Configuration needed in pfsense + l3 + vlan for even internet dsitribution

anagh

I have pfsense + vlan in L3 switch which is working fine

As i have 50 Mbps ILL sometimes some users utilize all the bandwidth while other are getting poor internet

So my requirement is that

for internet users
VLAN 1,2,3 will surely get 10 Mbps and VLAN 4,5 use remaining bandwidth which must be fairly equally distributed among all the users

Also if there is no users in vlan 1,2,3 then the 50 Mbps total bandwidth must be equally distributed between current users.

It is also to be mentioned that all streaming websites access must be within 20 Mbps for all and evenly distributed

Also it must be ensured that all intranet users should connect the locally hosted servers in LAN speed

Please specify the required configuration needed for this either using limiters or traffic shaping

Waiting for valuable reply and any queries

My Current configuration is as below:

I HAVE CONFIGURED 5 VLANS IN OUR L3 SWITCH

L3 configuration:

VLAN DETAILS
VLAN1 192.168.0.0/24 GW 192.168.0.1
VLAN2 192.168.1.0/24 GW 192.168.1.1
VLAN3 192.168.2.0/24 GW 192.168.2.1
VLAN4 192.168.3.0/24 GW 192.168.3.1
VLAN5 192.168.4.0/24 GW 192.168.4.1
VLAN6 192.168.5.0/24 GW 192.168.5.1

Pfsense is connected to untagged port VLAN2 of L3 switch

In L3 switch all vlan are routed to each other

0.0.0.0 is routed through 192.168.1.2(IP of PFSENSE)

Pfsense configuration version using 2.4.3-RELEASE (amd64)

Wan side static ip with gw
Lan side static ip 192.168.1.2 gw 192.168.1.1 i.e pf sense in VLAN 2

In routing static routes
192.168.0.0/24 LANGW - 192.168.1.1 LAN
192.168.2.0/24 LANGW - 192.168.1.1 LAN
192.168.3.0/24 LANGW - 192.168.1.1 LAN
192.168.4.0/24 LANGW - 192.168.1.1 LAN
192.168.5.0/24 LANGW - 192.168.1.1 LAN

In NAT
Automatic outbound NAT rule generation (IPsec pass through included) option is selected which automatically generate NAT rules

On alias named campus are created with range 192.168.0.0/24,192.168.2.0/24,192.168.3.0/24,192.168.4.0/24,192.168.5.0/24 i.e (except pfsense vlan2)

In rules in LAN section rules

From LAN NET to any

From Source alias campus to Destination any

–---------------------------

In PCS we gave ip and gw of corrosponding VLAN segment and DNS is 192.168.1.2(IP of PFSENSE)

Every thing is working fine

anagh

I am now going to follow the guidelines https://forum.pfsense.org/index.php?topic=145255.0