Softwarebrake after package install on my SG-1000

[Anwender41]

Hi,
First of all, sry for my bad English.

A few days ago, I want to install acme-package on my pfSense SG-1000. While installing I saw many lines with “remove php6” and then “installing php7”.
But that did not interest me for the time and I didn’t continue to watch the log.

After 1h I want to watch again on the WebGUI, but the server did not respond!
I connected to console, there would be many php errors in front of the normal pfSense interface. So I thought to uninstall php7 and acme and reinstall php6.

Unfortunately, I noticed that no internet is available anymore and I can’t install anything... Because of the php errors I can´t use all of the menu items, except the shell. However, I miss the knowledge for this.

That's why I took the pfSense for a day from the power and then accidentally connected the PC with the OTG port.
Since then appear in the console only every second "C".

I can’t say, which version is currently on the pfSense.

Please help me
Thanks a lot!

[jimp]

The C letters appearing on the console indicate that it can't locate any valid boot media. Reinstalling from USB or SD card recovery should get you running again, assuming it isn't a hardware issue. Contact support at https://go.netgate.com and someone can get you access to the firmware image for the SG-1000.