Squidquard doesn't block anything, what did I miss?

pfrickroll

I tried a few categories in ACL and nothing, then I just deny everything by default and still nothing blocks at all.

Here's the log:
http_port 192.168.20.1:3128
http_port .x.x.x.x:3128
http_port 127.0.0.1:3128 intercept
icp_port 0
digest_generation off
dns_v4_first off
pid_filename /var/run/squid/squid.pid
cache_effective_user squid
cache_effective_group proxy
error_default_language en
icon_directory /usr/local/etc/squid/icons
visible_hostname localhost
cache_mgr admin@localhost
access_log /var/squid/logs/access.log
cache_log /var/squid/logs/cache.log
cache_store_log none
netdb_filename /var/squid/logs/netdb.state
pinger_enable on
pinger_program /usr/local/libexec/squid/pinger

logfile_rotate 0
debug_options rotate=0
shutdown_lifetime 3 seconds

Allow local network(s) on interface(s)

acl localnet src 192.168.20.0/24 x.x.x.x/30
forwarded_for on
uri_whitespace strip

acl dynamic urlpath_regex cgi-bin ?
cache deny dynamic

cache_mem 64 MB
maximum_object_size_in_memory 256 KB
memory_replacement_policy heap GDSF
cache_replacement_policy heap LFUDA
minimum_object_size 0 KB
maximum_object_size 4 MB
cache_dir ufs /var/squid/cache 100 16 256
offline_mode off
cache_swap_low 90
cache_swap_high 95
cache allow all

Add any of your own refresh_pattern entries above these.

refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|?) 0 0% 0
refresh_pattern . 0 20% 4320

#Remote proxies

Setup some default acls

ACLs all, manager, localhost, and to_localhost are predefined.

acl allsrc src all
acl safeports port 21 70 80 210 280 443 488 563 591 631 777 901 3128 3129 1025-65535
acl sslports port 443 563

acl purge method PURGE
acl connect method CONNECT

Define protocols used for redirects

acl HTTP proto HTTP
acl HTTPS proto HTTPS
http_access allow manager localhost

http_access deny manager
http_access allow purge localhost
http_access deny purge
http_access deny !safeports
http_access deny CONNECT !sslports

Always allow localhost connections

http_access allow localhost

request_body_max_size 0 KB
delay_pools 1
delay_class 1 2
delay_parameters 1 -1/-1 -1/-1
delay_initial_bucket_level 100
delay_access 1 allow allsrc

Reverse Proxy settings

Package Integration

url_rewrite_program /usr/local/bin/squidGuard -c /usr/local/etc/squidGuard/squidGuard.conf
url_rewrite_bypass off
url_rewrite_children 16 startup=8 idle=4 concurrency=0

Custom options before auth

acl sglog url_regex -i sgr=ACCESSDENIED
http_access deny sglog

Setup allowed ACLs

Allow local network(s) on interface(s)

http_access allow localnet

Default block all to be sure

http_access deny allsrc

pfrickroll

I just did a proxy check and it says no proxy server detected but everything is turned on my pfsense. I am not sure whats going on, i am on 2.4.2 release.

emammadov

Hi.

Did you enable enable Transparent proxy and SSL filtering? Just in case follow the instructions in the following link.

https://www.howtoforge.com/pfsense-squid-squidguard-traffic-shaping-tutorial