GUI updates won't start Snort /Squid. Console updates work fine. PHP error in Squidguard
-
Hi,
regularly updates via GUI won't start the Packages Snort & Squid(Guard). My workaround is to reboot PfSense. All mentioned packages will start. I recognized that at a reboot a command
"Aug 28 09:52:32 php-fpm 332 /rc.start_packages: Restarting/Starting all packages." is issued.
Update via GUI doesn't have this command.I updated at 9.39 via GUI to the lates snapshot, at 9:52 I rebooted PfSense
Here the Log:
Advanced Log Filter Last 500 General Log Entries. (Maximum 500) Aug 28 09:52:47 sshlockout 57302 sshlockout/webConfigurator v3.0 starting up Aug 28 09:52:47 login login on ttyv0 as root Aug 28 09:52:47 login login on ttyu0 as root Aug 28 09:52:46 check_reload_status Reloading filter Aug 28 09:52:45 php-fpm 332 /rc.start_packages: [squid] Starting a proxy monitor script Aug 28 09:52:44 php-fpm 332 /rc.start_packages: [squid] Reloading for configuration sync... Aug 28 09:52:43 php-fpm 332 /rc.start_packages: [squid] Reloading C-ICAP... Aug 28 09:52:43 php-fpm 332 /rc.start_packages: [squid] Reloading ClamAV... Aug 28 09:52:43 php-fpm 332 /rc.start_packages: [squid] Creating 'clamd.sh' rc script. Aug 28 09:52:43 php-fpm 332 /rc.start_packages: End of configuration backup to https://acb.netgate.com/save (success). Aug 28 09:52:41 kernel igb0: promiscuous mode enabled Aug 28 09:52:37 php-fpm 332 /rc.start_packages: Beginning configuration backup to .https://acb.netgate.com/save Aug 28 09:52:37 check_reload_status Syncing firewall Aug 28 09:52:37 php-fpm 332 /rc.start_packages: [squid] Adding freshclam cronjob. Aug 28 09:52:37 php-fpm 332 /rc.start_packages: [squid] Saved '/usr/local/etc/clamd.conf' configuration file. Aug 28 09:52:37 php-fpm 332 /rc.start_packages: [squid] Saved '/usr/local/etc/freshclam.conf' configuration file. Aug 28 09:52:37 php-fpm 332 /rc.start_packages: [squid] Saved '/usr/local/etc/c-icap/c-icap.magic' configuration file. Aug 28 09:52:37 php-fpm 332 /rc.start_packages: [squid] Saved '/usr/local/etc/c-icap/c-icap.conf' configuration file. Aug 28 09:52:37 php-fpm 332 /rc.start_packages: [squid] Saved '/usr/local/etc/c-icap/squidclamav.conf' configuration file. Aug 28 09:52:37 php-fpm 332 /rc.start_packages: [squid] Loading raw configuration files... Aug 28 09:52:37 php-fpm 332 /rc.start_packages: [squid] Adding cronjobs ... Aug 28 09:52:36 php-fpm 332 /rc.start_packages: [squid] - squid_resync function call pr:1 bp: rpc:no Aug 28 09:52:36 check_reload_status Reloading filter Aug 28 09:52:36 php-fpm 332 /rc.start_packages: [squid] Starting a proxy monitor script Aug 28 09:52:36 php-fpm 332 /rc.start_packages: [squid] Starting service... Aug 28 09:52:35 php-fpm 332 /rc.start_packages: [squid] Starting C-ICAP... Aug 28 09:52:35 php-fpm 332 /rc.start_packages: [squid] Starting ClamAV... Aug 28 09:52:35 php-fpm 332 /rc.start_packages: [squid] Creating 'clamd.sh' rc script. Aug 28 09:52:35 php-fpm 332 /rc.start_packages: End of configuration backup to https://acb.netgate.com/save (success). Aug 28 09:52:34 php-cgi notify_monitor.php: Message sent to xxx@gmail.com OK Aug 28 09:52:33 php-fpm 331 /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'filter' rules. Aug 28 09:52:33 php-fpm 331 /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'pfearly' rules. Aug 28 09:52:33 php-fpm 331 /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'nat' rules. Aug 28 09:52:33 php-fpm 332 /rc.start_packages: Beginning configuration backup to .https://acb.netgate.com/save Aug 28 09:52:33 check_reload_status Syncing firewall Aug 28 09:52:33 php-fpm 332 /rc.start_packages: [squid] Adding freshclam cronjob. Aug 28 09:52:33 php-fpm 332 /rc.start_packages: [squid] Saved '/usr/local/etc/clamd.conf' configuration file. Aug 28 09:52:33 php-fpm 332 /rc.start_packages: [squid] Saved '/usr/local/etc/freshclam.conf' configuration file. Aug 28 09:52:33 php-fpm 332 /rc.start_packages: [squid] Saved '/usr/local/etc/c-icap/c-icap.magic' configuration file. Aug 28 09:52:33 php-fpm 332 /rc.start_packages: [squid] Saved '/usr/local/etc/c-icap/c-icap.conf' configuration file. Aug 28 09:52:33 php-fpm 332 /rc.start_packages: [squid] Saved '/usr/local/etc/c-icap/squidclamav.conf' configuration file. Aug 28 09:52:33 php-fpm 332 /rc.start_packages: [squid] Loading raw configuration files... Aug 28 09:52:33 php-fpm 332 /rc.start_packages: [squid] Adding cronjobs ... Aug 28 09:52:32 php-fpm 332 /rc.start_packages: [squid] - squid_resync function call pr: bp: rpc:no Aug 28 09:52:32 SnortStartup 7446 Snort START for WAN(9530_igb0)... Aug 28 09:52:32 php-fpm 332 /rc.start_packages: Restarting/Starting all packages. Aug 28 09:52:32 kernel done. Aug 28 09:52:32 syslogd kernel boot file is /boot/kernel/kernel Aug 28 09:52:32 syslogd exiting on signal 15 Aug 28 09:52:30 root /etc/rc.d/hostid: WARNING: hostid: unable to figure out a UUID from DMI data, generating a new one Aug 28 09:52:30 kernel done. Aug 28 09:52:30 php-cgi rc.bootup: Creating rrd update script Aug 28 09:52:28 php-fpm 331 /rc.dyndns.update: phpDynDNS (): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry. Aug 28 09:52:26 php-fpm 331 /rc.dyndns.update: phpDynDNS (iqjet.ddns.net): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry. Aug 28 09:52:26 kernel .done. Aug 28 09:52:25 kernel .. Aug 28 09:52:25 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'filter' rules. Aug 28 09:52:25 kernel . Aug 28 09:52:25 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'pfearly' rules. Aug 28 09:52:25 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'nat' rules. Aug 28 09:52:25 kernel . Aug 28 09:52:25 check_reload_status Updating all dyndns Aug 28 09:52:25 check_reload_status Linkup starting igb1 Aug 28 09:52:25 kernel igb1: link state changed to UP Aug 28 09:52:24 kernel done. Aug 28 09:52:24 php-cgi rc.bootup: NTPD is starting up. Aug 28 09:52:24 kernel done. Aug 28 09:52:23 kernel done. Aug 28 09:52:23 php-cgi rc.bootup: sync unbound done. Aug 28 09:52:23 kernel done. Aug 28 09:52:22 php-fpm 331 /rc.newwanip: The command '/sbin/route delete -host ' returned exit code '64', the output was 'route: destination parameter required route: usage: route [-46dnqtv] command [[modifiers] args]' Aug 28 09:52:22 php-fpm 331 /rc.newwanip: rc.newwanip: on (IP address: 172.16.252.1) (interface: OPENVPN[opt2]) (real interface: ovpns1). Aug 28 09:52:22 php-fpm 331 /rc.newwanip: rc.newwanip: Info: starting on ovpns1. Aug 28 09:52:22 php-fpm 332 /rc.newwanip: The command '/sbin/route delete -host ' returned exit code '64', the output was 'route: destination parameter required route: usage: route [-46dnqtv] command [[modifiers] args]' Aug 28 09:52:22 php-fpm 332 /rc.newwanip: rc.newwanip: on (IP address: xxx-xxx.xxx.xxx) (interface: WAN[wan]) (real interface: igb0). Aug 28 09:52:22 php-fpm 332 /rc.newwanip: rc.newwanip: Info: starting on igb0. Aug 28 09:52:21 kernel done. Aug 28 09:52:21 php-cgi rc.bootup: Gateway, none 'available' for inet6, use the first one configured. '' Aug 28 09:52:21 php-cgi rc.bootup: Default gateway setting Interface WAN_DHCP Gateway as default. Aug 28 09:52:21 kernel done. Aug 28 09:52:21 kernel .done. Aug 28 09:52:21 kernel .. Aug 28 09:52:21 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'filter' rules. Aug 28 09:52:21 kernel . Aug 28 09:52:21 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'pfearly' rules. Aug 28 09:52:21 kernel . Aug 28 09:52:21 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'nat' rules. Aug 28 09:52:21 kernel pflog0: promiscuous mode enabled Aug 28 09:52:21 check_reload_status rc.newwanip starting ovpns1 Aug 28 09:52:21 php-cgi rc.bootup: The command '/sbin/route delete -host ' returned exit code '64', the output was 'route: destination parameter required route: usage: route [-46dnqtv] command [[modifiers] args]' Aug 28 09:52:21 kernel ovpns1: link state changed to UP Aug 28 09:52:21 kernel tun1: changing name to 'ovpns1' Aug 28 09:52:21 php-cgi rc.bootup: Resyncing OpenVPN instances. Aug 28 09:52:21 check_reload_status rc.newwanip starting igb0 Aug 28 09:52:21 check_reload_status Linkup starting igb0 Aug 28 09:52:21 kernel igb0: link state changed to UP Aug 28 09:52:16 kernel coretemp3: <CPU On-Die Thermal Sensors> on cpu3 Aug 28 09:52:16 kernel coretemp2: <CPU On-Die Thermal Sensors> on cpu2 Aug 28 09:52:16 kernel coretemp1: <CPU On-Die Thermal Sensors> on cpu1 Aug 28 09:52:16 kernel coretemp0: <CPU On-Die Thermal Sensors> on cpu0 Aug 28 09:52:16 kernel aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard Aug 28 09:52:16 kernel padlock0: No ACE support. Aug 28 09:52:16 kernel TSC: P-state invariant, performance statistics Aug 28 09:52:16 kernel VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID Aug 28 09:52:16 kernel XSAVE Features=0x1<XSAVEOPT> Aug 28 09:52:16 kernel Structured Extended Features3=0x9c000000<IBPB,STIBP,SSBD> Aug 28 09:52:16 kernel Structured Extended Features=0x21c27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE> Aug 28 09:52:16 kernel AMD Features2=0x121<LAHF,ABM,Prefetch> Aug 28 09:52:16 kernel AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> Aug 28 09:52:16 kernel Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> Aug 28 09:52:16 kernel Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Aug 28 09:52:16 kernel Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 Aug 28 09:52:16 kernel CPU: Intel(R) Core(TM) i5-5250U CPU @ 1.60GHz (1596.34-MHz K8-class CPU) Aug 28 09:52:16 kernel random: unblocking device. Aug 28 09:52:16 kernel Trying to mount root from zfs:zroot/ROOT/default []... Aug 28 09:52:16 kernel ada0: 114473MB (234441648 512 byte sectors) Aug 28 09:52:16 kernel ada0: Command Queueing enabled Aug 28 09:52:16 kernel ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) Aug 28 09:52:16 kernel ada0: Serial Number CVLI251002BZ120B Aug 28 09:52:16 kernel ada0: <INTEL SSDMCEAC120A3 LLGi> ACS-2 ATA SATA 3.x device Aug 28 09:52:16 kernel ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 Aug 28 09:52:16 kernel uhub2: 8 ports with 8 removable, self powered Aug 28 09:52:16 kernel uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1 Aug 28 09:52:16 kernel uhub2 on uhub1 Aug 28 09:52:16 kernel ugen1.2: <vendor 0x8087 product 0x8001> at usbus1 Aug 28 09:52:16 kernel uhid0: <Chicony HP Elite USB Keyboard, class 0/0, rev 1.10/1.21, addr 1> on usbus0 Aug 28 09:52:16 kernel uhid0 on uhub0 Aug 28 09:52:16 kernel kbd2 at ukbd0 Aug 28 09:52:16 kernel ukbd0: <Chicony HP Elite USB Keyboard, class 0/0, rev 1.10/1.21, addr 1> on usbus0 Aug 28 09:52:16 kernel ukbd0 on uhub0 Aug 28 09:52:16 kernel ugen0.2: <Chicony HP Elite USB Keyboard> at usbus0 Aug 28 09:52:16 kernel uhub1: 2 ports with 2 removable, self powered Aug 28 09:52:16 kernel uhub0: 15 ports with 15 removable, self powered Aug 28 09:52:16 kernel uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 Aug 28 09:52:16 kernel uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Aug 28 09:52:16 kernel ugen1.1: <Intel EHCI root HUB> at usbus1 Aug 28 09:52:16 kernel ugen0.1: <0x8086 XHCI root HUB> at usbus0 Aug 28 09:52:16 kernel pcm1: <Realtek ALC662 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25 on hdaa1 Aug 28 09:52:16 kernel hdaa1: No presence detection support at nid 27 Aug 28 09:52:16 kernel hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1 Aug 28 09:52:16 kernel hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1 Aug 28 09:52:16 kernel pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0 Aug 28 09:52:16 kernel hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0 Aug 28 09:52:16 kernel hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0 Aug 28 09:52:16 kernel Timecounters tick every 1.000 msec Aug 28 09:52:16 kernel ZFS storage pool version: features support (5000) Aug 28 09:52:16 kernel ZFS filesystem version: 5 Aug 28 09:52:16 kernel est3: <Enhanced SpeedStep Frequency Control> on cpu3 Aug 28 09:52:16 kernel est2: <Enhanced SpeedStep Frequency Control> on cpu2 Aug 28 09:52:16 kernel est1: <Enhanced SpeedStep Frequency Control> on cpu1 Aug 28 09:52:16 kernel est0: <Enhanced SpeedStep Frequency Control> on cpu0 Aug 28 09:52:16 kernel ppc0: cannot reserve I/O port range Aug 28 09:52:16 kernel atkbd0: [GIANT-LOCKED] Aug 28 09:52:16 kernel kbd0 at atkbd0 Aug 28 09:52:16 kernel atkbd0: <AT Keyboard> irq 1 on atkbdc0 Aug 28 09:52:16 kernel atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Aug 28 09:52:16 kernel uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 Aug 28 09:52:16 kernel uart0: console (115200,n,8,1) Aug 28 09:52:16 kernel uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 Aug 28 09:52:16 kernel acpi_tz1: <Thermal Zone> on acpi0 Aug 28 09:52:16 kernel acpi_tz0: <Thermal Zone> on acpi0 Aug 28 09:52:16 kernel acpi_button1: <Power Button> on acpi0 Aug 28 09:52:16 kernel acpi_button0: <Sleep Button> on acpi0 Aug 28 09:52:16 kernel ahcich0: <AHCI channel> at channel 0 on ahci0 Aug 28 09:52:16 kernel ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported Aug 28 09:52:16 kernel ahci0: <AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7419000-0xf74197ff irq 19 at device 31.2 on pci0 Aug 28 09:52:16 kernel isa0: <ISA bus> on isab0 Aug 28 09:52:16 kernel isab0: <PCI-ISA bridge> at device 31.0 on pci0 Aug 28 09:52:16 kernel usbus1: 480Mbps High Speed USB v2.0 Aug 28 09:52:16 kernel usbus1 on ehci0 Aug 28 09:52:16 kernel usbus1: EHCI version 1.0 Aug 28 09:52:16 kernel ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf741a000-0xf741a3ff irq 23 at device 29.0 on pci0 Aug 28 09:52:16 kernel igb3: netmap queues/slots: TX 2/1024, RX 2/1024 Aug 28 09:52:16 kernel igb3: Bound queue 1 to cpu 3 Aug 28 09:52:16 kernel igb3: Bound queue 0 to cpu 2 Aug 28 09:52:16 kernel igb3: Ethernet address: 00:0e:c4:d4:b5:66 Aug 28 09:52:16 kernel igb3: Using MSIX interrupts with 3 vectors Aug 28 09:52:16 kernel igb3: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xb000-0xb01f mem 0xf7000000-0xf701ffff,0xf7020000-0xf7023fff irq 16 at device 0.0 on pci4 Aug 28 09:52:16 kernel pci4: <ACPI PCI bus> on pcib4 Aug 28 09:52:16 kernel pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 Aug 28 09:52:16 kernel igb2: netmap queues/slots: TX 2/1024, RX 2/1024 Aug 28 09:52:16 kernel igb2: Bound queue 1 to cpu 1 Aug 28 09:52:16 kernel igb2: Bound queue 0 to cpu 0 Aug 28 09:52:16 kernel igb2: Ethernet address: 00:0e:c4:d4:b5:65 Aug 28 09:52:16 kernel igb2: Using MSIX interrupts with 3 vectors Aug 28 09:52:16 kernel igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xc000-0xc01f mem 0xf7100000-0xf711ffff,0xf7120000-0xf7123fff irq 18 at device 0.0 on pci3 Aug 28 09:52:16 kernel pci3: <ACPI PCI bus> on pcib3 Aug 28 09:52:16 kernel pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 Aug 28 09:52:16 kernel igb1: netmap queues/slots: TX 2/1024, RX 2/1024 Aug 28 09:52:16 kernel igb1: Bound queue 1 to cpu 3 Aug 28 09:52:16 kernel igb1: Bound queue 0 to cpu 2 Aug 28 09:52:16 kernel igb1: Ethernet address: 00:0e:c4:d4:b5:64 Aug 28 09:52:16 kernel igb1: Using MSIX interrupts with 3 vectors Aug 28 09:52:16 kernel igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xd000-0xd01f mem 0xf7200000-0xf721ffff,0xf7220000-0xf7223fff irq 17 at device 0.0 on pci2 Aug 28 09:52:16 kernel pci2: <ACPI PCI bus> on pcib2 Aug 28 09:52:16 kernel pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 Aug 28 09:52:16 kernel igb0: netmap queues/slots: TX 2/1024, RX 2/1024 Aug 28 09:52:16 kernel igb0: Bound queue 1 to cpu 1 Aug 28 09:52:16 kernel igb0: Bound queue 0 to cpu 0 Aug 28 09:52:16 kernel igb0: Ethernet address: 00:0e:c4:d4:b5:63 Aug 28 09:52:16 kernel igb0: Using MSIX interrupts with 3 vectors Aug 28 09:52:16 kernel igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe000-0xe01f mem 0xf7300000-0xf731ffff,0xf7320000-0xf7323fff irq 16 at device 0.0 on pci1 Aug 28 09:52:16 kernel pci1: <ACPI PCI bus> on pcib1 Aug 28 09:52:16 kernel pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 Aug 28 09:52:16 kernel hdac1: <Intel Broadwell HDA Controller> mem 0xf7410000-0xf7413fff irq 22 at device 27.0 on pci0 Aug 28 09:52:16 kernel pci0: <simple comms> at device 22.0 (no driver attached) Aug 28 09:52:16 kernel usbus0: 5.0Gbps Super Speed USB v3.0 Aug 28 09:52:16 kernel usbus0 on xhci0 Aug 28 09:52:16 kernel xhci0: Port routing mask set to 0xffffffff Aug 28 09:52:16 kernel xhci0: 32 bytes context size, 64-bit DMA Aug 28 09:52:16 kernel xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xf7400000-0xf740ffff irq 21 at device 20.0 on pci0 Aug 28 09:52:16 kernel hdac0: <Intel Broadwell HDA Controller> mem 0xf7414000-0xf7417fff irq 16 at device 3.0 on pci0 Aug 28 09:52:16 kernel vgapci0: Boot video device Aug 28 09:52:16 kernel vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf6000000-0xf6ffffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 Aug 28 09:52:16 kernel pci0: <ACPI PCI bus> on pcib0 Aug 28 09:52:16 kernel pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 Aug 28 09:52:16 kernel acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 Aug 28 09:52:16 kernel Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 Aug 28 09:52:16 kernel Event timer "i8254" frequency 1193182 Hz quality 100 Aug 28 09:52:16 kernel Timecounter "i8254" frequency 1193182 Hz quality 0 Aug 28 09:52:16 kernel attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Aug 28 09:52:16 kernel Event timer "RTC" frequency 32768 Hz quality 0 Aug 28 09:52:16 kernel atrtc0: registered as a time-of-day clock, resolution 1.000000s Aug 28 09:52:16 kernel atrtc0: Warning: Couldn't map I/O. Aug 28 09:52:16 kernel atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 Aug 28 09:52:16 kernel Event timer "HPET4" frequency 14318180 Hz quality 440 Aug 28 09:52:16 kernel Event timer "HPET3" frequency 14318180 Hz quality 440 Aug 28 09:52:16 kernel Event timer "HPET2" frequency 14318180 Hz quality 440 Aug 28 09:52:16 kernel Event timer "HPET1" frequency 14318180 Hz quality 440 Aug 28 09:52:16 kernel Event timer "HPET" frequency 14318180 Hz quality 550 Aug 28 09:52:16 kernel Timecounter "HPET" frequency 14318180 Hz quality 950 Aug 28 09:52:16 kernel hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Aug 28 09:52:16 kernel cpu3: <ACPI CPU> on acpi0 Aug 28 09:52:16 kernel cpu2: <ACPI CPU> on acpi0 Aug 28 09:52:16 kernel cpu1: <ACPI CPU> on acpi0 Aug 28 09:52:16 kernel cpu0: <ACPI CPU> on acpi0 Aug 28 09:52:16 kernel acpi0: Power Button (fixed) Aug 28 09:52:16 kernel acpi0: <ALASKA A M I > on motherboard Aug 28 09:52:16 kernel padlock0: No ACE support. Aug 28 09:52:16 kernel cryptosoft0: <software crypto> on motherboard Aug 28 09:52:16 kernel nexus0 Aug 28 09:52:16 kernel random: fast provider: "Intel Secure Key RNG" Aug 28 09:52:16 kernel random: registering fast source Intel Secure Key RNG Aug 28 09:52:16 kernel module_register_init: MOD_LOAD (vesa, 0xffffffff81209800, 0) error 19 Aug 28 09:52:16 kernel netmap: loaded module Aug 28 09:52:16 kernel kbd1 at kbdmux0 Aug 28 09:52:16 kernel hn: tranparent VF mode, if_transmit will be used, instead of if_start Aug 28 09:52:16 kernel wlan: mac acl policy registered Aug 28 09:52:16 kernel module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806a75c0, 0) error 1 Aug 28 09:52:16 kernel iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. Aug 28 09:52:16 kernel iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. Aug 28 09:52:16 kernel module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806a7510, 0) error 1 Aug 28 09:52:16 kernel iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. Aug 28 09:52:16 kernel iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. Aug 28 09:52:16 kernel module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806a7460, 0) error 1 Aug 28 09:52:16 kernel iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. Aug 28 09:52:16 kernel iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. Aug 28 09:52:16 kernel module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80680590, 0) error 1 Aug 28 09:52:16 kernel ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Aug 28 09:52:16 kernel ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. Aug 28 09:52:16 kernel module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806804e0, 0) error 1 Aug 28 09:52:16 kernel ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Aug 28 09:52:16 kernel ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. Aug 28 09:52:16 kernel random: entropy device external interface Aug 28 09:52:16 kernel module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80680430, 0) error 1 Aug 28 09:52:16 kernel ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Aug 28 09:52:16 kernel ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. Aug 28 09:52:16 kernel Timecounter "TSC" frequency 1596343564 Hz quality 1000 Aug 28 09:52:16 kernel SMP: AP CPU #2 Launched! Aug 28 09:52:16 kernel SMP: AP CPU #3 Launched! Aug 28 09:52:16 kernel SMP: AP CPU #1 Launched! Aug 28 09:52:16 kernel ioapic0 <Version 2.0> irqs 0-39 on motherboard Aug 28 09:52:16 kernel WARNING: Bogus Interrupt Polarity. Assume CONFORMS Aug 28 09:52:16 kernel FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads Aug 28 09:52:16 kernel FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs Aug 28 09:52:16 kernel ACPI APIC Table: <ALASKA A M I > Aug 28 09:52:16 kernel Event timer "LAPIC" quality 600 Aug 28 09:52:16 kernel avail memory = 8162553856 (7784 MB) Aug 28 09:52:16 kernel real memory = 8589934592 (8192 MB) Aug 28 09:52:16 kernel TSC: P-state invariant, performance statistics Aug 28 09:52:16 kernel VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID Aug 28 09:52:16 kernel XSAVE Features=0x1<XSAVEOPT> Aug 28 09:52:16 kernel Structured Extended Features=0x21c27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE> Aug 28 09:52:16 kernel AMD Features2=0x121<LAHF,ABM,Prefetch> Aug 28 09:52:16 kernel AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> Aug 28 09:52:16 kernel Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> Aug 28 09:52:16 kernel Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Aug 28 09:52:16 kernel Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4 Aug 28 09:52:16 kernel CPU: Intel(R) Core(TM) i5-5250U CPU @ 1.60GHz (1596.34-MHz K8-class CPU) Aug 28 09:52:16 kernel VT(efifb): resolution 1280x1024 Aug 28 09:52:16 kernel FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0) Aug 28 09:52:16 kernel root@buildbot3:/builder/crossbuild-ce-master/obj/amd64/FWJoMRHc/builder/crossbuild-ce-master/pfSense/tmp/FreeBSD-src/sys/pfSense amd64 Aug 28 09:52:16 kernel FreeBSD 11.2-RELEASE-p2 #94 b0703dcab3c(RELENG_2_4_4): Mon Aug 27 17:36:36 EDT 2018 Aug 28 09:52:16 kernel FreeBSD is a registered trademark of The FreeBSD Foundation. Aug 28 09:52:16 kernel The Regents of the University of California. All rights reserved. Aug 28 09:52:16 kernel Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Aug 28 09:52:16 kernel Copyright (c) 1992-2018 The FreeBSD Project. Aug 28 09:52:16 syslogd kernel boot file is /boot/kernel/kernel Aug 28 09:51:35 syslogd exiting on signal 15 Aug 28 09:51:35 reboot rebooted by root REMARK: SNORT & SQUIS/SQUIDGUARD manualy started Aug 28 09:51:22 php-fpm 617 /diag_reboot.php: The command '/usr/bin/killall 'squidGuard'' returned exit code '1', the output was 'No matching processes were found' Aug 28 09:51:15 kernel igb0: promiscuous mode disabled Aug 28 09:51:15 snort 61167 *** Caught Term-Signal Aug 28 09:51:14 SnortStartup 74960 Snort STOP for WAN(9530_igb0)... Aug 28 09:51:14 php-fpm 617 /diag_reboot.php: Stopping all packages. Aug 28 09:50:35 snort 61167 [1:2402000:4920] ET DROP Dshield Block Listed Source group 1 [Classification: Misc Attack] [Priority: 2] {TCP} 78.128.112.30:44545 -> xxx-xxx.xxx.xxx:18591 Aug 28 09:49:42 snort 61167 [1:2403396:43058] ET CINS Active Threat Intelligence Poor Reputation IP TCP group 49 [Classification: Misc Attack] [Priority: 2] {TCP} 46.174.191.32:38060 -> xxx-xxx.xxx.xxx:8080 Aug 28 09:49:29 snort 61167 [1:2402000:4920] ET DROP Dshield Block Listed Source group 1 [Classification: Misc Attack] [Priority: 2] {TCP} 185.208.209.70:41599 -> xxx-xxx.xxx.xxx:20217 Aug 28 09:47:49 snort 61167 [1:2402000:4920] ET DROP Dshield Block Listed Source group 1 [Classification: Misc Attack] [Priority: 2] {TCP} 5.188.86.150:49473 -> xxx-xxx.xxx.xxx:3398 Aug 28 09:47:49 snort 61167 [1:2403308:43058] ET CINS Active Threat Intelligence Poor Reputation IP TCP group 5 [Classification: Misc Attack] [Priority: 2] {TCP} 5.188.86.150:49473 -> xxx-xxx.xxx.xxx:3398 Aug 28 09:47:37 snort 61167 [1:2402000:4920] ET DROP Dshield Block Listed Source group 1 [Classification: Misc Attack] [Priority: 2] {TCP} 78.128.112.2:58064 -> xxx-xxx.xxx.xxx:19926 Aug 28 09:47:37 snort 61167 [1:2403460:43058] ET CINS Active Threat Intelligence Poor Reputation IP TCP group 81 [Classification: Misc Attack] [Priority: 2] {TCP} 78.128.112.2:58064 -> xxx-xxx.xxx.xxx:19926 Aug 28 09:46:57 snort 61167 [1:2402000:4920] ET DROP Dshield Block Listed Source group 1 [Classification: Misc Attack] [Priority: 2] {TCP} 78.128.112.82:41541 -> xxx-xxx.xxx.xxx:27332 Aug 28 09:46:57 snort 61167 [1:2403460:43058] ET CINS Active Threat Intelligence Poor Reputation IP TCP group 81 [Classification: Misc Attack] [Priority: 2] {TCP} 78.128.112.82:41541 -> xxx-xxx.xxx.xxx:27332 Aug 28 09:46:53 kernel igb0: promiscuous mode enabled Aug 28 09:46:44 SnortStartup 55457 Snort START for WAN(9530_igb0)... Aug 28 09:40:43 php-fpm 617 /index.php: Successful login for user 'admin' from: 10.16.252.24 (Local Database) Aug 28 09:39:55 login login on ttyu0 as root Aug 28 09:39:55 sshlockout 72083 sshlockout/webConfigurator v3.0 starting up Aug 28 09:39:55 login login on ttyv0 as root Aug 28 09:39:55 php-cgi notify_monitor.php: Message sent to xxx@gmail.com OK Aug 28 09:39:55 php-fpm 618 /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'filter' rules. Aug 28 09:39:55 php-fpm 618 /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'pfearly' rules. Aug 28 09:39:55 php-fpm 618 /rc.filter_configure_sync: [squid] Installed but not started. Not installing 'nat' rules. Aug 28 09:39:54 kernel done. Aug 28 09:39:54 php-fpm 618 /rc.start_packages: Skipping STARTing packages process because previous/another instance is already running Aug 28 09:39:54 kernel done. Aug 28 09:39:54 syslogd kernel boot file is /boot/kernel/kernel Aug 28 09:39:54 syslogd exiting on signal 15 Aug 28 09:39:52 root /etc/rc.d/hostid: WARNING: hostid: unable to figure out a UUID from DMI data, generating a new one Aug 28 09:39:51 kernel done. Aug 28 09:39:51 php-cgi rc.bootup: Creating rrd update script Aug 28 09:39:49 php-fpm 617 /rc.dyndns.update: phpDynDNS (): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry. Aug 28 09:39:48 php-fpm 617 /rc.dyndns.update: phpDynDNS (iqjet.ddns.net): No change in my IP address and/or 25 days has not passed. Not updating dynamic DNS entry. Aug 28 09:39:47 kernel .done. Aug 28 09:39:47 kernel .. Aug 28 09:39:47 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'filter' rules. Aug 28 09:39:47 kernel . Aug 28 09:39:47 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'pfearly' rules. Aug 28 09:39:47 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'nat' rules. Aug 28 09:39:47 kernel . Aug 28 09:39:47 check_reload_status Updating all dyndns Aug 28 09:39:47 dhcpleases kqueue error: unkown Aug 28 09:39:47 check_reload_status Linkup starting igb1 Aug 28 09:39:47 kernel igb1: link state changed to UP Aug 28 09:39:46 kernel done. Aug 28 09:39:46 php-cgi rc.bootup: NTPD is starting up. Aug 28 09:39:46 kernel done. Aug 28 09:39:45 kernel done. Aug 28 09:39:44 php-cgi rc.bootup: sync unbound done. Aug 28 09:39:44 kernel done. Aug 28 09:39:43 kernel done. Aug 28 09:39:43 php-cgi rc.bootup: Gateway, none 'available' for inet6, use the first one configured. '' Aug 28 09:39:43 php-cgi rc.bootup: Default gateway setting Interface WAN_DHCP Gateway as default. Aug 28 09:39:43 kernel done. Aug 28 09:39:43 kernel done. Aug 28 09:39:43 kernel .done. Aug 28 09:39:43 kernel .. Aug 28 09:39:43 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'filter' rules. Aug 28 09:39:43 kernel . Aug 28 09:39:43 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'pfearly' rules. Aug 28 09:39:43 kernel . Aug 28 09:39:43 php-cgi rc.bootup: [squid] Installed but not started. Not installing 'nat' rules. Aug 28 09:39:42 check_reload_status rc.newwanip starting ovpns1 Aug 28 09:39:42 kernel pflog0: promiscuous mode enabled Aug 28 09:39:42 php-cgi rc.bootup: The command '/sbin/route delete -host ' returned exit code '64', the output was 'route: destination parameter required route: usage: route [-46dnqtv] command [[modifiers] args]' Aug 28 09:39:42 kernel ovpns1: link state changed to UP Aug 28 09:39:42 kernel tun1: changing name to 'ovpns1' Aug 28 09:39:42 php-cgi rc.bootup: Resyncing OpenVPN instances. Aug 28 09:39:42 check_reload_status rc.newwanip starting igb0 Aug 28 09:39:42 check_reload_status Linkup starting igb0 Aug 28 09:39:42 kernel igb0: link state changed to UP ug 28 09:39:38 kernel coretemp3: <CPU On-Die Thermal Sensors> on cpu3 Aug 28 09:39:38 kernel coretemp2: <CPU On-Die Thermal Sensors> on cpu2 Aug 28 09:39:38 kernel coretemp1: <CPU On-Die Thermal Sensors> on cpu1 Aug 28 09:39:38 kernel coretemp0: <CPU On-Die Thermal Sensors> on cpu0 Aug 28 09:39:38 kernel aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard Aug 28 09:39:38 kernel padlock0: No ACE support.Also a PHP error in Squidguard
rash report begins. Anonymous machine information: amd64 11.2-RELEASE-p2 FreeBSD 11.2-RELEASE-p2 #94 b0703dcab3c(RELENG_2_4_4): Mon Aug 27 17:36:36 EDT 2018 root@buildbot3:/builder/crossbuild-ce-master/obj/amd64/FWJoMRHc/builder/crossbuild-ce-master/pfSense/tmp/FreeBSD-src/sys/pfSense Crash report details: PHP Errors: [28-Aug-2018 09:52:36 Europe/Berlin] PHP Warning: Use of undefined constant ip2 - assumed 'ip2' (this will throw an Error in a future version of PHP) in /usr/local/pkg/squidguard_configurator.inc on line 1643 [28-Aug-2018 09:52:36 Europe/Berlin] PHP Warning: Use of undefined constant ip1 - assumed 'ip1' (this will throw an Error in a future version of PHP) in /usr/local/pkg/squidguard_configurator.inc on line 1643 [28-Aug-2018 09:52:36 Europe/Berlin] PHP Warning: Use of undefined constant ip2 - assumed 'ip2' (this will throw an Error in a future version of PHP) in /usr/local/pkg/squidguard_configurator.inc on line 1643 [28-Aug-2018 09:52:36 Europe/Berlin] PHP Warning: Use of undefined constant ip1 - assumed 'ip1' (this will throw an Error in a future version of PHP) in /usr/local/pkg/squidguard_configurator.inc on line 1643 No FreeBSD crash data found.Is this update behavior via GUI normal?
How to solve this problem?
How to get rid of this PHP error? -
There is zero difference in an update triggered by the GUI and one triggered from the console. The same process is run in either case.
I just pushed a fix for that squidGuard PHP error though, it was definitely a problem.
