-
Can you please test latest snapshots there were some changes that are backed up now that caused problems.
If still does not work can you provide a log at least from system logs?I will verify the disconnect and other facilities regarding pppoe but connecting to PPPoE should not be a problem.
-
@ermal:
Can you please test latest snapshots there were some changes that are backed up now that caused problems.
If still does not work can you provide a log at least from system logs?I will verify the disconnect and other facilities regarding pppoe but connecting to PPPoE should not be a problem.
Now it disconnects but there is no connect button after. Only way to get connected after that is go to wan interface page and click on save/apply changes.
Why don't we have reconnect button to? And RRD graphs are still missing.Sasa
-
After loosing connection if you go to interfaces tab there is Disconnect button which do nothing but if you write this <https: 192.168.0.254="" status_interfaces.php?action="Connect&if=wan">in address bar and press Enter then connection is established again (well, you need to change IP address).
Sasa</https:>
-
Try next snapshot
-
@ermal:
Try next snapshot
With snapshot pfSense-Full-Update-2.0-ALPHA-ALPHA-20090227-1542.tgz same error ocurres.
I have get myself busy and tried to solve that problem so here it is:
In file /etc/inc/pfsense-utils.inc there is section for pppoe which is responsible for status listing
/* PPPoE interface? -> get status from virtual interface /
case "pppoe":
unset($linkinfo);
exec("/usr/bin/netstat -I " . $ifinfo['if'] . " -nWb -f link", $linkinfo);
$linkinfo = preg_split("/\s+/", $linkinfo[1]);
if (preg_match("/*$/", $linkinfo[0])) {
$ifinfo['pppoelink'] = "down";
} else {
/ get PPPoE link status for dial on demand */
$ifinfo['pppoelink'] = "up";I did some testing and after rewriting it to this problem was solved:
/* PPPoE interface? -> get status from virtual interface /
case "pppoe":
unset($linkinfo);
exec("/usr/bin/netstat -I " . $ifinfo['if'] . " -nWb -f link", $linkinfo);
$linkinfo = preg_split("/\s+/", $linkinfo[1]);
if (preg_match("/pppoe0/", $linkinfo[0])) {
$ifinfo['pppoelink'] = "up";
} else {
/ get PPPoE link status for dial on demand */
$ifinfo['pppoelink'] = "down";I am not pretending that I know PHP and may be that breaks some code for multiple PPPoE connections but it works for single one which is that I need. This is not fix for multiple PPPoE connections.
Sasa
-
Yeah i missed pushing some fixes yesterday.
The next snapshots are fixed for sure. -
Howdies new here and not too expierianced with FreeBSD thought I would post what I believe to be same problem here. My current setup is 3 lan cards 2 intended to be wans and one lan 2 wans ppoe. Currently have updated my PFSense to "2.0-ALPHA-ALPHA built on Mon Mar 2 01:35:06 EST 2009 FreeBSD 7.1-RELEASE-p3" most rescent update applied is "pfSense-Full-Update-2.0-ALPHA-ALPHA-20090302-0135" once I configure the interfaces the console shows "Fatal error: Cannot redeclare interfaces_bring_up() (previously declared in /etc/inc/interfaces.inc:43) in /etc/inc/interfaces.inc on line 50" this error seems to have been in several builds. Will keep testing posted updates if u need any more information will try to get for you as long as I can find it.
-
Ok well I am going to get some sleep and start fresh again in morning. After the last time I updated the problem went away and I currently have 2 wans up though balancing is not going at the moment will start again fresh with latest snapshot at that time.
-
@ermal:
Yeah i missed pushing some fixes yesterday.
The next snapshots are fixed for sure.I have tested and it works now. You can disconnect and connect again from interfaces page. Automatic reconnect doesn't work. When, after 24h provider resets connection link stays down and there is message in log about PPTP connection not PPPoE. I can+t paste this message because I have lost it after restart (my mistake).
Sasa
-
Try next snap.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.