Pear to Pear (Shared Key) Client access Problem

prabaharan

Hi All,

I'm new for PFSense. I have done configuration of PFSense server and 2 client places.
Client places connected to server and i can able to ping both clients from server.
But i can't able to ping from Client to another Client. It's is probably routing issue.
Can any one guide me Please.

Thanks in Advance,
Prabaharan

NogBadTheBad

Have you checked the routing in Phase 2 ?

https://doc.pfsense.org/index.php/VPN_Capability_IPsec#Site_to_Site_VPN_Explained

prabaharan

Hi,

I have configured OpenVPN pear to pear shared key. client places connected with server. but, client to client can't able to ping.
I know i missed something. May be Routing or mapping something missing. could you please guide me.

I'm ready to give more details if you want.

Server:
Wan : 192.168.1.140
Lan : 192.168.200.1

Client 1:
Wan : 192.168.1.1
Lan : 192.168.51.1

Client 2:
Wan : 192.168.30.1
Lan : 192.168.30.2

Thanks in Advance,
Prabaharan

NogBadTheBad

Ah OpenVPN rather than IPsec.

Suggest you look here :-

https://doc.pfsense.org/index.php/OpenVPN_Site_To_Site

It's Peer to Peer BTW :)

prabaharan

Thank you for you reply.

I have done this setup.

Client 1:
IPv4 Remote networks: 192.168.200.0/24,192.168.30.0/24

Client 2:
IPv4 Remote networks: 192.168.200.0/24,192.168.51.0/24

but still i can't able to ping from Client 1 to Client 2.

Thanks in Advance,
Prabaharan

NogBadTheBad

Firewall rules maybe ?

Firewall on the local clients ?

Do a packet capture the far end Diagnostics -> Packet Capture, is traffic flowing down the tunnel.

I don't actually use OpenVPN, just putting some ideas out there.