Display error on Pfsense 2.4.4 with IPSec IPV4/IPV6



  • Hello,

    I think there is a small display error with IPsec.
    I have an IPSEC VPN that will tunnel both an IPV4 and an IPV6 connection.
    On the dashboard, I see 2 entry when I connect (1 for the IPV4 and 1 for IPV6) :

    IPsec
    Overview Tunnels Mobile
    User IP Status
    XXX 172.Y.Y.Y online
    XXX 1 online

    Problem is the IP for the IPV6 connection : it's just 1 instead of the IPV6 address.
    On the Status/ IPSec / Lease page, host is also 1 for the IPV6 connection.

    Rgds,
    BN


  • Rebel Alliance Developer Netgate

    Can you describe the connection in a bit more detail? Since you copied and pasted that output it removed a lot of the context and formatting.

    Is that for a site to site or a mobile connection? Can you show a screenshot of the widget and status screen? How is your IPsec Phase 1 and Phase 2 configured?

    You can redact some info like complete IP addresses and secrets/keys but we need a lot more info to go on here.



  • Hello,

    Yes, this is a mobile connection. Here the configuration, tell me if you need more :

    3_1533040052008_Capture d’écran 2018-07-31 à 14.13.40.png 2_1533040052008_Capture d’écran 2018-07-31 à 14.13.17.png 1_1533040052008_Capture d’écran 2018-07-31 à 14.12.28.png 0_1533040052008_Capture d’écran 2018-07-31 à 14.12.02.png

    Rgds,
    BN