Pear to Pear (Shared Key) Client access Problem

[prabaharan]

Hi All,

I'm new for PFSense. I have done configuration of PFSense server and 2 client places.
Client places connected to server and i can able to ping both clients from server.
But i can't able to ping from Client to another Client. It's is probably  routing issue.
Can any one guide me Please.

Thanks in Advance,
Prabaharan

[NogBadTheBad]

Have you checked the routing in Phase 2 ?

https://doc.pfsense.org/index.php/VPN_Capability_IPsec#Site_to_Site_VPN_Explained

[prabaharan]

Hi,

I have configured OpenVPN pear to pear shared key. client places connected with server. but, client to client can't able to ping.
I know i missed something. May be Routing or mapping something missing. could you please guide me.

I'm ready to give more details if you want.

Server:
Wan : 192.168.1.140
Lan : 192.168.200.1

Client 1:
Wan : 192.168.1.1
Lan : 192.168.51.1

Client 2:
Wan : 192.168.30.1
Lan : 192.168.30.2

Thanks in Advance,
Prabaharan

[NogBadTheBad]

Ah OpenVPN rather than IPsec.

Suggest you look here :-

https://doc.pfsense.org/index.php/OpenVPN_Site_To_Site

It's Peer to Peer BTW :)

[prabaharan]

Thank you for you reply.

I have done this setup.

Client 1:
IPv4 Remote networks: 192.168.200.0/24,192.168.30.0/24

Client 2:
IPv4 Remote networks: 192.168.200.0/24,192.168.51.0/24

but still i can't able to ping from Client 1 to Client 2.

Thanks in Advance,
Prabaharan

[NogBadTheBad]

Firewall rules maybe ?

Firewall on the local clients ?

Do a packet capture the far end Diagnostics -> Packet Capture, is traffic flowing down the tunnel.

I don't actually use OpenVPN, just putting some ideas out there.