Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    2 masters

    HA/CARP/VIPs
    2
    4
    556
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • B
      bisssane
      last edited by

      pleaaasse Help !
      I have 2 Pfsense with 3 physical interface: WAN / LAN / CARP
      I have 2 Vlan (vlan 10 and vlan 20). I configure synchronization on all interfaces

      in the PfSense 1 (master):
      LAN: Master
      WAN: Matser
      VLAN10: Matser
      VLAN20: Master

      in the PfSense 2 (Backup):
      LAN: Backup
      WAN: Backup
      VLAN10: Matser
      VLAN20: Master

      For Vlan interface, the 2 Pfsense are Master, but I put the same configuration for vlan and for Wan and LAN. I do not know why it does not work with VLANs

      1 Reply Last reply Reply Quote 0
      • DerelictD
        Derelict LAYER 8 Netgate
        last edited by

        You do not have connectivity between the two nodes on VLAN10 and VLAN20 for the CARP multicast traffic.

        Tag the VLANs through your switching properly.

        Chattanooga, Tennessee, USA
        A comprehensive network diagram is worth 10,000 words and 15 conference calls.
        DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
        Do Not Chat For Help! NO_WAN_EGRESS(TM)

        1 Reply Last reply Reply Quote 0
        • B
          bisssane
          last edited by

          I think there is connectivity between the 2 vlan, because there is the synchonization of DHCP and Firewall Rule (when I apply a rule on the vlan of the Pfsense master, the Pfsense Slave's Vlan synchronizes autumatically)

          1 Reply Last reply Reply Quote 0
          • DerelictD
            Derelict LAYER 8 Netgate
            last edited by

            Then maybe it is just multicast connectivity.

            With both as MASTER you should be able to see the CARP hearbeats from the other node when you capture CARP on VLAN10 or VLAN20. If you only see the hearbeats from the local node you are capturing on, there's your symptom.

            Chattanooga, Tennessee, USA
            A comprehensive network diagram is worth 10,000 words and 15 conference calls.
            DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
            Do Not Chat For Help! NO_WAN_EGRESS(TM)

            1 Reply Last reply Reply Quote 0
            • First post
              Last post
            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.