VLAN and PPTP gateway



  • My LAN is 10.10.0.0/16, gateway is 10.10.10.1

    I have created a WAN2_pptp_buffalo interface which points to a StrongVPN server via PPTP. The local address of the interface (as required by PPTP) is 10.10.14.100. The WAN is up according to pfSense status.

    However, if I attempt to set a rule that point to WAN2_pptp_buffalo_PPTP as a gateway, I cannot access the internet. I should mention that I have also tried to set a completely different local IP for WAN2_pptp_buffalo, e.g. 192.168.1.1 (with the intent to use a VLAN). If I do that, the interface goes down.

    What am I doing that is wrong? Any help would be appreciated!
    ![Screenshot 2018-05-21 09.26.44.png](/public/imported_attachments/1/Screenshot 2018-05-21 09.26.44.png)
    ![Screenshot 2018-05-21 09.26.44.png_thumb](/public/imported_attachments/1/Screenshot 2018-05-21 09.26.44.png_thumb)
    ![Screenshot 2018-05-21 09.27.00.png](/public/imported_attachments/1/Screenshot 2018-05-21 09.27.00.png)
    ![Screenshot 2018-05-21 09.27.00.png_thumb](/public/imported_attachments/1/Screenshot 2018-05-21 09.27.00.png_thumb)
    ![Screenshot 2018-05-21 09.30.53.png](/public/imported_attachments/1/Screenshot 2018-05-21 09.30.53.png)
    ![Screenshot 2018-05-21 09.30.53.png_thumb](/public/imported_attachments/1/Screenshot 2018-05-21 09.30.53.png_thumb)
    ![Screenshot 2018-05-21 09.31.16.png](/public/imported_attachments/1/Screenshot 2018-05-21 09.31.16.png)
    ![Screenshot 2018-05-21 09.31.16.png_thumb](/public/imported_attachments/1/Screenshot 2018-05-21 09.31.16.png_thumb)