I have 2 pfsense synchronized (CARP )
when I create a Vlan, I have to create it on the 2 PfSense, Master and Slave, but do I put the same ip address for the 2 interface of the Vlan? or I put 2 different ip addresses ?
You have to assign different IPs within the same subnet to each node.
Then assign a CARP VIP to the VLAN on the master as Derelict described here two days ago:
so each Vlan must have a Virtual VIP ?? and different Ip address ?
for example , if the network address of my vlan is : 192.168.1.0/24
I PUT :
Ip address for Pfsense 1 : 192.168.1.1
Ip address for Pfsense 2: 192.168.1.2
VIP : 192.168.1.3
That 's it ? so i have to use 3 address of my network Vlan
Yes, relating to CARP, VLANs behaves like conventional network interfaces.
The VIP has to be a CARP VIP.