Link quality / packet loss command on shell
-
Hi,
there is a command @ the cli to see the gateways and their packet loss in %.
I'm looking for this command.
The netgate support gave me the command some time ago, but I cannot log in into my account @ netgate. :(Can someone help me with the command?
regards.
CAT
-
think your looking for
playback gatewaystatus
This is available from shell/console after you put in 12
12) PHP shell + pfSense tools -
@johnpoz said in Link quality / packet loss command on shell:
playback gatewaystatus
Right!
Thank you!
Exactly what I was looking for.Can I run this command through a shell or only via developer shell?
-
if you ssh to pfsense, you will get the menu - hit 12 and then you can use the command. Off the top of my head not sure if you login with some account via ssh that does not give you the menu, not sure how you can exec the command.
-
It works:
/root: pfSsh.php playback gatewaystatus
Thank you again... :)
-
great! Good info for the next guy for sure.
-
yes. I hope so.
the complete ssh command works too, like:
#ssh -A -p22 root@gateway pfSsh.php playback gatewaystatus
Name Monitor Source Delay StdDev Loss Status
WAN_PPPOE 9.9.9.9 79.227.208.185 24.827ms 0.337ms 0.0% none
