3: link state changed to UP
    Apr 16 13:56:47 router check_reload_status: rc.newwanip starting ovpnc3
    Apr 16 13:56:48 router php-fpm: /rc.newwanip: rc.newwanip: Info: starting on ovpnc3.
    Apr 16 13:56:48 router php-fpm: /rc.newwanip: rc.newwanip: on (IP address: 10.60.10.6) (interface: PIASWISS[opt6]) (real interface: ovpnc3).
    Apr 16 13:56:48 router php-fpm: /rc.newwanip: IP Address has changed, killing states on former IP Address 10.74.10.6.
    Apr 16 13:56:51 router rc.gateway_alarm[11607]: >>> Gateway alarm: PIAUSA_VPNV4 (Addr:10.20.10.5 Alarm:1 RTT:0ms RTTsd:0ms Loss:100%)
    Apr 16 13:56:51 router check_reload_status: updating dyndns PIAUSA_VPNV4
    Apr 16 13:56:51 router check_reload_status: Restarting ipsec tunnels
    Apr 16 13:56:51 router check_reload_status: Restarting OpenVPN tunnels/interfaces
    Apr 16 13:56:51 router check_reload_status: Reloading filter
    Apr 16 13:56:51 router rc.gateway_alarm[12174]: >>> Gateway alarm: WAN_PPPOE (Addr:217.0.117.220 Alarm:1 RTT:0ms RTTsd:0ms Loss:100%)
    Apr 16 13:56:51 router check_reload_status: updating dyndns WAN_PPPOE
    Apr 16 13:56:51 router check_reload_status: Restarting ipsec tunnels
    Apr 16 13:56:51 router check_reload_status: Restarting OpenVPN tunnels/interfaces
    Apr 16 13:56:51 router check_reload_status: Reloading filter
    Apr 16 13:56:51 router rc.gateway_alarm[12999]: >>> Gateway alarm: PIASWISS_VPNV4 (Addr:10.60.10.5 Alarm:1 RTT:0ms RTTsd:0ms Loss:100%)
    Apr 16 13:56:52 router php-fpm: /rc.openvpn: OpenVPN: One or more OpenVPN tunnel endpoints may have changed its IP. Reloading endpoints that may use PIAUSA_VPNV4.
    Apr 16 13:56:52 router php-fpm: /rc.openvpn: OpenVPN: One or more OpenVPN tunnel endpoints may have changed its IP. Reloading endpoints that may use WAN_PPPOE.
    Apr 16 13:56:56 router php-fpm: /rc.newwanip: Ignoring IPsec reload since there are no tunnels on interface opt6
    Apr 16 13:56:56 router php-fpm: /rc.newwanip: RRD create failed exited with 1, the error is: ERROR: you must define at least one Data Source
    Apr 16 13:56:56 router php-fpm: /rc.newwanip: RRD create failed exited with 1, the error is: ERROR: you must define at least one Data Source
    Apr 16 13:56:56 router php-fpm: /rc.newwanip: Creating rrd update script
    Apr 16 13:56:58 router php-fpm: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 10.74.10.6 ->  10.60.10.6 - Restarting packages.
    Apr 16 13:56:58 router check_reload_status: Starting packages
    Apr 16 13:56:58 router snmpd[92049]: disk_OS_get_disks: adding device 'cd0' to device list
    Apr 16 13:56:58 router snmpd[92049]: disk_OS_get_disks: adding device 'da0' to device list
    Apr 16 13:56:58 router devd: notify_clients: send() failed; dropping unresponsive client
    Apr 16 13:56:59 router php-fpm: /rc.start_packages: Restarting/Starting all packages.
    Apr 16 13:57:00 router check_reload_status: Syncing firewall
    Apr 16 13:57:00 router php-cgi: servicewatchdog_cron.php: Service Watchdog detected service named stopped. Restarting named (Domain Name Service)
    Apr 16 13:57:00 router php-cgi: notify_monitor.php: Message sent to mj@******** OK
    Apr 16 13:57:07 router php-fpm: /rc.newipsecdns: IPSEC: One or more IPsec tunnel endpoints has changed its IP. Refreshing.
    Apr 16 13:57:07 router check_reload_status: Reloading filter
    Apr 16 13:57:27 router ntopng: [mongoose.c:4527] ERROR: set_ports_option: cannot bind to 3000s: Address already in use
    Apr 16 13:57:27 router ntopng: [HTTPserver.cpp:904] ERROR: Unable to start HTTP server (IPv4) on ports 3000s
    Apr 16 13:57:46 router ntopng: [mongoose.c:4527] ERROR: set_ports_option: cannot bind to 3000s: Address already in use
    Apr 16 13:57:46 router ntopng: [HTTPserver.cpp:904] ERROR: Unable to start HTTP server (IPv4) on ports 3000s
    Apr 16 13:57:49 router php-fpm: [pfBlockerNG] Starting cron process.
    Apr 16 13:57:51 router php-fpm: /rc.start_packages: [squid] - squid_resync function call pr:1 bp: rpc:no
    Apr 16 13:57:52 router php-fpm: /rc.start_packages: [squid] Adding cronjobs ...
    Apr 16 13:57:52 router php-fpm: /rc.start_packages: [squid] Adding freshclam cronjob.
    Apr 16 13:57:52 router php-fpm: /rc.start_packages: [squid] Google Safe Browsing is disabled. Removing safebrowsing.c[lv]d definitions.
    Apr 16 13:57:52 router php-fpm: /rc.start_packages: [squid] Creating 'clamd.sh' rc script.
    Apr 16 13:57:52 router php-fpm: /rc.start_packages: [squid] Reloading ClamAV...
    Apr 16 13:57:52 router php-fpm: /rc.start_packages: [squid] Reloading C-ICAP...
    Apr 16 13:57:52 router php-fpm: /rc.start_packages: [squid] Stopping any running proxy monitors
    Apr 16 13:57:53 router php-fpm: /rc.start_packages: [squid] Reloading for configuration sync...
    Apr 16 13:57:54 router php-fpm: /rc.start_packages: [squid] Starting a proxy monitor script
    Apr 16 13:57:55 router check_reload_status: Reloading filter
    Apr 16 13:57:57 router php-fpm: /rc.start_packages: [squid] - squid_resync function call pr:1 bp: rpc:no
    Apr 16 13:57:57 router php-fpm: /rc.start_packages: [squid] Adding cronjobs ...
    Apr 16 13:57:57 router php-fpm: /rc.start_packages: [squid] Adding freshclam cronjob.
    Apr 16 13:57:57 router check_reload_status: Syncing firewall
    Apr 16 13:57:57 router php-fpm: /rc.start_packages: [squid] Google Safe Browsing is disabled. Removing safebrowsing.c[lv]d definitions.
    Apr 16 13:57:57 router php-fpm: /rc.start_packages: [squid] Creating 'clamd.sh' rc script.
    Apr 16 13:57:57 router php-fpm: /rc.start_packages: [squid] Reloading ClamAV...
    Apr 16 13:57:57 router php-fpm: /rc.start_packages: [squid] Reloading C-ICAP...
    Apr 16 13:57:57 router php-fpm: /rc.start_packages: [squid] Stopping any running proxy monitors
    Apr 16 13:57:58 router php-fpm: /rc.start_packages: [squid] Reloading for configuration sync...
    Apr 16 13:57:59 router php-fpm: /rc.start_packages: [squid] Starting a proxy monitor script
    Apr 16 13:58:00 router check_reload_status: Reloading filter
    Apr 16 13:58:00 router php-fpm: /rc.start_packages: [lightsquid] Loaded default '/usr/local/etc/lightsquid/lightsquid.cfg.sample' configuration file.
    Apr 16 13:58:00 router php-fpm: /rc.start_packages: [lightsquid] Successfully created '/usr/local/etc/lightsquid/lightsquid.cfg' configuration file.
    Apr 16 13:58:00 router php-fpm: /rc.start_packages: [lightsquid] Removing old cronjobs...
    Apr 16 13:58:00 router check_reload_status: Syncing firewall
    Apr 16 13:58:00 router check_reload_status: Syncing firewall
    Apr 16 13:58:00 router php-fpm: /rc.start_packages: [lightsquid] Updating cronjobs...
    Apr 16 13:58:20 router kernel: pid 98771 (ntopng), uid 0: exited on signal 11 (core dumped)
    Apr 16 13:58:20 router kernel: pppoe0: promiscuous mode disabled
    Apr 16 13:59:00 router php-cgi: servicewatchdog_cron.php: Service Watchdog detected service ntopng stopped. Restarting ntopng (ntopng Network Traffic Monitor)
    Apr 16 13:59:00 router php-cgi: notify_monitor.php: Message sent to mj@******** OK
    Apr 16 13:59:02 router kernel: pppoe0: promiscuous mode enabled
    Apr 16 14:00:00 router snort[42029]: invalid appid in appStatRecord (653)
    Apr 16 14:09:25 router php: [pfBlockerNG] Starting cron process.
    Apr 16 14:19:36 router snort[41847]: [1:2404057:4963] ET CNC Shadowserver Reported CnC Server UDP group 29 [Classification: A Network Trojan was Detected] [Priority: 1] {UDP} 10.0.1.200:6881 -> 5.135.186.30:51413
    Apr 16 14:22:45 router php: [pfBlockerNG] No changes to Firewall rules, skipping Filter Reload
    
    

    From here on all internet connectivity was broken. I've started my emergency router after 1 hour (I was not home and could not remote into my network due to the lost connectivity), but it was not able to bring the PPPoE up (as PfSense still hat the WAN connection up from the PPPoE point of view, my ISP allows only one concurrent connection).

    After around 3 hours the connectivity suddenly was working again, here are the log events. Again it started with an event "ovpnc3 link state DOWN":

    
    Apr 16 17:15:55 router kernel: ovpnc3: link state changed to DOWN
    Apr 16 17:15:55 router check_reload_status: Reloading filter
    Apr 16 17:15:56 router kernel: ovpnc3: link state changed to UP
    Apr 16 17:15:56 router check_reload_status: rc.newwanip starting ovpnc3
    Apr 16 17:15:57 router php-fpm: /rc.newwanip: rc.newwanip: Info: starting on ovpnc3.
    Apr 16 17:15:57 router php-fpm: /rc.newwanip: rc.newwanip: on (IP address: 10.30.10.10) (interface: PIASWISS[opt6]) (real interface: ovpnc3).
    Apr 16 17:15:57 router php-fpm: /rc.newwanip: IP Address has changed, killing states on former IP Address 10.60.10.6.
    Apr 16 17:16:00 router rc.gateway_alarm[19430]: >>> Gateway alarm: WAN_PPPOE (Addr:217.0.117.220 Alarm:1 RTT:0ms RTTsd:0ms Loss:100%)
    Apr 16 17:16:00 router check_reload_status: updating dyndns WAN_PPPOE
    Apr 16 17:16:00 router check_reload_status: Restarting ipsec tunnels
    Apr 16 17:16:00 router check_reload_status: Restarting OpenVPN tunnels/interfaces
    Apr 16 17:16:00 router check_reload_status: Reloading filter
    Apr 16 17:16:00 router rc.gateway_alarm[20178]: >>> Gateway alarm: PIAUSA_VPNV4 (Addr:10.20.10.5 Alarm:1 RTT:0ms RTTsd:0ms Loss:100%)
    Apr 16 17:16:00 router check_reload_status: updating dyndns PIAUSA_VPNV4
    Apr 16 17:16:00 router check_reload_status: Restarting ipsec tunnels
    Apr 16 17:16:00 router check_reload_status: Restarting OpenVPN tunnels/interfaces
    Apr 16 17:16:00 router check_reload_status: Reloading filter
    Apr 16 17:16:00 router rc.gateway_alarm[20883]: >>> Gateway alarm: PIASWISS_VPNV4 (Addr:10.30.10.9 Alarm:1 RTT:0ms RTTsd:0ms Loss:100%)
    Apr 16 17:16:00 router php-cgi: servicewatchdog_cron.php: Service Watchdog detected service unbound stopped. Restarting unbound (DNS Resolver)
    Apr 16 17:16:00 router php-cgi: notify_monitor.php: Message sent to mj@******** OK
    Apr 16 17:16:01 router php-fpm: /rc.openvpn: OpenVPN: One or more OpenVPN tunnel endpoints may have changed its IP. Reloading endpoints that may use WAN_PPPOE.
    Apr 16 17:16:01 router php-fpm: /rc.openvpn: OpenVPN: One or more OpenVPN tunnel endpoints may have changed its IP. Reloading endpoints that may use PIAUSA_VPNV4.
    Apr 16 17:16:01 router php-cgi: servicewatchdog_cron.php: The command '/usr/local/sbin/unbound -c /var/unbound/unbound.conf' returned exit code '1', the output was '[1523891761] unbound[38632:0] error: bind: address already in use [1523891761] unbound[38632:0] fatal error: could not open ports' 
    Apr 16 17:16:01 router php-fpm: /rc.newwanip: Ignoring IPsec reload since there are no tunnels on interface opt6
    Apr 16 17:16:01 router php-fpm: /rc.newwanip: RRD create failed exited with 1, the error is: ERROR: you must define at least one Data Source
    Apr 16 17:16:01 router php-fpm: /rc.newwanip: RRD create failed exited with 1, the error is: ERROR: you must define at least one Data Source
    Apr 16 17:16:01 router php-fpm: /rc.newwanip: Creating rrd update script
    Apr 16 17:16:03 router php-fpm: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 10.60.10.6 ->  10.30.10.10 - Restarting packages.
    Apr 16 17:16:03 router check_reload_status: Starting packages
    Apr 16 17:16:03 router snmpd[11904]: disk_OS_get_disks: adding device 'cd0' to device list
    Apr 16 17:16:03 router devd: notify_clients: send() failed; dropping unresponsive client
    Apr 16 17:16:03 router snmpd[11904]: disk_OS_get_disks: adding device 'da0' to device list
    Apr 16 17:16:04 router php-fpm: /rc.start_packages: Restarting/Starting all packages.
    Apr 16 17:16:05 router check_reload_status: Syncing firewall
    Apr 16 17:16:16 router php-fpm[62340]: /rc.newipsecdns: IPSEC: One or more IPsec tunnel endpoints has changed its IP. Refreshing.
    Apr 16 17:16:16 router check_reload_status: Reloading filter
    Apr 16 17:16:31 router ntopng: [mongoose.c:4527] ERROR: set_ports_option: cannot bind to 3000s: Address already in use
    Apr 16 17:16:31 router ntopng: [HTTPserver.cpp:904] ERROR: Unable to start HTTP server (IPv4) on ports 3000s
    Apr 16 17:16:51 router ntopng: [mongoose.c:4527] ERROR: set_ports_option: cannot bind to 3000s: Address already in use
    Apr 16 17:16:51 router ntopng: [HTTPserver.cpp:904] ERROR: Unable to start HTTP server (IPv4) on ports 3000s
    Apr 16 17:16:54 router php-fpm: [pfBlockerNG] Starting cron process.
    Apr 16 17:16:54 router php-fpm: /rc.start_packages: [squid] - squid_resync function call pr:1 bp: rpc:no
    Apr 16 17:16:55 router php-fpm: /rc.start_packages: [squid] Adding cronjobs ...
    Apr 16 17:16:55 router php-fpm: /rc.start_packages: [squid] Adding freshclam cronjob.
    Apr 16 17:16:55 router check_reload_status: Syncing firewall
    Apr 16 17:16:55 router php-fpm: /rc.start_packages: [squid] Google Safe Browsing is disabled. Removing safebrowsing.c[lv]d definitions.
    Apr 16 17:16:55 router php-fpm: /rc.start_packages: [squid] Creating 'clamd.sh' rc script.
    Apr 16 17:16:55 router php-fpm: /rc.start_packages: [squid] Reloading ClamAV...
    Apr 16 17:16:55 router php-fpm: /rc.start_packages: [squid] Reloading C-ICAP...
    Apr 16 17:16:55 router php-fpm: /rc.start_packages: [squid] Stopping any running proxy monitors
    Apr 16 17:16:56 router php-fpm: /rc.start_packages: [squid] Reloading for configuration sync...
    Apr 16 17:16:56 router php-fpm: /rc.start_packages: [squid] Starting a proxy monitor script
    Apr 16 17:16:57 router check_reload_status: Reloading filter
    Apr 16 17:16:58 router php-fpm: /rc.start_packages: [squid] - squid_resync function call pr:1 bp: rpc:no
    Apr 16 17:16:58 router php-fpm: /rc.start_packages: [squid] Adding cronjobs ...
    Apr 16 17:16:58 router php-fpm: /rc.start_packages: [squid] Adding freshclam cronjob.
    Apr 16 17:16:58 router check_reload_status: Syncing firewall
    Apr 16 17:16:58 router php-fpm: /rc.start_packages: [squid] Google Safe Browsing is disabled. Removing safebrowsing.c[lv]d definitions.
    Apr 16 17:16:58 router php-fpm: /rc.start_packages: [squid] Creating 'clamd.sh' rc script.
    Apr 16 17:16:58 router php-fpm: /rc.start_packages: [squid] Reloading ClamAV...
    Apr 16 17:16:58 router php-fpm: /rc.start_packages: [squid] Reloading C-ICAP...
    Apr 16 17:16:58 router php-fpm: /rc.start_packages: [squid] Stopping any running proxy monitors
    Apr 16 17:16:59 router php-fpm: /rc.start_packages: [squid] Reloading for configuration sync...
    Apr 16 17:16:59 router php-fpm: /rc.start_packages: [squid] Starting a proxy monitor script
    Apr 16 17:17:00 router check_reload_status: Reloading filter
    Apr 16 17:17:00 router php-fpm: /rc.start_packages: [lightsquid] Loaded default '/usr/local/etc/lightsquid/lightsquid.cfg.sample' configuration file.
    Apr 16 17:17:00 router php-fpm: /rc.start_packages: [lightsquid] Successfully created '/usr/local/etc/lightsquid/lightsquid.cfg' configuration file.
    Apr 16 17:17:00 router php-fpm: /rc.start_packages: [lightsquid] Removing old cronjobs...
    Apr 16 17:17:01 router check_reload_status: Syncing firewall
    Apr 16 17:17:01 router check_reload_status: Syncing firewall
    Apr 16 17:17:01 router php-fpm: /rc.start_packages: [lightsquid] Updating cronjobs...
    Apr 16 17:17:48 router kernel: pid 64639 (ntopng), uid 0: exited on signal 11 (core dumped)
    Apr 16 17:17:48 router kernel: pppoe0: promiscuous mode disabled
    Apr 16 17:18:00 router php-cgi: servicewatchdog_cron.php: Service Watchdog detected service ntopng stopped. Restarting ntopng (ntopng Network Traffic Monitor)
    Apr 16 17:18:00 router php-cgi: notify_monitor.php: Message sent to mj@******** OK
    Apr 16 17:18:02 router kernel: pppoe0: promiscuous mode enabled
    Apr 16 17:18:19 router kernel: ovpnc2: link state changed to DOWN
    Apr 16 17:18:19 router check_reload_status: Reloading filter
    Apr 16 17:18:20 router kernel: ovpnc2: link state changed to UP
    Apr 16 17:18:20 router check_reload_status: rc.newwanip starting ovpnc2
    Apr 16 17:18:21 router php-fpm: /rc.newwanip: rc.newwanip: Info: starting on ovpnc2.
    Apr 16 17:18:21 router php-fpm: /rc.newwanip: rc.newwanip: on (IP address: 10.61.10.6) (interface: PIAUSA[opt5]) (real interface: ovpnc2).
    Apr 16 17:18:21 router php-fpm: /rc.newwanip: IP Address has changed, killing states on former IP Address 10.20.10.6.
    Apr 16 17:18:23 router rc.gateway_alarm[92216]: >>> Gateway alarm: WAN_PPPOE (Addr:217.0.117.220 Alarm:1 RTT:0ms RTTsd:0ms Loss:100%)
    Apr 16 17:18:23 router rc.gateway_alarm[92605]: >>> Gateway alarm: PIAUSA_VPNV4 (Addr:10.61.10.5 Alarm:1 RTT:0ms RTTsd:0ms Loss:100%)
    Apr 16 17:18:23 router rc.gateway_alarm[92533]: >>> Gateway alarm: PIASWISS_VPNV4 (Addr:10.30.10.9 Alarm:1 RTT:0ms RTTsd:0ms Loss:100%)
    Apr 16 17:18:23 router check_reload_status: updating dyndns PIAUSA_VPNV4
    Apr 16 17:18:23 router check_reload_status: Restarting ipsec tunnels
    Apr 16 17:18:23 router check_reload_status: updating dyndns WAN_PPPOE
    Apr 16 17:18:23 router check_reload_status: Restarting OpenVPN tunnels/interfaces
    Apr 16 17:18:23 router check_reload_status: Restarting ipsec tunnels
    Apr 16 17:18:23 router check_reload_status: Reloading filter
    Apr 16 17:18:23 router check_reload_status: Restarting OpenVPN tunnels/interfaces
    Apr 16 17:18:23 router check_reload_status: Reloading filter
    Apr 16 17:18:24 router php-fpm[62340]: /rc.openvpn: OpenVPN: One or more OpenVPN tunnel endpoints may have changed its IP. Reloading endpoints that may use WAN_PPPOE.
    Apr 16 17:18:24 router php-fpm: /rc.openvpn: OpenVPN: One or more OpenVPN tunnel endpoints may have changed its IP. Reloading endpoints that may use PIAUSA_VPNV4.
    Apr 16 17:18:25 router php-fpm: /rc.newwanip: Ignoring IPsec reload since there are no tunnels on interface opt5
    Apr 16 17:18:25 router php-fpm: /rc.newwanip: RRD create failed exited with 1, the error is: ERROR: you must define at least one Data Source
    Apr 16 17:18:25 router php-fpm: /rc.newwanip: RRD create failed exited with 1, the error is: ERROR: you must define at least one Data Source
    Apr 16 17:18:25 router php-fpm: /rc.newwanip: Creating rrd update script
    Apr 16 17:18:27 router php-fpm: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 10.20.10.6 ->  10.61.10.6 - Restarting packages.
    Apr 16 17:18:27 router check_reload_status: Starting packages
    Apr 16 17:18:27 router snmpd[66992]: disk_OS_get_disks: adding device 'cd0' to device list
    Apr 16 17:18:27 router devd: notify_clients: send() failed; dropping unresponsive client
    Apr 16 17:18:27 router snmpd[66992]: disk_OS_get_disks: adding device 'da0' to device list
    Apr 16 17:18:28 router php-fpm: /rc.start_packages: Restarting/Starting all packages.
    Apr 16 17:18:28 router check_reload_status: Syncing firewall
    Apr 16 17:18:39 router php-fpm: /rc.newipsecdns: IPSEC: One or more IPsec tunnel endpoints has changed its IP. Refreshing.
    Apr 16 17:18:39 router check_reload_status: Reloading filter
    Apr 16 17:18:55 router ntopng: [mongoose.c:4527] ERROR: set_ports_option: cannot bind to 3000s: Address already in use
    Apr 16 17:18:55 router ntopng: [HTTPserver.cpp:904] ERROR: Unable to start HTTP server (IPv4) on ports 3000s
    Apr 16 17:19:15 router ntopng: [mongoose.c:4527] ERROR: set_ports_option: cannot bind to 3000s: Address already in use
    Apr 16 17:19:15 router ntopng: [HTTPserver.cpp:904] ERROR: Unable to start HTTP server (IPv4) on ports 3000s
    Apr 16 17:19:18 router php-fpm: [pfBlockerNG] Starting cron process.
    Apr 16 17:19:18 router php-fpm: /rc.start_packages: [squid] - squid_resync function call pr:1 bp: rpc:no
    Apr 16 17:19:19 router php-fpm: /rc.start_packages: [squid] Adding cronjobs ...
    Apr 16 17:19:19 router php-fpm: /rc.start_packages: [squid] Adding freshclam cronjob.
    Apr 16 17:19:19 router check_reload_status: Syncing firewall
    Apr 16 17:19:19 router php-fpm: /rc.start_packages: [squid] Google Safe Browsing is disabled. Removing safebrowsing.c[lv]d definitions.
    Apr 16 17:19:19 router php-fpm: /rc.start_packages: [squid] Creating 'clamd.sh' rc script.
    Apr 16 17:19:19 router php-fpm: /rc.start_packages: [squid] Reloading ClamAV...
    Apr 16 17:19:19 router php-fpm: /rc.start_packages: [squid] Reloading C-ICAP...
    Apr 16 17:19:19 router php-fpm: /rc.start_packages: [squid] Stopping any running proxy monitors
    Apr 16 17:19:20 router php-fpm: /rc.start_packages: [squid] Reloading for configuration sync...
    Apr 16 17:19:20 router php-fpm: /rc.start_packages: [squid] Starting a proxy monitor script
    Apr 16 17:19:21 router check_reload_status: Reloading filter
    Apr 16 17:19:21 router php-fpm: /rc.start_packages: [squid] - squid_resync function call pr:1 bp: rpc:no
    Apr 16 17:19:22 router php-fpm: /rc.start_packages: [squid] Adding cronjobs ...
    Apr 16 17:19:22 router php-fpm: /rc.start_packages: [squid] Adding freshclam cronjob.
    Apr 16 17:19:22 router check_reload_status: Syncing firewall
    Apr 16 17:19:22 router php-fpm: /rc.start_packages: [squid] Google Safe Browsing is disabled. Removing safebrowsing.c[lv]d definitions.
    Apr 16 17:19:22 router php-fpm: /rc.start_packages: [squid] Creating 'clamd.sh' rc script.
    Apr 16 17:19:22 router php-fpm: /rc.start_packages: [squid] Reloading ClamAV...
    Apr 16 17:19:22 router php-fpm: /rc.start_packages: [squid] Reloading C-ICAP...
    Apr 16 17:19:22 router php-fpm: /rc.start_packages: [squid] Stopping any running proxy monitors
    Apr 16 17:19:23 router php-fpm: /rc.start_packages: [squid] Reloading for configuration sync...
    Apr 16 17:19:23 router php-fpm: /rc.start_packages: [squid] Starting a proxy monitor script
    Apr 16 17:19:24 router check_reload_status: Reloading filter
    Apr 16 17:19:24 router php-fpm: /rc.start_packages: [lightsquid] Loaded default '/usr/local/etc/lightsquid/lightsquid.cfg.sample' configuration file.
    Apr 16 17:19:24 router php-fpm: /rc.start_packages: [lightsquid] Successfully created '/usr/local/etc/lightsquid/lightsquid.cfg' configuration file.
    Apr 16 17:19:24 router php-fpm: /rc.start_packages: [lightsquid] Removing old cronjobs...
    Apr 16 17:19:24 router check_reload_status: Syncing firewall
    Apr 16 17:19:25 router check_reload_status: Syncing firewall
    Apr 16 17:19:25 router php-fpm: /rc.start_packages: [lightsquid] Updating cronjobs...
    
    

    Any ideas what I maybe have configured in a wrong way before I file a bug in redmine? How can it be that a change / connectivity issue of a OpenVPN client interface affects my main WAN interface?

    Thanks for any suggestions!

    Marco



  • OK, just saw a Tweet from Deutsche Telekom that they had issues with "some" connections with static IP  ::) … Seems the problem was an external one.