Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Search
    • Register
    • Login
    Introducing Netgate Nexus: Multi-Instance Management at Your Fingertips.

    Post your pfSense OpenVPN speed, and what hardware you are using.

    Scheduled Pinned Locked Moved Off-Topic & Non-Support Discussion
    4 Posts 3 Posters 1.7k Views 3 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • N
      no_jah
      last edited by no_jah

      I'm thinking of buiding a dedicated pfSense box, and I'm interested in what hardware to us, I want to use as low power as possible without loosing more speed than neccessary

      My current pfSense is a ESXI VM running on a Supermicro X10SLM+-LN4F with Xeon E3-1240 v3 and 32GB RAM
      The pfSense VM uses 4 cores and 4GB RAM, and the only plugin I use is pfBlockerNG.

      My ISP speed is a 150/50Mbit/s cable connection, and when I run Ookia Speedtest without OpenVPN it looks like this:
      alt text

      And when I run Ookia Speedtest over OpenVPN it looks like this, and I'm suprised how little it affects the speed:
      alt text

      1 Reply Last reply
      Reply Quote 0
      • M
        mhab12
        last edited by

        I'm running an SG-4860 at home and get nearly the same throughput as I do without VPN. I don't often have an opportunity to fully saturate the line as we have a 1g symmetric f/o connection from Cox at home. I just tried Speedtest running OpenVPN from work where we have 100m symmetric fiber on TWC and got the following:

        Speedtest on TWC Fiber: 90.8/96.1
        VPN to Cox at home on SG-4860: 84.3/91
        little over 6% overhead/reduction due to VPN

        I think this has more or less held true when I've had access to better bandwidth as well. Have never run into an issue where the 4860 is the bottleneck.

        1 Reply Last reply
        Reply Quote 0
        • N
          no_jah
          last edited by

          Now I've put together a new dedicated pfSense box. I've used the following parts:

          Chassis: Supermicro SC513F-350B
          Motherboard: Supermicro X9SCL-F
          CPU: Xeon e3-1220Lv2
          RAM: 12GB DDR3 ECC, not sure about make or model
          SSD: Kingston SSDNow A400 120GB

          My connection is uppgraded since last time, so now it is: 300/50Mbi/s
          And this is how it looks now.

          Without OpenVPN client:
          alt text

          With OpenVPN client:
          alt text

          When running OpenVPN at full speed the CPU utilation is about 10-12%

          1 Reply Last reply
          Reply Quote 0
          • Kevin45K
            Kevin45
            last edited by

            I am Getting

            Download: 340 MBPS
            Upload: 60 MBPS

            Hardware Specs are

            CPU: 4 Cores
            Ram: 8 GB
            SSD: 500 GB

            My Inernet connection is good and I got more Speed without pfsense openvpn but there is not that much difference.

            1 Reply Last reply
            Reply Quote 0

            Hello! It looks like you're interested in this conversation, but you don't have an account yet.

            Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

            With your input, this post could be even better 💗

            Register Login
            • First post
              Last post
            Copyright 2026 Rubicon Communications LLC (Netgate). All rights reserved.
            Privacy Policy · Cookie Policy