Can i know How to set simple local VOIP(only softphone) in pfsense?



  • Hello! My name is winson
    i already install PFsense and install the packages(freeswitch) and Xlite(softphone) also but i still need to set / configure something right?

    may i know how to set it? (a simple local VOIP in softphone)

    My msn email is winsonkong05@hotmail.com

    i look forward that have somebody can help me….....

    Thanks,



  • @winsonkong05:

    Hello! My name is winson
    i already install PFsense and install the packages(freeswitch) and Xlite(softphone) also but i still need to set / configure something right?

    may i know how to set it? (a simple local VOIP in softphone)

    My msn email is winsonkong05@hotmail.com

    i look forward that have somebody can help me….....

    Thanks,

    Configuring FreeSWITCH on pfSense is simple. You are on the right way.



  • First you want to create the extension after you have done that go to the 'Status' tab and click on 'reloadxml' for it to read the change.

    If you have a static ip for your WAN you can skip this step. If you do not have a static ip then you would want to setup dynamic dns and then set the domain that you chose on the 'Vars' tab. Make sure you have the dynamic dns getting updated with pfsense Services->Dynamic DNS so that the domain stays updated with the right IP Address. Then restart freeswitch so that it uses the new domain name. Then register configure your phone with the dynamic dns domain name. (Remember: by default FreeSWITCH binds to the WAN ip and your phone needs to register to that IP).

    At this point your phone should now be able to register to FreeSWITCH and you can test to make sure it works by dialing *9999 and you should hear music. Dial *5000 to hear the default auto attendant.

    Wiki:  http://doc.pfsense.org/index.php/FreeSWITCH

    IRC:  #pfsense-freeswitch


Log in to reply